High Temperature TaNFilm® Chip Resistors IRC Advanced Film Division PFC HT Series Ultra stable Tantalum Nitride resistor film system • Available in industry standard 0603, 0805 and 1206 chip sizes • Gold and 100% tin (Pb-free) terminations available • Self-passivating TaNFilm® element • Absolute TCR to ±25ppm/°C Non-leaching Nickel barrier Wrap around termination Electrical Data Model Ohmic Range Absolute TCR 10Ω to 10KΩ ±100ppm/°C 25Ω to 10KΩ ±50ppm/°C 50Ω to 10KΩ ±25ppm/°C 10Ω to 20KΩ ±100ppm/°C 25Ω to 20KΩ ±50ppm/°C 50Ω to 20KΩ ±25ppm/°C 5Ω to 85KΩ ±100ppm/°C 25Ω to 85KΩ ±50ppm/°C 50Ω to 85KΩ ±25ppm/°C W0603HT W0805HT W1206HT Rated Power Rated Voltage (not to exceed rated power) 0.0625W 33.3V 0.100W 50V 0.125W 100V Temperature Range Termination Substrate -55°C to 200°C Gold and 100% tin (Pb-free) 99.5% Alumina Physical Data L a TOP SIDE BOTTOM W H b L W H a b W0603 0.063”±0.004” 0.031” ±0.004” 0.020” ±0.004” 0.012”±0.005” 0.015”±0.005” W0805 0.081”±0.005” 0.050”±0.020” 0.020”±0.004” 0.016”±0.005” 0.016”±0.008” W1206 0.126”±0.006” 0.063”±0.005” 0.024”±0.004” 0.025”±0.010” 0.025”±0.010” General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com A subsidiary of TT electronics plc PFC Hi Temp Series Issue May 2005 High Temperature TaNFilm® Chip Resistors IRC Advanced Film Division Rated Power vs Temperature Data Performance Data Performance Typical Maximum Thermal Shock ±0.02% ±0.10% Short Time Overload ±0.02% ±0.05% High Temperature Exposure ±0.03% ±0.10% Effects of Solder ±0.01% ±0.10% Moisture Resistance ±0.03% ±0.10% ±0.8% ±1.0% ±0.2% ±0.5% 100 % Rated Power Environmental Test MIL-PRF-55342 50 50 Life (1000 hours, 200°C, no load ) Life (1000 hours, 150°C, rated power ) 100 150 200 Temperature in °C Ordering Data Prefix PFC - W1206 HT - 01 - 1001 - F Chip Size W1206; W0805; W0603 Termination HT = High temperature chip resistor with gold plated terminations HTLF = High temperature chip resistor with 100% tin (Pb-free) terminations TCR Code 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C Resistance Code 4-Digit resistance code. Ex: 1002 = 10KΩ; 50R0 = 50Ω Tolerance Code J = ±5%; G = ±2%; F = ±1% © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com PFC Hi Temp Series Issue May 2005