NJW1310 Advanced information PRELIMINARY AV SWITCH ■GENERAL DESCRIPTION The NJW1310 is an Audio / Video switch for TV. All of functions are controlled by I2C BUS interface. The NJW1310 includes 7-input 2-output Audio switches. Also it includes 5-input 2-output Video switches, and 2-input 2-output YUV switches. ■ PACKAGE OUTLINE NJW1310FC2 ■FEATURES ● Operating Voltage ● 7-Input 2-output Audio Switches ● 5-Input 2-output Video Switches ● 2-Input 2-output YUV Switches ● Y/C MIX Circuit ● S-Input Detection ● Wide Range Video Amplifier ● Audio Muting from External Pin ● Wide Range Audio Amplifier ● Includes Auxiliary DC Outputs ● I2C BUS Interface ● Bi-CMOS Technology ● Package Outline 8 to 13V 20MHz, -3dB 3Vrms typ. QFP80 ■FUNCTION BLOCK DIAGRAM C-Video IN1 C-Video IN2 C-Video IN3 C-Video IN4 Composite/YC Selector C-Video/YC OUT1 C-Video/YC OUT2 C-Video IN5 YC IN1 YC IN2 YC IN3 YUV IN1 YUV IN2 YUV Selector YUV OUT1 Audio Selector Stereo Audio OUT1 Stereo Audio IN1 Stereo Audio IN7 YUV OUT2 Stereo Audio OUT2 -1- NJW1310 ■BLOCK DIAGRAM (Video System) TV1 TV2 8-1 SW 2-1 SW V1 6dB amp. VOUT1 V2 V3 TRAP1 Y1 Y2 6-1 SW Y3 6dB amp. 2-1 SW 2-1 SW YOUT1 YIN1 C1 C2 C3 6-1 SW 2-1 SW 6dB amp. COUT1 CIN1 SDETIN1 DUTY1 CAP1 8-1 SW S-DET 2-1 SW 6dB amp. VOUT2 TRAP2 SDETIN2 DUTY2 CAP2 SDETIN3 DUTY3 CAP3 S-DET 6-1 SW 6dB amp. 2-1 SW YOUT2 YIN2 S-DET 6-1 SW 6dB amp. 2-1 SW COUT2 CIN2 DY1 DY2 DU1 DU2 DV1 DV2 3-1 SW 6dB amp. DYOUT1 3-1 SW 6dB amp. DUOUT1 3-1 SW 6dB amp. DVOUT1 3-1 SW 6dB amp. DYOUT2 3-1 SW 6dB amp. DUOUT2 3-1 SW 6dB amp. DVOUT2 VGND Bias Logic -2- NJW1310 Advance information ■BLOCK DIAGRAM (Audio System, Logic System) LTV1 LTV2 LV1 LV2 LV3 LD1 LD2 RTV1 RTV2 RV1 RV2 RV3 RD1 RD2 8 to 1 SW 0 / 6dB 2to1 SW LOUT1 8 to 1 SW 0 / 6dB 2to1 SW ROUT1 8 to 1 SW 6dB 2to1 SW LOUT2 8 to 1 SW 6dB 2to1 SW ROUT MUTE AGND AUDIO BIAS VIDEO BIAS 0dB Vcc BIAS 0dB LOGIC SYSTEM including I2C BUS BLOCK SCL SDA ADR S-1 S-2 S-3 S2-1 S2-2 S2-3 DC OUT AUXOUT1 AUXOUT2 -3- NJW1310 ■ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage V+ 15 V Power Dissipation PD 1300 mW Operating Temperature Range Topr -40 to +85 °C Storage Temperature Range Tstg -40 to +125 °C ■ELECTRICAL CHARACTERISTICS ( Ta=25°C, V+=9V) PARAMETER SYMBOL Operating Voltage V+ Supply Current Icc Reference Voltage VREF TEST CONDITION No Signal No Signal MIN. TYP. MAX. UNIT 8.0 9.0 13.0 V 56 80 104 mA 4.0 4.5 5.0 V MIN. TYP. MAX. UNIT 5.9 6.4 6.9 dB - 15 - MHz - 20 - MHz 1.4 - - Vp-p - - -50 dB MIN. TYP. MAX. UNIT -1 0 1 dB 50 - - kHz - 0.03 - % 2.8 3.0 - Vrms - -80 - dB - -55 -40 dB -30 - 30 mV - 20 - uVrms ● Video system PARAMETER