UNISONIC TECHNOLOGIES CO., LTD 2SC3355 NPN SILICON EPITAXIAL TRANSISTOR HIGH FREQUENCY LOW NOISE AMPLIFIER FEATURES * Low Noise and High Gain * High Power Gain 1 TO-92 ORDERING INFORMATION Normal 2SC3355-T92-B 2SC3355-T92-K 2SC3355-T92-R 2SC3355L-T92-B Ordering Number Lead Free 2SC3355L-T92-B 2SC3355L-T92-K 2SC3355L-T92-R Halogen Free 2SC3355G-T92-B 2SC3355G-T92-K 2SC3355G-T92-R Package Packing TO-92 TO-92 TO-92 Tape Box Bulk Tape Reel (1)Packing Type (1) B: Tape Box, T: Tape Reel (2)Package Type (2) T92: TO-92 (3)Lead Free (3) G: Halogen Free, L: Lead Free, Blank: Pb/Sn www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD 1 of 2 QW-R201-036.Ba 2SC3355 NPN SILICON EPITAXIAL TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-base voltage VCBO 20 V Collector-emitter voltage VCEO 12 V Emitter-base voltage VEBO 3 V Collector current IC 100 mA Total power dissipation PT 600 mW ℃ Junction Temperature TJ 125 ℃ Operating Temperature TOPR -20 ~ +85 ℃ Storage Temperature TSTG -40 ~ +150 Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied 2.The device is guaranteed to meet performance specification within 0℃~70℃ operating temperature range and assured by design from –20℃~85℃. ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) PARAMETER Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain bandwidth Product Feed-Back Capacitance Noise Figure SYMBOL ICBO IEBO hFE fT Cre NF TEST CONDITIONS VCB=10V, IE=0 VEB=1V, IC=0 VCE=10V, IC=20mA VCE=10V, IC=20mA VCB=10V, IE=0, f=1.0MHz VCE=10V, IC=7mA, f=1.0GHz MIN TYP 50 MAX 1.0 1.0 300 7 1.0 1.1 UNIT µA µA GHz pF dB UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R201-036.Ba