PCA4979 Converter from 80-pin 0.65mm-pitch QFP (80P6S-A) to 40-pin DIL Standard Pitch Function The PCA4979 is a board that converts an 80-pin 0.65mm-pitch QFP (80P6S-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4979 as a test board to connect an 80P6S-A MCU package to a standard pitch universal board. Since an 80P6S-A IC socket (IC51-0804-711 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA4979, it is easy to replace MCUs. Dimensions 58.0(D)×62.0(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4981A Converter from 80-pin 0.8mm-pitch QFP (80P6-B) to 40-pin DIL Standard Pitch Function The PCA4981A is a board that converts an 80-pin 0.8mm-pitch QFP (80P6-B) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4981A as a test board to connect an 80P6-B MCU package to a standard pitch universal board. Since an 80P6-B IC socket (IC51-819.KS-8075 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA4981 BARE, it is easy to replace MCUs. Dimensions 55.0(D)×60.0(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4981B Converter from 80-pin 0.8mm-pitch LCC (80D0) to 40-pin DIL Standard Pitch (with IC Socket) Function The PCA4981B is a board that converts an 80-pin 0.8mm-pitch LCC (80D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4981B as a test board to connect an 80D0 MCU package to a standard pitch universal board. Since an 80D0 IC socket (IC51-0804-890 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA4981 BARE, it is easy to replace MCUs. Dimensions 55.0(D)×60.0(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4981C Converter from 80-pin 0.8mm-pitch QFP (80P6N-A) to 40-pin DIL Standard Pitch Function The PCA4981C is a board that converts an 80-pin 0.8mm-pitch QFP (80P6N-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4981C as a test board to connect an 80P6N-A MCU package to a standard pitch universal board. Since an 80P6N-A IC socket (IC51-0804-819-6 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA4981 BARE, it is easy to replace MCUs. Dimensions 55.0(D)×60.0(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4981 BARE Converter from 80-pin 0.8mm-pitch QFP (80P6-B or 80P6N-A) or LCC (80D0) to 40-pin DIL Standard Pitch Function The PCA4981 BARE is a board that converts an 80-pin 0.8mm-pitch QFP (80P6-B or 80P6N-A) or LCC (80D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4981 BARE as a test board to connect an 80P6-B, 80P6N-A or 80D0 MCU package to a standard pitch universal board. A cover-fitted IC socket made by Yamaichi Electronics Co., Ltd. is required. Dimensions 55.0(D)×60.0(W)mm (L)=50.8(2.54×20)mm Pin Layout Manufactured Product For 80P6-B: PCA4981A For 80P6N-A: PCA4981C For 80D0: PCA4981B [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4988 Converter from 80-pin 0.8mm-pitch LCC (80D0) to 40-pin DIL Standard Pitch (with LCC Socket) Function The PCA4988 is a board that converts an 80-pin 0.8mm-pitch LCC (80D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA4988 as a test board to connect an 80D0 MCU package to a standard pitch universal board. The PCA4988 has an 80-pin LCC socket mounted on its board. Dimensions 50.0(D)×45.0(W)×6.5(H)mm (L1)=35.56(2.54×14)mm (L2)=38.1(2.54×15)mm (L3)=17.78(2.54×7)mm (L4)=27.94(2.54×11)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA4989 Converter from 80-pin 0.65mm-pitch QFP (80P6S-A) to 40-pin DIL Standard Pitch (Different Pin Layout from the PCA4979) Function The PCA4989 is a board that converts an 80-pin 0.65mm-pitch QFP (80P6S-A) to the standard pitch. Application Use the PCA4989 as a test board to connect an 80P6S-A MCU package to a standard pitch universal board. Since an 80P6S-A IC socket (IC51-0804-711 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA4989, it is easy to replace MCUs. As the pin layout of the PCA4989 is that of the PCA4979 with two displaced pins, pin No. 1 of 80P6S-A IC socket of the PCA4989 corresponds to pin No. 3 of the standard pitch hole. Dimensions 58.0(D)×62.0(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7750G02 Converter board from 80-pin 0.8mm-pitch LCC (80D0) to 40-pin DIL Standard Pitch (with LCC Socket and the Pattern for Oscillator) Function The PCA7750G02 is a converter board that converts an 80-pin 0.8mm-pitch LCC (80D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7750G02 as a test board to connect an 80D0 MCU package to a standard pitch universal board. The PCA7750G02 has an 80-pin LCC socket mounted on the PCA7750G02-BARE. Dimensions 70.0(D)×64.0(W)×8.