Gain SYMBOL GVV Frequency Response Characteristics Frequency Response Characteristics (YUV) FBW V1 FBW V2 Input Dynamic Range Ddv Cross Talk Vctv TEST CONDITION f=100kHz, 0.3Vp-p input f=100kHz, input frequency where output amplitude is -3dB with 0.3Vp-p output serving as 0dB f=100kHz, maximum with distortion < 1.0% f=4.43MHz, 1Vp-p input ● Audio system PARAMETER Gain SYMBOL GVA Frequency Response Characteristics FBW A Total Harmonic Distortion THD Input Dynamic Range DdA Cross Talk Vctv Ripple Rejection Ratio VrrA Output DC Offset Voff Output Noise Voltage VNO -4- TEST CONDITION f=1kHz, 1Vrms input, 5.7kΩ resistor inserted to input f=1kHz, input frequency where output amplitude is -3dB with 1Vrms output serving as 0dB f=1kHz, 1Vrms input, where 400Hz HPF + 80kHz LPF are inserted f=1kHz, maximum with distortion < 0.3% f=1kHz, 1Vrms input f=100Hz, 100mVrms applied to Vcc Offset voltage between input and output No signal JIS-A NJW1310 Advance information ■ELECTRICAL CHARACTERISTICS ( Ta=25°C, V+=9V) ●Audio system PARAMETER High Level Mute Control Voltage Low Level Mute Control Voltage SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT VmuH Mute on 2.0 - V+ V VmuL Mute off 0 - 0.5 V MIN. TYP. MAX. UNIT 4.0 - - V - - 0.5 V ●Logic system PARAMETER High Level Auxiliary Output Voltage Low Level Auxiliary Output Voltage SYMBOL TEST CONDITION VAUXH Isource=100uA VAUXL Isink=100uA -5- NJW1310 ●I2C BUS (SDA, SCL) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT High Level Input Voltage VIH 3.0 - 5.0 V Low Level Input Voltage VIL 0 - 1.5 V Low Level Output Voltage VOL 0 - 0.4 V High Level Input Current IIH VIH=4.5V 0 - 10 uA Low Level Input Current IIL VIL=0.4V 0 - 10 uA fSCL 0 - 100 kHz tBUF 4.7 - - us tHD;STA 4.0 - - us tLOW 4.7 - - us tHIGH 4.0 - - us tSU;STA 4.7 - - us Minimum Data Hold Time tHD;DAT 300 - - ns Minimum Data Preparation Time tSU;DAT 250 - - ns Rise Time tR - - 1 us Fall Time tF - - 300 ns tSU;STO 4.7 - - us Maximum Clock Frequency Minimum Waiting Time for Data Change Minimum Waiting Time for Data Transfer Start Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Waiting Time for Start Preparation Minimum Waiting Time for Stop Preparation With SDA 3mA current supplied I2C BUS Load Condition:Pull up resistance 4kΩ(Connected to +5V) Load Capacitance 200pF(Connected to GND) SDA tBUF tR tF tHD:STA SCL tHD:STA P -6- S tLOW tHD:DAT tHIGH tSU:STA tSU:DAT Sr tSU:STO P NJW1310 Advance information ■DESCRIPTION OF I2C BUS INTERFACE The NJW1310 has two function mode with I2C BUS interface, receive mode and transmit mode. And the NJW 1310 can use two