M3T-DIRECT80S Direct Dummy IC for 80-pin 0.65mm-pitch SSOP Dimensions Function This accessory tool connects an emulation pod and the target. It can be mounted on the same foot pattern as the MCU housed in the 80-pin 0.65mm-pitch QFP (80P6S-A) package. Attaching Procedure Mount this dummy IC on the foot pattern on the target. Then connect the emulation pod to the connector provided at the top of this dummy IC. ① denotes pin numbers on the M3T-DIRECT80S. 1 denotes pin numbers of the top of a connector. * : Position of No. 1 pin Symbol Term Dimensions [mm] A Fitting height 4.9 D Package length 16.8 E Package width 16.8 e Interval in row of pins 0.65 M Mount pad size 6.3 [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies.