2SC5075 TOSHIBA Transistor Silicon NPN Triple Diffused Type 2SC5075 Industrial Applications Switching Regulator and High-Voltage Switching Applications High-Speed DC-DC Converter Applications • High-speed switching: tr = 1.0 μs (max), tf = 1.0 μs (max) • High breakdown voltage: VCEO = 400 V Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 500 V Collector-emitter voltage VCEO 400 V Emitter-base voltage VEBO 7 V Collector current IC 2 A Base current IB 0.5 A Collector power dissipation PC 1.3 W Junction temperature Tj 150 °C Tstg −55 to 150 °C Storage temperature range JEDEC ― JEITA ― TOSHIBA 2-8M1A Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.55 g (typ.) temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-10 2SC5075 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 400 V, IE = 0 ― ― 100 μA Emitter cut-off current IEBO VEB = 7 V, IC = 0 ― ― 1 mA Collector-base breakdown voltage V (BR) CBO IC = 1 mA, IE = 0 500 ― ― V Collector-emitter breakdown voltage V (BR) CEO IC = 10 mA, IB = 0 400 ― ― V VCE = 5 V, IC = 0.1 A 20 ― ― VCE = 5 V, IC = 1 A 8 ― ― DC current gain hFE Collector-emitter saturation voltage VCE (sat) IC = 1 A, IB = 0.2 A ― ― 1.0 V Base-emitter saturation voltage VBE (sat) IC = 1 A, IB = 0.2 A ― ― 1.5 V ― ― 1.0 ― ― 2.5 ― ― 1.0 20 μs Input Storage time tstg IB2 Switching time IB1 IB2 Output 250 Ω ton IB1 Rise time μs VCC ≈ 200 V Fall time tf IB1 = −IB2 = 0.08 A, duty cycle < 1% Marking C5075 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-10 2SC5075 IC – VCE IC – VBE 2.0 2.0 VCE = 5 V (A) 120 Collector current IC (A) Collector current IC 1.6 Common emitter Common emitter Ta = 25°C 180 80 1.2 60 40 0.8 20 0.4 IB = 10 mA 1.6 1.2 Ta = 100°C 25 −55 0.8 0.4 0 2 4 6 8 10 Collector-emitter voltage 12 14 DC current gain hFE Common emitter VCE = 5 V Ta = 100°C 30 25 10 −55 5 3 0.01 0.03 0.1 0.3 1 Collector current IC 3 0.4 10 (A) 1 Common emitter IC/IB = 5 Ta = −55°C 0.3 100 25 0.1 0.05 0.03 0.005 0.01 0.03 0.1 0.05 0.03 0.01 0.1 0.3 Collector current IC 1 3 (W) 25 100 0.03 0.1 0.3 1 3 10 150 175 (A) PC – Ta Ta = −55°C 1 0.005 0.01 1.4 1.6 3 0.3 1.2 VBE (V) Collector current IC Common emitter IC/IB = 5 0.5 1.0 0.5 1.4 Collector power dissipation PC Base-emitter saturation voltage VBE (sat) (V) 5 0.8 VCE (sat) – IC 3 VBE (sat) – IC 10 0.6 Base-emitter voltage hFE – IC 50 0.2 VCE (V) 200 100 0 0 16 Collector-emitter saturation voltage VCE (sat) (V) 0 0 1.2 1.0 0.8 0.6 0.4 0.2 0 0 10 (A) 25 50 75 100 125 Ambient temperature Ta (°C) 3 2006-11-10 2SC5075 rth – tw 1000 Curves should be applied in thermal limited area. (single nonrepetitive pulse) 500 Ta = 25°C Transient thermal resistance rth (°C/W) 300 100 50 30 10 5 3 1 0.5 0.3 0.1 0.001 0.01 0.1 1 10 Pulse width 100 1000 tw (s) Safe Operating Area 10 IC max (pulsed)* 3 IC max (continuous) 10 ms* Collector current IC (A) 1 100 ms* 0.3 0.1 1 ms* DC operation Ta = 25°C 0.03 0.01 *: Single nonrepetitive pulse Ta = 25°C 0.003 Curves must be derated linearly with increase in temperature. 0.001 1 0.3 3 10 VCEO max 30 Collector-emitter voltage 100 300 1000 VCE (V) 4 2006-11-10 2SC5075 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-10