slave addresses, so it’s possible to control two NJW1310 with one Master. ●SLAVE ADDRESSES S MSB LSB 1 SLAVE ADDRESS 0 1 0 0 ADR R/W 0 ★Two Slave Addresses are available by to set the Bit ADR to either “0”, or “1”. ●RECEIVE MODE ◆CONSTRUCT OF CONTROL REGISTER MSB S 1 LSB 0 MSB LSB DATA2 b7 MSB SLAVE ADDRESS ACK 0 1 0 0 ADR 0 b7 b6 b5 b4 b3 b2 b1 b0 LSB DATA1 b6 b5 b4 b3 b2 b1 MSB ACK b0 LSB DATA3 b7 ACK b6 b5 b4 b3 b2 b1 b0 ACK P ★Bit R/W must be “0”, to function the NJW1310 with receive mode. ★Bit ADR specify the slave address. ADR 0 : 90H 1 : 92H ◆INVALID DATA PROCESSING 1) Different slave address. MSB LSB SLAVE ADDRESS S MSB MSB LSB DATA2 LSB DATA1 ACK MSB ACK LSB DATA3 ACK ACK P When the NJW1310 receives a different slave address, no acknowledgement from the NJW1310 is replied. 2) Incomplete data format MSB LSB SLAVE ADDRESS S MSB LSB DATA1 ACK ACK P As an example, if the NJW1310 receives only 1st data, the NJW1310 ignores the 1st data. 3) Too long data format MSB LSB SLAVE ADDRESS S MSB MSB LSB DATA2 MSB LSB DATA1 ACK MSB ACK LSB DATA3 ACK ACK LSB DATA4 ACK P As an example, if the NJW1310 receives 4th data, the NJW1310 ignores the 4th data. In addition, no acknowledgement after 4th data is replied. -7- NJW1310 ◆CONSTRUCT OF DATA1 TO DATA3 MSB LSB b7 b6 b5 b4 b3 b2 b1 b0 DATA1 S/COMP1 V-OUTPUT1 A-OUTPUT1 VMODE DATA2 S/COMP2 V-OUTPUT2 A-OUTPUT2 A-GAIN DATA3 V-OUTPUT3 V-OUTPUT4 AUX1 AUX2 S2OUT All resisters are reset to “0” when power on. ◆DETAILS OF EACH BIT < V-OUTPUT1, VOUTPUT2 > These Bit specify the input line which are sent to the port VOUT1, YOUT1, COUT1, VOUT2, YOUT2, and COUT2. V-OUTPUT1 V-OUTPUT2 VOUT1, YOUT1, COUT1 VOUT2, YOUT2, COUT2 b6 b5 b4 selected input line 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 MUTE TV1 TV2 V1, Y1/C1 V2, Y2/C2 V3, Y3/C3 DY1 DY2 < S/COMP1, S/COMP2 > These Bit specify the types of the input signals which are sent to the port VOUT1, YOUT1, COUT1, VOUT2, YOUT2, and COUT2. S/COMP2 VOUT1, YOUT1, COUT1 VOUT2, YOUT2, COUT2 b7 selected type 0 1 Composite S input S/COMP1 ★Normally, the fixing of Video output signals needs the selection of both the input signal line and the types of the input signal. < VMODE > These Bit specify the types of the VOUT1 signals which are sent to the port YOUT1, VOUT1 YOUT1 b0 0 1 selected type S input VOUT1 -8- Advance information NJW1310 < V-OUTPUT3, V-OUTPUT4 > These Bit specify the input line which are sent to the port DYOUT1, DUOUT1, DVOUT1, DYOUT2, DUOUT2, and DVOUT2. V-OUTPUT3 V-OUTPUT4 b7 b5 b6 b4 DYOUT1, DUOUT1, DVOUT1 DYOUT2, DUOUT2, DVOUT2 selected input line 0 0 1 1 0 1 0 1 MUTE