ETC PL15N001FCG-R-0-01

PD
LD
PL13/15 DFB Series Laser Diode Modules
Inc
PD-LD Inc. offers a variety of
packaging options for its DFB Series of
laser diodes. These units are available
i n r e a d y -t o - u s e, f i b e r - c o u p l e d
packages, including FC, ST, and SC
receptacles, as well as fiber- pigtailed
units.
The InGaAsP
laser diodes
offered by PD-LD are of proven design
and manufacture; t h e standard
wavelengths are centered at 1310 and
1 5 5 0 n m . F i b e r -c o u p l e d CW
(continuous-wavelength) output powers
range from 0.1 - 2 mW, depending on
the fiber type and desired performance
level. Tracking error over OTR -40 to
+85C is 1.0 dB maximum .
Optional board or panel mount
flanges are available for pigtailed
devices; contact PD-LD Sales. Also,
PD-LD Inc. will package non-standard
lasers or parts specified by a customer
using standard or custom receptacle or
pigtailing techniques. Both receptacle
and pigtail packages are made using an
active micro-positioning system and
laser welding process ensuring a
reliable and well constructed product.
PD-LD offers two popular pin-outs
for DFB lasers to address various
existing PCB layouts.
Features
• Internal Monitor Photodetector
• Compact, reliable receptacle & coax fiber-coupled package
• 0.1 - 2.0 mW singlemode (9/125)
• 30dB minimum side mode suppression
• 0.2nsec typical rise/fall time
Performance Specifications
PD-LD
Part No.1
Wavelength (nm)
Min. Typ. Max.
Min. Fiber
Coupled Power
(mW)
Pin-out
Threshold
Operating
Current (mA) Current (mA)
Typ. Max. Typ.
Max.
Monitor PD
Current (mA)
Min. Typ.
Continuous Wavelength InGaAsP Lasers @ 25C
PL13U001100B -R-0-01
1290 1310 1330
1 mW
into 9/125 SMF
“H”
PL13U0.5FC11-S -0
1290 1310 1330
0.5mW
FC Receptacle
“H”
PL13N0021FAA-0-0-01
1295 1310 1325
2 mW
into 9/125 SMF
“T”
PL15M0011SCA -0-0-01
1530 1550 1570
1 mW
into 9/125 SMF
“H”
PL15M0.51SCC-R-0-01
1530
1550 1570
0.5 mW
into 9/125 SMF
“H”
PL15N001FCG-R-0-01
1530
1550 1570
1 mW
into 9/125 SMF
“T”
PL15N002FC0-0-0-01
1530
1550 1570
2 mW
into 9/125 SMF
“T”
1Examples only; most device/packaging combinations available. See
1Examples only; most device/packaging combinations available.
6
20
18
40
InGaAs
0.1
0.8
6
20
18
40
InGaAs
0.1
0.8
10
15
20
35
InGaAs
0.1
0.8
10
30
30
60
InGaAs
0.1
0.8
15
30
30
45
InGaAs
0.1
0.8
10
15
20
30
InGaAs
0.1
0.8
10
15
20
30
InGaAs
0.1
0.8
part
numbers
on reverse; cmay
ontact
Changes
to specifications
be Sales
made Dept.
without notice.
96-02FOLD1.Rev. A
98-02FOLDa.Rev
03-02PL13/15DFB.
Rev.2C
30-B Pennington-Hopewell Rd., Pennington NJ 08543
PLD L13/15DFB- Series
Laser Diodes for Fiber Optics
Physical Dimensions (mm) & Pin Connection
(4)
“H”
(3)
Case
PD
LD
Coaxial-Pigtailed Laser
Diode Package
Consult PD -LD for Available Board Mount
(10181 or 10198) or Panel Mount Brackets
(10219) or refer to LDs w/ PM Fiber Pigtail
(2)
(1)
13A,13U,15A,15M Lasers
(2)
(3) Case
PD
“T”
LD
(4)
(1)
ST Receptacle LD Package
13N, 15N Laser
Ordering Information
Lasers - Pigtailed & Receptacle
PLWWWPPPFCCB-0-V-LL
L = Laser
WWW=Wavelength and Pin-out
1310nm
1550nm
F=
1=
2=
3=
4=
9=
Fiber Type
9/125 SMF
50/125 MMF
62.5/125 MMF
100/140 MMF
Customer Supplied
PPP = Fiber-Coupled Power
0.1 = 0.10 mW (100 µW)
0.8 = 0.8 mW (800 µW )
0.2 = 0.20 mW (200 µW)
001 = 1.0 mW
0.5 = 0.5 mW (500 µW )
002 = 2.0 mW
B = Bracket Type
A = None
B = Panel Mount
C = Board Mount
O=Orientation
V=Version
0=None
0=Standard Specifications
A=Bracket Shipped Loose (pigtailed units only)
Specify orientation as required
LL = Length in meters (01,02,0.5 etc.) (pigtailed devices only)
CC = Connector Type (pigtailed devices only)
ST = ST/PC SC = SCPC
SA=SC/APC
FC = FC/PC
FA = FC/APC
ST is a registered trademark of AT&T
FU = FC/UPC
OO = No
03-02 PL13/15DFB.Rev.2
30-B Pennington-Hopewell Rd., Pennington NJ 08543 FON: 609-564-7900 FAX: 609-564-7901 EMAIL: [email protected]