SMT POWER INDUCTORS Unshielded Drum Core - PF0698NL Series All Inductors are RoHS compliant Footprint: 13.0mm x 9.4mm Max Current Rating: up to 4.9A Inductance Range: 10µH to 1000µH Clip pin termination 260°C reflow peak temperature qualified Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C Inductance @0Adc (μH ±20%) 10 15 18 22 33 47 68 100 150 220 330 470 680 1000 Part 4 Number PF0698.103NL PF0698.153NL PF0698.183NL PF0698.223NL PF0698.333NL PF0698.473NL PF0698.683NL PF0698.104NL PF0698.154NL PF0698.224NL PF0698.334NL PF0698.474NL PF0698.684NL PF0698.105NL Irated 1 (A) DCR (mΩ MAX) 4.90 4.50 4.20 3.50 2.80 2.45 2.00 1.60 1.32 1.13 0.95 0.75 0.60 0.49 24 29 30 47 65 85 130 200 280 360 580 860 1200 2000 Saturation 2 Current Isat (A) 8.3 7.1 5.8 5.6 4.3 3.8 3.1 2.6 2.1 1.7 1.35 1.15 1.05 0.85 1 PF0698 XXXNL Date Code 1 .510 12,95 MAX .300 7,62 TYP .290 7,37 REF .005/0,13 SUGGESTED PAD LAYOUT .447 11,35 .945 ± .012 24,00 ± 0,30 .020 0,50 TAPE & REEL LAYOUT Weight ....................2.5 grams Tape & Reel...............280/reel Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .004 0,10 .453 11,51 .516 13,10 2 .115 2,92 REF 2 .370 9,40 MAX 19 15 13 12 9 7 6 4.8 3.5 2.8 2.3 1.7 1.5 1.2 .110 2,79 REF .100 2,54 TYP .335 8,50 TYP SRF (MHz TYP) Schematic Mechanical .445 11,30 MAX Heating 3 Current I D C (A) 4.90 4.50 4.20 3.50 2.80 2.45 2.00 1.60 1.32 1.13 0.95 0.75 0.60 0.49 .380 9,65 .630 16,00 USER DIRECTION OF FEED USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 5538070 • Taiwan 886 2 26980228 www.pulseeng.com P641.A (8/05) SMT POWER INDUCTORS Unshielded Drum Core - PF0698NL Series Notes from Tables 1. The rated current as listed is either the saturation current @ 25°C or the heating current depending on which value is lower. 2. The saturation current Isat is the current which causes the inductance to drop by 10% typical at an ambient temperature of 25°C. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current Idc is the dc current which causes the temperature rise of the part to increase by approximately 40°C. This current is determined by mounting the component on a typical application PCB and applying the current to the device for 30 minutes. 4. Optional Tape and Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PF0698.103NL becomes PF0698.103NLT). Pulse complies to industry standard tape and reel specification EIA481. Percentage of the initial inductance Typical Inductance vs Current Characteristics 110% 100% 90% 80% 70% 60% 50% 40% 0,0 0,2 0,4 0,6 0,8 1,0 1,2 Normalized Isat For More Information: Pulse Worldwide Headquarters Pulse Northern Europe Pulse Southern Europe Pulse Pulse North China China Headquarters Room 1002 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870 No. 819 Nanjing West Rd Shanghai China TEL: 86 21 32181071 FAX: 86 21 32181396 Pulse South Asia Pulse North Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 3F-4, No. 81, Sec. 1 Hsin Tai Wu Road Hsi-Chih Taipei Hsien Taiwan TEL: 886 2 26980228 FAX: 886 2 26980948 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2005. Pulse Engineering, Inc. All right reserved. www.pulseeng.com P641.A (8/05)