DY1, DU1, DV1 DY2, DU2, DV2 Reserved < A-OUTPUT1, A-OUTPUT2 > These Bit specify the input line which are sent to the port LOUT1, ROUT1,LOUT2, and ROUT2. A-OUTPUT1 A-OUTPUT2 LOUT1, ROUT1 LOUT2, ROUT2 b3 b2 b1 selected input line 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 MUTE LTV1, RTV1 LTV2, RTV2 LV1, RV1 LV2, RV2 LV3, RV3 LD1, RD1 LD2, RD2 ★In each Audio output signals, both L ch. and R ch. are changed at the same time. < A-GAIN > This Bit specify the output gain of the port LOUT1, ROUT1. A-GAIN LOUT1, ROUT1 b0 0 1 output gain +6dB 0dB < AUX1, AUX2 > These Bit specify the output DC voltage of port AUXOUT1, and AUXOUT2. AUX1 AUX2 b3 b2 AUXOUT1 AUXOUT2 output DC voltage 0 1 Low High -9- NJW1310 < S2OUT > These Bit specify the output DC voltage of port DCOUT. S2OUT DCOUT b1 b0 output DC voltage 0 0 1 1 0 1 0 1 4.2V 1.9V 0V 4.2V - 10 - NJW1310 Advance information ●TRANSMIT MODE ◆CONSTRUCT OF CONTROL REGISTER MSB S LSB 1 0 MSB SLAVE ADDRESS ACK 0 1 0 0 ADR 1 b7 LSB b6 b5 DATA1 b4 b3 b5 DATA2 b4 b3 b2 b1 MSB b7 b0 ACK LSB b6 b2 b1 b0 ACK P ★Bit R/W must be “1”, to function the NJW1310 with transmit mode. ★Bit ADR specify the slave address. ADR 0 : 91H 1 : 93H ◆CONSTRUCT OF DATA1 TO DATA2 MSB LSB b7 DATA1 S-1 DATA2 b6 b5 S-2 S-3 S2-1 b4 b3 0 S-DET1 S2-2 S2-3 b2 b1 b0 S-DET2 S-DET3 0 0 0 0 : means Low level output All resisters are reset to “0” when power on. ◆DETAILS OF EACH BIT < S-1, S-2, S-3 > These Bit show the input DC voltage level of port S-1, S-2, and S-3. S-1 S-2 S-3 b7 b6 b5 S-1 S-2 S-3 0 1 DC voltage level DC > 3.5V DC < 3.5V < S-DET1, S-DET2, S-DET3 > These Bit show the existence of the input signals of port S-DETIN1,S-DETIN2, and S-DETIN3. S-DET1 S-DET2 S-DET3 b3 b2 b1 S-DETIN1 S-DETIN2 S-DETIN3 existence of signals 0 1 none exist < S2-1, S2-2, S2-3 > These Bit show the input DC voltage level of port S2-1, S2-2, and S2-3. S2-1 S2-2 S2-3 b7 b5 b3 b6 b4 b2 S2-1 S2-2 S2-3 DC voltage level 0 0 1 0 0 1 1 0 DC < 1.3V 1.3V < DC < 2.5V DC > 2.5V ports are open - 11 - NJW1310 ●SWITCH CONTROL TABLE ■ V-OUTPUT1 DATA1 Hex b7 S/COMP1 b6 b5 b4 V-OUTPUT1 Output Signal b3 b2 b1 A-OUTPUT1 b0 VMODE VOUT1 YOUT1 COUT1 LOUT1 ROUT1 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE 12H 0 0 0 1 0 0 1 0 TV1 YIN1 CIN1 LTV1 RTV1 24H 0 0 1 0 0 1 0 0 TV2 YIN1 CIN1 LTV2 RTV2 36H 0 0 1 1 0 1 1 0 V1 YIN1 CIN1 LV1 RV1 48H 0 1 0 0 1 0 0 0 V2 YIN1 CIN1 LV2 RV2 5AH 0 1 0 1 1 0 1 0 V3 YIN1 CIN1 LV3 RV3 6CH 0 1 1 0 1 1 0 0 DY1 YIN1 CIN1 LD1 RD1 7EH 0 1 1 1 1 1 1 0 DY2 YIN1 CIN1 LD2 RD2 80H 1 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE 92H 1 0 0 1 0 0 1 0 MUTE MUTE