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7750G02-BARE Converter board from 80-pin 0.8mm-pitch QFP ( 80P6N-A) or LCC (80D0) to 40-pin DIL Standard Pitch Function The PCA7750G02-BARE is a converter board that converts an 80-pin 0.8mm-pitch QFP (80P6N-A) or LCC (80D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7750G02-BARE as a test board to connect an 80P6N-A or 80D0 MCU package to a standard pitch universal board. Since the PCA7750G02-BARE has a flat mounting pattern, users can mount a PROM MCU directly on it. An 80-pin LCC socket made by Yamaichi Electronics Co., Ltd. is required, when an MCU package is 80D0. Dimensions 70.0(D)×64.0(W)mm (L)=50.8(2.54×20)mm Foot Pattern Reference Dimensions Pin Layout Manufactured Product For 80D0: PCA7750G02 [Ordering Information] See Appendix H "Ordering Information". * When using the AXS4803M19 made by Matsushita Electric Works, Ltd., note that the contacts of the IC socket proper touch the PC board in the shaded section. Therefore, be especially careful with pattern wiring to ensure that other pins will not be shorted. (Through holes are not accepted.) * Only when using the AXS4803M19 made by Matsushita Electric Works, Ltd., be sure to create foot patterns for the holding metal fixtures in four locations. *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7752AG02 Converter board from 100-pin 0.65mm-pitch LCC (100D0) to 50-pin DIL Standard Pitch (with LCC Socket) Function The PCA7752AG02 is a converter board that converts a 100-pin 0.65mm-pitch LCC (100D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7752A as a test board to connect a 100D0 MCU package to a standard pitch universal board. The PCA7752A has a 100-pin LCC socket mounted on the PCA7752AG02-BARE. Dimensions 70.0(D)×64.0(W)×8.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7752AG02-BARE Converter board from 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) to 50-pin DIL Standard Pitch Function The PCA7752AG02-BARE is a converter board that converts a 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7752AG02-BARE as a test board to connect a 100P6S-A or 100D0 MCU package to a standard pitch universal board. Since the PCA7752A-BARE has a flat mounting pattern, users can mount a PROM MCU directly on it. A 100-pin LCC socket made by Yamaichi Electronics Co., Ltd. is required, when an MCU package is 100D0. Dimensions 70.0(D)×64.0(W)mm (L)=50.8(2.54×20)mm Foot Pattern Reference Dimensions Pin Layout Manufactured Product For 100P6S-A: PCA7752B For 100D0: PCA7752AG02 [Ordering Information] See Appendix H "Ordering Information". * When using the AXS4003M295C made by Matsushita Electric Works, Ltd., note that the contacts of the IC socket proper touch the PC board in the shaded section. Therefore, be especially careful with pattern wiring to ensure that other pins will not be shorted. (Through holes are not accepted.) * Only when using the AXS4003M295C made by Matsushita Electric Works, Ltd. and IC61-1004-051 made by Yamaichi Electronics Co., Ltd., be sure to create foot patterns for the holding metal fixtures in four locations. *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7752B Converter from 100-pin 0.65mm-pitch QFP (100P6S-A) to 50-pin DIL Standard Pitch Function The PCA7752B is a board that converts a 100-pin 0.65mm-pitch QFP (100P6S-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7752B as a test board to connect a 100P6S-A MCU package to a standard pitch universal board. Since a 100P6S-A IC socket (IC51-1004-814-6 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA7752B, it is easy to replace MCUs. Dimensions 70.0(D)×64.0(W)×21.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7754 Converter from 100-pin 0.5mm-pitch QFP (100P6Q-A) to 50-pin DIL Standard Pitch Function The PCA7754 is a board that converts a 100-pin 0.5mm-pitch QFP (100P6Q-A to formerly 100P6D-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7754 as a test board to connect a 100P6Q-A MCU package to a standard pitch universal board. The PCA7754 has a 100P6Q-A IC socket (IC51-1004-809 made by Yamaichi Electronics Co., Ltd.) mounted on its board. Dimensions 70.0(D)×63.34(W)×17.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7755A Converter from 64-pin 0.8mm-pitch QFP (64P6N-A) to 32-pin DIL Standard Pitch Function The PCA7755A is a board that converts a 64-pin 0.8mm-pitch QFP (64P6N-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7755A as a test board to connect a 64P6N-A MCU package to a standard pitch universal board. Since a 64P6N-A IC socket (IC51-824.KS-8095 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA7755A, it is easy to replace MCUs. Dimensions 70.0(D)×63.34(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7755B Converter from 64-pin 0.8mm-pitch LCC (64D0) to 32-pin DIL Standard Pitch Function The PCA7755B is a board that converts a 64-pin 0.8mm-pitch LCC (64D0) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7755B as a test board to connect a 64D0 MCU package to a standard pitch universal board. Since a 64D0 IC socket (IC51-0644-1329 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA7755B, it is easy to replace MCUs. Dimensions 70.0(D)×63.34(W)×20.0(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. PCA7756 Converter from 80-pin 0.5mm-pitch QFP (80P6Q-A) to 40-pin DIL Standard Pitch Function The PCA7756 is a board that converts an 80-pin 0.5mm-pitch QFP (80P6Q-A to formerly 80P6D-A) to the standard pitch. Pin No. 1 corresponds to pin No. 1. Application Use the PCA7756 as a test board to connect an 80P6Q-A MCU package to a standard pitch universal board. Since an 80P6Q-A IC socket (IC51-0804-808 made by Yamaichi Electronics Co., Ltd.) is mounted on the PCA7756, it is easy to replace MCUs. Dimensions 770.0(D)×63.34(W)×20.2(H)mm (L)=50.8(2.54×20)mm Pin Layout * Pins and other parts needed to connect the standard pitch converter are not included with the product. [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies.