PI-003 PARALLEL DATA TO CVBS 10 BIT INPUT Parallel multiplexed component signals to CCIR Rec 656 SMPTE RP-125 coded. Note. To ease interfacing into equipment data is latched by the rising edge of the clock. Data rate Data Set up time Data hold time Line standard 27 MHz 3 ns min to positive edge of clock 2.5 ns min from positive edge of clock 625/50 or 525/60 Auto detection Analogue Output Characteristics Output signal No of Outputs: Output Impedance Output return loss Resolution Freq. Response K-ratings PAL-I, NTSC-M, according to line input standard - auto sensing 2 75 Ohms ±1% > 40 dB to 5.5 MHz 10 bit < 0.15 dB to 5.5 MHz (with eq set to minimum and gain at 0 dB) < 0.3 dB to 5.75 MHz Chroma filtering as specified by CCIR624-3. Equal I/Q filtering for NTSC kp, kpb, kbar < 0.5% Chroma/luma gain inequality Chroma/luma delay inequality Differential phase Differential gain Noise < 0.1 dB < 10 ns < 1.0 degree < 0.5% > 70 dB rms to 5.5 MHz Power + 5V ±0.25V (550mA max) Operating Temp 0°C to 40°C Note: This item is NOT aqueous washable. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara109d.doc Page 1 of 3 Feb-01(F) Mechanical Details The following formats are available: Format A DR00212A STD configuration with low profile pins and BNC connectors for outputs. Format B DR00213A LOW profile pins and MCX connectors for outputs. Format C DR00214A STAND-OFF configuration with BNC outputs. Format D DR00245B LOW profile i/p pins and 0.65mm2 o/p pins. Connector Pinout 1 2 3 +5V CLK D0 13 14 15 +5V +5V A0 25 26 27 I/O 2 I/O 3 I/O 4 37 38 39 -5V -5V -5V ---- option 000 only ---- 4 D1 16 A1 28 NC 40 NC D0 to D9 CLK SCL, SDA * ID0,ID1,ID2 I/O 0 – 4 5 D2 17 SDA 29 NC 41 NC 6 D3 18 SCL 30 NC 42 NC 7 D4 19 RESET 31 NC 43 NC 8 D5 20 I/O 1 32 NC 44 NC 9 D6 21 I/O 0 33 NC 45 NC 10 D7 22 GND 34 NC 46 ID0 11 D8 23 GND 35 * 47 ID1 12 D9 24 GND 36 * 48 ID2 Parallel Data Bus D0 LSB , D9 MSB Parallel Data clock I2C data and clock lines Not connected on this card but is connected on other cards within the range. Card type identification code. Facilities for code applications/functionality control. Details TBA. Card Type Identification code. CARD TYPE PI-003 ID2 0V ID1 +5v ID0 +5v Ordering codes PI-003 A YYY X Product type Special variations Mechanical Package A,B,C,D Requested Options 000 = Dual rail +5V 001 = Single rail supply. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara109d.doc Page 2 of 3 Feb-01(F) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara109d.doc Tel: Fax: Email: Web site: Page 3 of 3 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Feb-01(F)