MUTE LTV1 RTV1 A4H 1 0 1 0 0 1 0 0 MUTE MUTE MUTE LTV2 RTV2 B6H 1 0 1 1 0 1 1 0 Y1/C1 MIX Y1 C1 LV1 RV1 C8H 1 1 0 0 1 0 0 0 Y2/C2 MIX Y2 C2 LV2 RV2 DAH 1 1 0 1 1 0 1 0 Y3/C3 MIX Y3 C3 LV3 RV3 ECH 1 1 1 0 1 1 0 0 DY1/DU1 MIX DY1 DU1 LD1 RD1 FEH 1 1 1 1 1 1 1 0 DY2/DU2 MIX DY2 DU2 LD2 RD2 01H 0 0 0 0 0 0 0 1 MUTE MUTE MUTE MUTE MUTE 13H 0 0 0 1 0 0 1 1 TV1 TV1 CIN1 LTV1 RTV1 25H 0 0 1 0 0 1 0 1 TV2 TV2 CIN1 LTV2 RTV2 37H 0 0 1 1 0 1 1 1 V1 V1 CIN1 LV1 RV1 49H 0 1 0 0 1 0 0 1 V2 V2 CIN1 LV2 RV2 5BH 0 1 0 1 1 0 1 1 V3 V3 CIN1 LV3 RV3 6DH 0 1 1 0 1 1 0 1 DY1 DY1 CIN1 LD1 RD1 7FH 0 1 1 1 1 1 1 1 DY2 DY2 CIN1 LD2 RD2 81H 1 0 0 0 0 0 0 1 MUTE MUTE MUTE MUTE MUTE 93H 1 0 0 1 0 0 1 1 MUTE MUTE MUTE LTV1 RTV1 A5H 1 0 1 0 0 1 0 1 MUTE MUTE MUTE LTV2 RTV2 B7H 1 0 1 1 0 1 1 1 Y1/C1 MIX Y1/C1 MIX C1 LV1 RV1 C9H 1 1 0 0 1 0 0 1 Y2/C2 MIX Y2/C2 MIX C2 LV2 RV2 DBH 1 1 0 1 1 0 1 1 Y3/C3 MIX Y3/C3 MIX C3 LV3 RV3 EDH 1 1 1 0 1 1 0 1 DY1/DU1 MIX DY1/DU1 MIX DU1 LD1 RD1 FFH 1 1 1 1 1 1 1 1 DY2/DU2 MIX DY2/DU2 MIX DU2 LD2 RD2 - 12 - NJW1310 Advance information ■ A-OUTPUT1* DATA1 Hex b7 S/COMP1 b6 b5 b4 Output Signal b3 b2 b1 V-OUTPUT1 A-OUTPUT1 b0 VMODE VOUT1 YOUT1 COUT1 LOUT1 ROUT1 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE 12H 0 0 0 1 0 0 1 0 TV1 YIN1 CIN1 LTV1 RTV1 24H 0 0 1 0 0 1 0 0 TV2 YIN1 CIN1 LTV2 RTV2 36H 0 0 1 1 0 1 1 0 V1 YIN1 CIN1 LV1 RV1 48H 0 1 0 0 1 0 0 0 V2 YIN1 CIN1 LV2 RV2 5AH 0 1 0 1 1 0 1 0 V3 YIN1 CIN1 LV3 RV3 6CH 0 1 1 0 1 1 0 0 DY1 YIN1 CIN1 LD1 RD1 7EH 0 1 1 1 1 1 1 0 DY2 YIN1 CIN1 LD2 RD2 ■ V-OUTPUT2 DATA2 Hex b7 S/COMP2 b6 b5 b4 V-OUTPUT2 Output Signal b3 b2 b1 A-OUTPUT2 b0 A-GAIN VOUT2 YOUT2 COUT2 LOUT2 ROUT2 LOUT1, ROUT1 GAIN 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE 6dB 12H 0 0 0 1 0 0 1 0 TV1 YIN2 CIN2 LTV1 RTV1 6dB 24H 0 0 1 0 0 1 0 0 TV2 YIN2 CIN2 LTV2 RTV2 6dB 36H 0 0 1 1 0 1 1 0 V1 YIN2 CIN2 LV1 RV1 6dB 48H 0 1 0 0 1 0 0 0 V2 YIN2 CIN2 LV2 RV2 6dB 5AH 0 1 0 1 1 0 1 0 V3 YIN2 CIN2 LV3 RV3 6dB 6CH 0 1 1 0 1 1 0 0 DY1 YIN2 CIN2 LD1 RD1 6dB 7EH 0 1 1 1 1 1 1 0 DY2 YIN2 CIN2 LD2 RD2 6dB 81H 1 0 0 0 0 0 0 1 MUTE MUTE MUTE MUTE MUTE (0dB) 93H 1 0 0 1 0 0 1 1 MUTE MUTE MUTE LTV1 RTV1 0dB A5H 1 0 1 0 0 1 0 1 MUTE MUTE LTV2 RTV2 0dB B7H 1 0 1 1 0 1 1 1 Y1 C1 LV1 RV1 0dB C9H 1 1 0 0 1 0 0 1 Y2 C2 LV2 RV2 0dB DBH 1 1 0 1 1 0 1 1 Y3 C3 LV3 RV3 0dB EDH 1 1 1 0 1 1 0 1 DY1 DU1 LD1 RD1 0dB FFH 1 1 1 1 1 1 1 1 MUTE Y1/C1 MIX Y2/C2 MIX Y3/C3 MIX DY1/DU1 MIX DY2/DU2 MIX DY2 DU2 LD2 RD2 0dB - 13 - NJW1310 ■ A-OUTPUT2 DATA2 b7 Hex b6 S/COMP2 b5 Output Signal b4 b3 b2 V-OUTPUT2 b1 A-OUTPUT2 LOUT1, VOUT2 YOUT2 COUT2 LOUT2 ROUT2 ROUT1 A-GAIN GAIN b0 