RoHS Power Chip Inductors Dimensions: PC03011 Inches (mm) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 1V DCR Max. (Ω) IDC (A) PC03011-1R0M-RC 1.0 20 100 0.08 1.80 PC03011-1R5M-RC 1.5 20 100 0.13 1.44 PC03011-2R2M-RC 2.2 20 100 0.18 1.26 PC03011-3R3M-RC 3.3 20 100 0.27 1.08 PC03011-3R9M-RC 3.9 20 100 0.32 1.00 PC03011-4R7M-RC 4.7 20 100 0.33 0.90 PC03011-5R6M-RC 5.6 20 100 0.48 0.76 PC03011-6R8M-RC 6.8 20 100 0.56 0.68 PC03011-8R2M-RC 8.2 20 100 0.62 0.63 PC03011-100M-RC 10 20 100 0.90 0.56 PC03011-120M-RC 12 20 100 1.00 0.52 PC03011-150M-RC 15 20 100 1.10 0.50 PC03011-180M-RC 18 20 100 1.24 0.46 PC03011-220M-RC 22 20 100 1.40 0.36 PC03011-270M-RC 27 20 100 2.18 0.30 PC03011-330M-RC 33 20 100 2.54 0.28 PC03011-390M-RC 39 20 100 2.80 0.26 PC03011-470M-RC 47 20 100 3.10 0.25 PC03011-500M-RC 50 20 100 3.20 0.24 PC03011-560M-RC 56 20 100 3.50 0.23 PC03011-680M-RC 68 20 100 5.80 0.20 PC03011-750M-RC 75 20 100 6.10 0.18 PC03011-820M-RC 82 20 100 6.60 0.17 Features • Unshielded SMD low cost design • Designed for higher cuurent applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter application • Also available in magnetically shielded Electrical Inductance Range: 1.0µh to 82µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: (L/Q) as specified Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L & Q): HP 4192A / HP4285A (DCR): Chen Hwa 502BC (IDC): HP4284A with HP42841A or CH1061 with CH301A Physical Packaging: 3000 pieces per 13 inch reel. Marking: 2 Character Alpha Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 1/14/09 www.alliedcomponents.com