RoHS PCLP10 Power Chip Low Profile Inductors Dimensions: Inches (mm) 0.079 MAX. (2.01) 0.049 MAX. (1.24) 0.079 0.209 (2.01) (5.31) MAX. MAX. 0.100 (2.54) 0.256 MAX. (6.50) Allied Part Number Inductance (µh) Tolerance (%) DCR Max. (Ω) Isat (A) Irms (A) 0.070 (1.78) 0.130 (3.30) Features • Designed for applications requiring high inductance, high current and an ultra PCLP10-1R0M-RC 1.0 20 .05 2.5 2.3 PCLP10-1R5M-RC 1.5 20 .06 2.2 2.1 PCLP10-2R2M-RC 2.2 20 .07 1.8 1.7 PCLP10-3R3M-RC 3.3 20 .12 1.4 1.3 PCLP10-4R7M-RC 4.7 20 .15 1.2 1.1 PCLP10-6R8M-RC 6.8 20 .20 1.1 1.0 PCLP10-100M-RC 10 20 .30 1.0 .90 PCLP10-150M-RC 15 20 .40 0.8 .70 PCLP10-220M-RC 22 20 .54 0.6 .50 Tolerance: ± 20% over the entire PCLP10-330M-RC 33 20 .74 0.5 .45 inductance range. PCLP10-470M-RC 47 20 1.1 .45 .40 PCLP10-680M-RC 68 20 1.6 .35 .35 Operating Temp. Range: i-40° to +85°C.ll PCLP10-101M-RC 100 20 2.3 .30 .30 Inductance Drop: 10% typically at the PCLP10-151M-RC 150 20 3.5 .25 .25 PCLP10-221M-RC 220 20 5.7 .20 .18 PCLP10-331M-RC 330 20 8.2 .16 .16 PCLP10-471M-RC 470 20 10.8 .14 .12 PCLP10-681M-RC 680 20 17.2 .12 .10 PCLP10-102M-RC 1000 20 22.6 .08 .08 low profile • Maximum height of .079 inches with current ratings up to 2.5 amps • Wide inductance range from 1µh to 1000µh • Flat top for pick and place assembly Electrical Inductance Range: 1.0µh to 1000µh. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push rated Isat.0 to 2000) x 10 -6°C. Temperature Rise: ∆T=40ºC rise typical at Irms. Physical Packaging: 3500 pieces per 13 inch reel. Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL www.alliedcomponents.com