Green 1480/1550 nm Micro-Optic WDM MWDMG1514 Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thinfilm filter technology and patented athermal platform for optical device. This device has very flat and wide passband, low insertion loss, and high isolation which makes it ideal for combining pump (1480nm) and signal light (1550nm) in Optical Fiber Amplification Systems. The MWDM is used in high-power applications in DWDM systems. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. path. Performance Specificationns MWDMG1514 Series Min Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Typical Max Unit Type 1514 1528 1610 nm Type 1415 1440 1493 nm Environmental Green Plan Compliance Type 1514 1440 1493 nm Wide Operating Wavelength Range Type 1415 1528 1610 nm Low Insertion Loss 0.7 0.5 dB High Channel Isolation dB Highly Stable & Reliable dB Epoxy-free Optical Path Insertion Loss * Pass Channel @ λ1 Reflect Channel @ λ2 Isolation Reflect Channel @ λ1 Pass Channel @ λ2 14 30 Passband Ripple 0.15 Directivity 50 Return Loss 50 dB 0.1 dB Polarization Mode Dispersion 0.05 ps Maximum Power Handling 500 mW Fiber Type Corning SMF-28 Operating Temperature Storage Temperature 250 μm Bare Fiber 900 μm Loose Tube Ultra Flat Wide Passband dB Polarization Dependent Loss Package Dimensions ** Features 0 to +70 °C -40 to +85 °C P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm Applications Fiberoptic Amplifiers WDM Monitoring Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified R03.20081118 Green 1480/1550 nm Micro-Optic WDM MWDMG1514 Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 Wavelength 1480 nm pass = 1415 1550 nm pass = 1514 0 Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081118 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules