PRELIMINARY DATA SHEET RECEIVER NR3315TA Series InGaAs PIN-PD RECEIVER WITH INTERNAL PRE-AMPLIFIER FOR 10 Gb/s APPLICATIONS DESCRIPTION The NR3315TA Series consists of InGaAs PIN coaxial module with internal pre-amplifiers designed for 10 Gb/s optical transceivers such as a 300-pin transponder. These modules are ideal as receivers for SONET OC-192 systems. FEATURES • XMD-MSA compliant • 10 Gb/s high sensitivity InGaAs PIN-PD • +3.3 V InP transimpedance pre-amplifier • Minimum receiver sensitivity Pr = −20 dBm • Operating case temperature TC = −5 to +85°C • Transimpedance Zt = 6 000 Ω (Single-ended) • Cut-off frequency fc = 8 GHz • With flexible printed circuit The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PL10779EJ01V0DS (1st edition) Date Published September 2009 NS Printed in Japan 2009 NR3315TA Series PACKAGE DIMENSIONS (UNIT: mm, unless otherwise specified ±0.1 mm) offset (0.2) (22 MAX.) 3.0 MAX. (7) 3.5 MAX. 1.0 (3) 4.0 MAX. 1.0 MAX. 1.2±0.1 4.4 0.8 1.2 MRP φ 5.2 φ 4.0 φ 4.7 φ 5.5±0.05 φ 5.6 MAX. BOTTOM VIEW 13.4 16.3 2 0.27 0.1 2.0 Preliminary Data Sheet PL10779EJ01V0DS 5.6 5.6 6–0.35 5–0.79 1.0 2–R0.35 Vpd GND DATA N DATA P GND VCC NR3315TA Series OPTICAL FIBER CHARACTERISTICS Parameter Specification Unit 9.5±1 μm − μm 125±2 μm 2 % 1.6 % 0.9±0.1 mm 1 100 to 1 270 nm 30 mm 1 000 TYP. mm Mode Field Diameter Core Diameter Cladding Diameter Maximum Cladding Noncircularity Maximum Core/Cladding Concentricity Outer Diameter Cut-off Wavelength Minimum Fiber Bending Radius Fiber Length Flammability UL1581 VW-1 SC-UPC Connector 8.99±0.5 mm 35±2 mm Fiber Length: 1 000 mm TYP. BLOCK DIAGRAM Vpd VCC 100 pF GND 100 pF GND PD DATA P TIA DATA N GND Preliminary Data Sheet PL10779EJ01V0DS 3 NR3315TA Series ORDERING INFORMATION Part Number Connector Type NR3315TA-CC SC-UPC NR3315TA-EC LC-UPC Note Differential output with flexible PCB ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit PIN-PD Reverse Voltage VR 10 V PIN-PD Reverse Current IR 10 mA IC Supply Voltage VCC −0.7 to +5.0 V Operating Case Temperature TC −5 to +85 °C Storage Temperature Tstg −40 to +85 °C Maximum AOP Input Pin +5 dBm Tsld 260 (10 sec.) °C (ER < 5.4 dB (1.1 A/W)) Lead Soldering Temperature (Flexible Printed Circuit) RECOMMENDED OPERATING CONDITION Parameter Symbol MIN. TYP. MAX. Unit PIN-PD Reverse Voltage VR 3.1 3.3 3.5 V IC Supply Voltage VCC +3.1 +3.3 +3.5 V Operating Case Temperature TC −5 +25 +85 °C ELECTRO-OPTICAL CHARACTERISTICS (λ = 1 310 nm/1 550 nm, unless otherwise specified) Parameter Symbol Sensitivity S Transimpedance Zt Conditions RL = 50 Ω, Pin = −20 dBm, MIN. TYP. MAX. Unit 0.7 0.9 A/W 3 000 6 000 Ω Single-ended Maximum Output Voltage Swing Cut-off Frequency Vclip fC Single-ended 100 RL = 50 Ω, Pin = −17 dBm, 6.5 350 8 mVpp GHz −3 dB from 1 GHz Pr 9.95 Gb/s, BER = 10− , Overload PO PRBS = 2 −1, ER > 10 dB, NRZ, IC Supply Current ICC 50 mA ORL −27 dB Minimum Receiver Sensitivity −20 12 −17 dBm 31 Optical Return Loss 4 λ = 1 550 nm Preliminary Data Sheet PL10779EJ01V0DS +0.5 +2 dBm NR3315TA Series REFERENCE Document Name Opto-Electronics Devices Pamphlet Document No. PX10160E Preliminary Data Sheet PL10779EJ01V0DS 5 NR3315TA Series • The information in this document is current as of September, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E 6 Preliminary Data Sheet PL10779EJ01V0DS NR3315TA Series Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. Caution Optical Fiber A glass-fiber is attached on the product. Handle with care. • When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments.