Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 4305180175 Item: UMS05-1A80-75D Preliminary Datasheet Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 80 Contact-rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Connection pins Magnetic Shield Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value & % ' Start Value $ % !"! % ( ! & RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz above open switch ) *+ Conditions Min RH <45%, 200 VDC measuring voltage according to IEC 255-5 Conditions Typ Max mineral-filled epoxy C194 tinned Internal Magnetic Shield Min Typ Max 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz 0 0 / wave sodering max. 5 sec. fully sealed Unit ) , Unit . . . Modifications in the sense of technical progress are reserved Designed at: 01.11.10 Designed by: MAPODACA Approval at: Last Change at: 08.10.11 Last Change by: KYANG Approval at: 17.03.11 Approval by: Approval by: TLANE Rev. No.: 07