NV2M Patent No. 01330295.7 023121297 18.2×17.4×13.8 (2A,2C) 18.0×9.5×13.6 (1A,1C) Q Type: 22.8×22.3×20.4 Features Small size, light weight. Low coil power consumption. Switching capacity up to 20A. PC board mounting. Suitable for automobile, automation system, electronic equipment, instrument, meter, telecommunication facilities and remote control facilities. Ordering Information NV2M Q 1C Z DC12V 1 2 3 4 5 1 Part number:NV2M 2 NIL:Standard;Q:Quiet type 3 Contact arrangement:1A:1A;1C:1C 2A:2A; 2C:2C 0.6 6 4 Enclosure:S: Sealed type;Z: Dust cover 5 Coil rated Voltage(V):DC:12 6 Coil power consumption:0.56:0.56W;0.6:0.6W;0.8: 0.8W Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life Electrical Mechanical 1ASPSTNO, 1CSPDT(B-M)2ADPSTNO, 2CDPDT(B-M) AgSnO2 NO:20A/14VDC NC:15A/14VDC 280W 40VDC Max. Switching Current:20A አ30m or 30mV at 10A max make time 15s Item 3.12 of IEC255-7 2105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 Coil Parameter Dash numbers Coil voltage VDC Rated 012-800 012-600 012-560 12 12 12 Coil resistance ±10% Pickup voltage VDC(max) (58%of rated voltage ) release voltage VDC(min) (9% of rated voltage) Coil power consumption W Operate Time ms Release Time ms 180 240 260 6.9 6.9 6.9 1 1 1 0.8 0.6 0.56 3 3 3 1.2 1.2 1.2 Max. 18 18 18 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. Sound Pre. Characteristics (Q type) Operation noise<50db Coil voltage :12VDC 125 www.dblectro.com NV2M Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100M min (at 500VDC) Item 7 of IEC255-5 50Hz 500V 50Hz 500V Item 6 Item 6 Functional300m/s2 Survival450 m/s2 10~100Hz 100 m/s2 Double amplitude 1.5mm 5N 2352 30.5s -40~85 85% (at 40) 5g IEC68-2-27 Test Ea of IEC255-5 of IEC255-5 IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3 Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. 1.6 Dimensions (Unit: mm) 9.5 18.0 22.3 22.8 13.6 4-0.4×0.4 2.2 2-Φ0.55 17.4 (Quiet type) 13.8 1.6 18.2 4±0.2 0.4 2C 6-0.4×0.9 6-0.9×0.9 3.2 4±0.2 3-0.4×0.9 0.5 1.5 20.4 2 0.3 1C 2.2 4-Φ0.55 (Standard Type) Dimensions 11.3 3.8 6- 1.3 8 3 2 7 1 6 3.2 18.8 Mounting (Bottom views) 22.8 16.9 10 9 3.8 5 9,5 4 mm 0.3 0.4 0.55 0.9 1.3 1.5 1.6 2.0 2.2 2.5 3.2 3.6 3.75 3.8 5.0 9.5 11.25 13.75 13.8 17.4 18.2 18.8 20.4 22.3 22.8 Wiring diagram(Bottom views) NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. www.dblectro.com >àçÇá 0.012 0.016 0.022 0.035 0.051 0.059 0.063 0.079 0.087 0.098 0.126 0.142 0.148 0.150 0.197 0.374 0.443 0.541 0.543 0.685 0.717 0.740 0.803 0.878 0.898