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE 6dB 12H 0 0 0 1 0 0 1 0 TV1 YIN2 CIN2 LTV1 RTV1 6dB 24H 0 0 1 0 0 1 0 0 TV2 YIN2 CIN2 LTV2 RTV2 6dB 36H 0 0 1 1 0 1 1 0 V1 YIN2 CIN2 LV1 RV1 6dB 48H 0 1 0 0 1 0 0 0 V2 YIN2 CIN2 LV2 RV2 6dB 5AH 0 1 0 1 1 0 1 0 V3 YIN2 CIN2 LV3 RV3 6dB 6CH 0 1 1 0 1 1 0 0 DY1 YIN2 CIN2 LD1 RD1 6dB 7EH 0 1 1 1 1 1 1 0 DY2 YIN2 CIN2 LD2 RD2 6dB ■ A-GAIN DATA2 b7 Hex b6 S/COMP2 00H b4 b3 V-OUTPUT2 0 FFH b5 Output Signal 0 1 0 1 b1 A-OUTPUT2 0 1 b2 0 1 1 0 1 VOUT2 LOUT1, YOUT2 COUT2 LOUT2 ROUT2 ROUT1 GAIN 0 MUTE MUTE MUTE MUTE MUTE 6dB 1 DY2/DU2 MIX DY2 DU2 LD2 RD2 0dB b0 A-GAIN 0 1 ■ V-OUTPUT3 DATA3 Hex Output Signal b7 b6 b5 b4 b3 b2 b1 b0 DVOUT DUOUT DVOUT DVOUT DUOUT DVOUT AUXOUT AUXOUT DCOUT AUX AUX VV1 2 1 1 1 2 2 2 S2OUT OUTPUT3 OUTPUT4 1 2 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 40H 0 1 0 0 0 0 0 0 DY1 DU1 DV1 MUTE MUTE MUTE Low Low 16vs9 80H 1 0 0 0 0 0 0 0 DY2 DU2 DV2 MUTE MUTE MUTE Low Low 16vs9 C0H 1 1 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 ■ V-OUTPUT4 DATA3 b7 Hex b6 VOUTPUT3 b5 b4 Output Signal b3 b2 AUX AUX VOUTPUT4 1 2 b1 b0 S2OUT DVOUT DUOUT DVOUT DVOUT DUOUT DVOUT AUXOUT AUXOUT DCOUT 1 2 1 1 1 2 2 2 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 10H 0 0 0 1 0 0 0 0 MUTE MUTE MUTE DY1 DU1 DV1 Low Low 16vs9 20H 0 0 1 0 0 0 0 0 MUTE MUTE MUTE DY2 DU2 DV2 Low Low 16vs9 30H 0 0 1 1 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 - 14 - NJW1310 Advance information ■ AUXOUT1 DATA3 Output Signal b7 b6 b5 b4 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 08H 0 0 0 0 1 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE High Low 16vs9 Hex b3 b2 b1 b0 DVOUT DUOUT DVOUT DVOUT DUOUT DVOUT AUXOUT AUXOUT DCOUT AUX AUX VV1 2 1 1 1 2 2 2 S2OUT OUTPUT3 OUTPUT4 1 2 ■ AUXOUT2 DATA3 Output Signal b7 b6 b5 b4 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 04H 0 0 0 0 0 1 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low High 16vs9 Hex b3 b2 b1 b0 DVOUT DUOUT DVOUT DVOUT DUOUT DVOUT AUXOUT AUXOUT DCOUT AUX AUX VV1 2 1 1 1 2 2 2 S2OUT OUTPUT3 OUTPUT4 1 2 ■ S2OUT DATA3 b7 Hex b6 VOUTPUT3 b5 b4 Output Signal b3 b2 AUX AUX VOUTPUT4 1 2 b1 b0 S2OUT DVOUT DUOUT DVOUT DVOUT DUOUT DVOUT AUXOUT AUXOUT DCOUT 1 2 1 1 1 2 2 2 00H 0 0 0 0 0 0 0 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 01H 0 0 0 0 0 0 0 1 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 4vs3 02H 0 0 0 0 0 0 1 0 MUTE MUTE MUTE MUTE MUTE MUTE Low Low Letter 03H 0 0 0 0 0 0 1 1 MUTE MUTE MUTE MUTE MUTE MUTE Low Low 16vs9 ■Note Purchase of I2C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 15 -