PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade FEATURES • High power rating (3 W at 70 °C) • Low temperature coefficient (150 ppm/°C typical) RoHS • Full sealing COMPLIANT • Use of faston 2.86 connections • Tests according to CECC 41 000 • Wires and connectors available • Custom design on request DIMENSIONS in millimeters (inches) ± 0.5 (± 0.02) PE30L 8 (0.31) 20 (0.79) max. 12 (0.47) 76° 14 Wrench 13 (0.51) max. Thread M10 x 0.75 Ø6 (0.24) 0.5 (0.02) FG = 16 (0.63) Ø 19.7 (0.78) a FL = 25 (0.99) PE30LL: LPRP - Locating Peg FR = 50 (1.97) 3 (0.12) c R 5.2 (0.20) 3 (0.12) b 2.85 (0.11) 0.8 (0.3) Ø 1.8 (0.07) Ø 10.5 (0.41) 12.5 (0.49) 9.2 (0.36) PANEL MOUNT 8.8 (0.35) Ø 3.5 (0.14) 3 (0.12) PE30ME: Panel Sealed 2.3 (0.9) 23 (0.91) max. 16 (0.63) max. Sealing Ring 0.7 (0.03) Ø 1.2 (0.05) Ø 1 (0.4) Flats located 8 ± 0.2 (0.31 ± 0.01) Ø 10.5 (0.41) Document Number: 51037 Revision: 04-Sep-08 Ø6 (0.24) Ø 19.7 (0.78) 9 (0.35) FD = 13 (0.61) PANEL MOUNT Slot 1 x 1.8 Deep FJ = 22 (0.87) FP = 47 (1.85) For technical questions, contact: [email protected] See also: Application notes www.vishay.com 131 PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 270° ± 10 ° 22 Ω to 10 MΩ Linear Law Resistance Range 100 Ω to 2.2 MΩ Logarithmic Laws Standard Series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 Standard ± 20 % Tolerance On Request ± 10 % to ± 5 % Linear A CIRCUIT DIAGRAM Varation Law c a (3) (1) b (2) cw % TOTAL RESISTANCE 100 80 F 60 A L 40 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION 3 POWER IN W LIN. LAW A Linear 3 W at 70 °C Power Rating Logarithmic 1.5 W at 70 °C 2 LOG. LAW L and F 1 0 0 20 40 60 70 80 100 120 140 AMBIENT TEMPERATURE IN °C Temperature Coefficient (Typical) ± 150 ppm/°C Limiting Element Voltage Contact Resistance Variation 300 V 3 % Rn or 3 Ω End Resistance (Typical) 1Ω Dielectric Strength (RMS) 2500 V Insulation Resistance (300 VDC) 105 MΩ Independent Linearity (Typical) ±5% www.vishay.com 132 For technical questions, contact: [email protected] Document Number: 51037 Revision: 04-Sep-08 PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. POWER AT 70 °C MAX. WORKING VOLTAGE LOGS LAW MAX. CUR. THROUGH WIPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER TYPICAL TCR - 55 °C + 125 °C W V mA ppm/°C 1.5 1.5 1.5 1.5 1.5 1.5 0.9 0.41 0.19 0.09 38.7 57.4 83.9 122 181.6 265 300 300 300 300 38.7 26.1 17.9 12.2 8.25 5.64 3 1.36 0.63 0.30 Ω W V mA 22 47 100 220 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 2.2M 4.7M 10M 3 3 3 3 3 3 3 3 3 3 1.91 0.90 0.41 0.19 0.09 0.04 0.02 0.01 8.12 11.87 17.32 25.69 37.55 57.44 81.24 118.74 173.20 256.9 300 300 300 300 300 300 300 300 369 252 173 116 79 54 37 25 17 11 6.3 3 1.36 0.63 0.30 0.13 0.06 0.03 ± 150 MECHANICAL SPECIFICATIONS Mechanical Travel 300° ± 5° Operating Torque (Typical) 3 Ncm max. 4.25 oz.-inch max. End Stop Torque 120 Ncm max. 10.51 lb oz.