Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type Data Sheet 1 EMIFILr (LC Combined) Multilayer Type NFL21SP Series (0805 Size) c Dimensions c Insertion Loss Characteristics (Main Items) 0.4±0.2 Insertion Loss (dB) 0.6±0.2 1.25±0.1 (2) (1) NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 20 2.0±0.2 (3) (2) (50Ω - 50Ω) 0 0.85±0.1 0.3±0.2 40 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 60 0.25±0.2 80 1 : Electrode 10 (in mm) c Equivalent Circuit 100 Frequency (MHz) 1000 2000 c Packaging Input (Output) (1) Code Packaging D 180mm Paper Tape Minimum Quantity 4000 B Bulk(Bag) 1000 Output (Input) (3) GND (2) No polarity. c Rated Value (p: packaging code) Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage Operating Temperature Range NFL21SP106X1C3p 10MHz 670pF±20% 680nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP206X1C7p 20MHz 240pF±20% 700nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP506X1C3p 50MHz 84pF±20% 305nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP706X1C3p 70MHz 76pF±20% 185nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP107X1C3p 100MHz 44pF±20% 135nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP157X1C3p 150MHz 28pF±20% 128nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP207X1C3p 200MHz 22pF±20% 72nH±20% 250mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP307X1C3p 300MHz 19pF±10% 45nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP407X1C3p 400MHz 16pF±10% 34nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C NFL21SP507X1C3p 500MHz 12pF±10% 31nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C Number of Circuits: 1 Continued on the following page. oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/