Gold Terminations Precision Thin Film Chip Resistors Ultra stable Tantalum Nitride resistor film system PFC Gold Series • Wire, ribbon, or epoxy bondable gold plated terminations • Available in 0402, 0603, 0805, 1206, 1505, 2010 and 2512 chip sizes • Tested for COTS applications • Absolute TCR to ±10ppm/°C • Mil screening available Wrap around termination IRC now delivers the same high performance TaNFilm® chip resistors with wire, ribbon, and epoxy bondable gold plated terminations. Available in industry standard chip sizes ranging from 0402 to 2512, the PFC-Gold series provide the performance and precision necessary in a bonded circuit environment. Using the same manufacturing line as the PFC Military Series, IRC’s PFC-Gold chip resistors maintain the same superior environmental performance. Specially selected materials and processes insure initial precision is maintained in the harshest operating environment. For your bondable, precision chip resistor needs, specify IRC’s PFC-Gold series resistors. Electrical Data Model Power Rating (70°C) Max Voltage Rating (≤ √ P x R) W0402 50mW 75V W0603 100mW 75V W0805 250mW 100V W1206 333mW 200V W1505 350mW 100V W2010 800mW 175V W2512 1.0W 200V Temperature Range ESD Sensitivity Noise Termination Substrate -65°C to +150°C 2KV to 4KV (HBM) <-25dB 20KÅ minimum plated gold 99.5% Alumina Environmental Data Environmental Test MIL-PRF-55342 Maximum ∆R per Characteristic E Performance Typical Maximum Thermal Shock ±0.10% ±0.02% ±0.10% Low Temperature Operation ±0.10% ±0.01% ±0.05% Short Time Overload ±0.10% ±0.01% ±0.05% High Temperature Exposure ±0.10% ±0.03% ±0.10% Effects of Solder ±0.20% ±0.01% ±0.10% Moisture Resistance ±0.20% ±0.03% ±0.10% Life ±0.50% ±0.03% ±0.10% General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc PFC-Gold Series Issue January 2009 Sheet 1 of 4 Gold Terminations Precision Thin Film Chip Resistors Power Derating Curve % Of Rated Power 100 50 10 25 70 150 Temperature (˚C) Manufacturing Capabilities Data (Commercial Product Only) Absolute Tolerance ±5%, ±2%, ±1%, ±0.5%, ±0.1% W0402 50Ω 30K ±25, ±50 and ±100ppm/°C Resistance Range Absolute TCR ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05%, ±0.02% ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05% Absolute Tolerance ±5%, ±2%, ±1%, ±0.5%, ±0.1% W0603 W0805 W1206 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 100Ω 100Ω 100Ω 200Ω 200Ω 200Ω 50KΩ 100KΩ 400KΩ 75KΩ 180KΩ 650KΩ 100KΩ 267KΩ 1.0MΩ ±50 or ±100 ppm/°C Resistance Range Absolute TCR ±25 ppm/°C ±15 ppm/°C ±10 ppm/°C ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05%, ±0.02% ±5%, ±2%, ±1%, ±0.5%, ±0.1% Absolute Tolerance ±5%, ±2%, ±1%, ±0.5% W1505 W2010 W2512 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 400KΩ 400KΩ 400KΩ ±50 or ±100 ppm/°C ±25 ppm/°C © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 650KΩ 650KΩ 650KΩ 1.0MΩ 1.0MΩ 1.0MΩ Resistance Range Absolute TCR PFC-Gold Series Issue January 2009 Sheet 2 of 4 Gold Terminations Precision Thin Film Chip Resistors Manufacturing Capabilities Data (MIL Screened Only) Absolute Tolerance ±5%, ±2%, ±1%, ±0.5%, ±0.1% W0402 50Ω 30K ±25, ±50 and ±100ppm/°C Resistance Range Absolute TCR ±5%, ±2%, ±1%, ±0.5% , ±0.1%, ±0.05%, ±0.02% ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05% Absolute Tolerance ±5%, ±2%, ±1%, ±0.5%, ±0.1% W0603 W0805 W1206 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 50KΩ 100KΩ 125KΩ 100Ω 100Ω 100Ω 59KΩ 125KΩ N/A Resistance Range ±50 or ±100 ppm/°C Absolute TCR ±25 ppm/°C ±15 ppm/°C ±10 ppm/°C ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05%, ±0.02% ±5%, ±2%, ±1%, ±0.5%, ±0.1% Absolute Tolerance ±5%, ±2%, ±1%, ±0.5% W1505 W2010 W2512 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 125KΩ 400KΩ 400KΩ ±50 or ±100 ppm/°C ±25 ppm/°C © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Resistance Range Absolute TCR PFC-Gold Series Issue January 2009 Sheet 3 of 4 Gold Terminations Precision Thin Film Chip Resistors Physical Data L a TOP W SIDE BOTTOM H b L W H a b W0402 0.040˝ ±0.002 0.021˝ ±0.002 0.012˝ ±0.003 0.008˝ ±0.002 0.010˝ ±0.002 W0603 0.063˝ ±0.004 0.031˝ ±0.004 0.020˝ ±0.004 0.012˝ ±0.005 0.015˝ ±0.005 W0805 0.081˝ ±0.005 0.050˝ ±0.005 0.020˝ ±0.006 0.015˝ ±0.008 0.016˝ ±0.008 W1206 0.126˝ ±0.006 0.063˝ ±0.005 0.024˝ ±0.004 0.025˝ ±0.010 0.025˝ ±0.010 W1505 0.155˝ ±0.007 0.050˝ ±0.005 0.024˝ ±0.004 0.020˝ ±0.010 0.020˝ ±0.010 W2010 0.203˝ ±0.007 0.103˝ ±0.005 0.024˝ ±0.004 0.020˝ ±0.008 0.020˝ ±0.008 W2512 0.255˝ ±0.007 0.124˝ ±0.005 0.024˝ ±0.004 0.020˝ ±0.008 0.020˝ ±0.008 Mil Screened Precision Chip Resistors IRC’s PFC chip resistors are available with Mil screening. These chips are manufactured on the same production line as our Milqualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with Mil marking. Commercial Ordering Data Mil Screened Ordering Data* Prefix Prefix PFC - W1206 RJ - 01 - 1001 - B PFC - W1206 Model Model Termination Termination TCR Code Mil-Screened TCR Code W0402; W0603; W0805; W1206; W1505; W2010; W2512 RJ = Gold plated 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C; 12 = ±10ppm/°C Resistance Code 4-Digit resistance code. Ex: 10R0 = 10Ω; 1000 = 100Ω; 1001 = 1000Ω; 1002 = 10KΩ Tolerance Code J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; B = ±0.1%; A = ±0.05%; Q = ±0.02% RJ - 04 - 1001 - B W0402; W0603; W0805; W1206; W1505; W2010; W2512 RJ = Gold plated 04 = ±300ppm/°C; 05 = ±100ppm/°C; 06 = ±50ppm/°C; 07 = ±25ppm/°C; 14 = ±20ppm/°C; 15 = ±15ppm/°C; 16 = ±10ppm/°C Resistance Code 4-Digit resistance code. Ex: 10R0 = 10Ω; 1000 = 100Ω; 1001 = 1000Ω; 1002 = 10KΩ Tolerance Code J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; B = ±0.1%; A = ±0.05%; Q = ±0.02% For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. *Please refer to our PFC Military datasheet to order parts qualified to MIL-PRF-55342. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com PFC-Gold Series Issue January 2009 Sheet 4 of 4