-inch max. Tightening Torque of Mounting Nut 250 Ncm max. 22 lb-inch max. Unit Weight 23 to 32 g max. 0.8 to 1.13 oz. Terminals e3: pure Sn ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to 125 °C 55/125/56 Fully sealed - Container IP67 OPTIONS Special Feature Command Shaft Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in accordance to drawings supplied by customers. We recommend that customers should not machine tool shafts, in order to avoid damage. Bending or torsion of terminals should also be avoided. Panel Sealing (PE30M) The panel sealing device consists of a ring located in a groove on the potentiometer face. Sealing is obtained by tightening the ring against the panel when mounting the potentiometer. Old code: PE30P Document Number: 51037 Revision: 04-Sep-08 For technical questions, contact: [email protected] www.vishay.com 133 PE30 Vishay Sfernice Fully Sealed Container Cermet Potentiometer Military and Professional Grade OPTIONS Location is obtained by fitting a special washer on the mounting face of the potentiometer. Old code: LPRP Locating Peg (PE30LL) The shaft locking device consists of a tapered nut tightening a slotted notched washer against both bushing and shaft. DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm. DBAN is also available with all special types. This device is normally supplied in a separate bag. Can be pre-mounted on request. Shaft Locking (PE30LD) 1) 14 wrench 12 wrench 2) Assembling Method 6.5 15 MARKING • VISHAY trademark • Model • Ohmic Value (in Ω, kΩ or MΩ) • Tolerance (in %) • Manufacturing date code • Marking of terminals 3, and a, b, c PERFORMANCE CECC 41 301 - 002 TESTS Climatic Sequence Long Term Damp Heat Rotational Life Load Life Rapid Temperature Change Shock Vibration www.vishay.com 134 CONDITIONS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles TYPICAL VALUES AND DRIFTS ΔRT ΔR1-2 (%) REQUIREMENTS (%) RT R1-2 ± 10 % ± 10 % ΔRT (%) RT ± 0.5 % ΔR1-2 (%) R1-2 ±1% ± 10 % Insulation resistance: > 100 MΩ ± 10 % Contact res. variation: < 7 % Rn ± 10 % Contact res. variation: < 7 % Rn ± 0.5 % ±1% Insulation resistance: > 104 MΩ ±3% Contact res. variation: < 2 % Rn ±1% Contact res. variation: < 3 % Rn 5 cycles - 55 °C at + 125 °C ±3% ± 0.5 % 50 g at 11 ms 3 successive shocks in 3 directions ±2% ± 0.1 % ± 0.2 % 10 to 55 Hz 0.75 mm or 10 g during 6 hours ±2% ± 0.1 % ± 0.2 % 56 days 40 °C 93 % HR 25 000 cycles 1000 h at rated power 90’/30’ - ambient temp. 70 °C For technical questions, contact: [email protected] Document Number: 51037 Revision: 04-Sep-08 Fully Sealed Container Cermet Potentiometer Military and Professional Grade PE30 Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P E MODEL BUSHING 3 0 L B OPTION F G 2 0 OHMIC VALUE SHAFT A law = For L Bushing (= old codes:) from 22 Ω FG 16 mm, slotted = AC to 10 MΩ FL 25 mm, slotted = AM For L Bushing FR 50 mm, plain = AL D = DBAN M = Panel L and F L = LPRP sealed laws = For M Bushing B = DBAN M10 x 0.75 FD = 13 mm, slotted = AC from 100 Ω and LPRP to 2.2 MΩ FJ = 22 mm, slotted = AM A = Peg FP = 47 mm, plain = AL and DBAN L= M10 x 0.75 0 = none 4 M A B TOLERANCE LAW PACKAGING ± 20 % on request ± 10 % ±5% A = Linear L = Clockwise logarithmic F = Clockwise inverse logarithmic B = Box of 10 pieces SPECIAL NUMBER (if applicable) Given by VISHAY for custom design For M Bushing E = Peg PART NUMBER DESCRIPTION (for information only) PE30 LPRP AC 200K 20 % A DBAN BO10 MODEL FEATURES OPTION SHAFT VALUE TOLERANCE TAPER OPTION SPECIAL PACKAGING Document Number: 51037 Revision: 04-Sep-08 For technical questions, contact: [email protected] e4 CUSTOM LEAD SPECIAL SHAFT (Pb)-FREE www.vishay.com 135 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1