P Premier M Magnetics Inc. WIDEBAND RF PULSE COUPLING TRANSFORMERS "INNOVATORS IN MAGNETICS TECHNOLOGY" ! Designed for use in 50 Ω WideBand R.F. and Fast Rise Time Applications " Impedance Levels from 12.5 to 800 Ohms # Frequency Range 10 KHz to 500 MHz $ Low Insertion Loss, 500Vrms Isolation % 6-Pin DIP & Gull Wing Packages ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC TURNS RATIO (± 5%) PRIMARY Inductance µH Min.) (µ PM-WT01 PM-WT02 PM-WT03 PM-WT04 PM-WT05 PM-WT06 1:1 1:2 1:4 1:1ct 1:2ct 1:4ct 80 40 20 80 40 20 2.50 2.00 1.25 2.50 2.00 1.25 2.20 3.00 6.00 3.00 3.00 6.00 12 15 10 15 15 10 0.15 0.14 0.10 0.18 0.14 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.60 0.20 0.30 0.60 0.05 0.10 0.20 0.05 0.10 0.20 110 110 60 90 110 60 B B B E E E PM-WT07 PM-WT08 1ct:1ct 1ct:2ct 80 40 2.50 2.00 3.00 3.00 15 15 0.18 0.14 0.20 0.20 0.20 0.30 0.05 0.10 90 110 C C PM-WT09 PM-WT10 1:1:1 1ct:1ct 40 800 2.00 4.00 2.00 6.00 12 20 0.10 0.30 0.20 0.26 0.20 0.26 0.10 0.005 150 100 A C PART NUMBER ET Rise PRI-SEC V-µ Cw/w µsec Time (Min.) ns Max (pf Max.) PHYSICAL DIMENSIONS .... DIMENSIONS IN INCHES (mm) MECHANICAL THRU-HOLE PACKAGE PM-WTXX .280 SURFACE MOUNT PACKAGE PM-WGXX .310 .280 (7.11) MAX (7.87) MAX .210 (5.33) MAX .020 (0.51) TYP (7.11) MAX .210 (5.33) MAX .008R (0.20) .120 .020 (.51) (3.05) .010 (.25) MIN .050 (1.27) TYP PRI SEC -3dB Bandwidth SchDCR DCR MHz Ω Max.) (Ω Ω Max.) (Ω Low High matic VARIATIONS AVAILABLE. FOR INTERMEDIATE VALUES AND/ OR CUSTOM DESIGNS PLEASE CONSULT THE FACTORY. THRU HOLE OR SURFACE MOUNT: Table Part Numbers are THRU HOLE Change the "T" to "G" for SURFACE MOUNT. Example: PM-WT01 = THROUGH-HOLE PM-WG01 = SURFACE MOUNT .310 (7.87) MAX PRI / SEC LL µH Max.) (µ .010 (0.25) .300 (7.62) .100 (2.54) TYP .050 (1.27) TYP .100 (2.54) TYP .020 (0.51) TYP .340 (8.64) .008R (0.20) .030 (0.76) FLAT .020 (0.51) .425 (10.80) .390 (9.90) .020 (.51) .010 (.25) .010 (0.25) TYP SCHEMATICS SCHEMATIC "A" 5 4 3 4 2 5 2 3 4 3 Specifications subject to change without notice. 6 1 5 2 4 3 SEC. 2 1 SCHEMATIC "E" PRIMARY 5 6 SECONDARY 1 SCHEMATIC "D" PRI. 6 SEC. PRIMARY 1 PRI. 3 SECONDARY 6 PRIMARY 2 TERTIARY SCHEMATIC "C" SECONDARY 1 SCHEMATIC "B" 6 5 4 pm-wt 08/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 1 P Premier M Magnetics Inc. FDDI & GIGABIT COPPER MEDIA COUPLING TRANSFORMERS "INNOVATORS IN MAGNETICS TECHNOLOGY" ! " $ # Optimized for Copper Media Applications of Fast Ethernet & FDDI For use in 150 Ω or 75 Ω systems to ANSI X3T9.5. Frequency Range 2 MHz to 450 MHz. 2000Vrms Isolation (Hi-Pot). ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC PM-WT75 PM-WT76 PM-WT150 PM-WT20 PM-WT30 Baud Rate (MHz) CABLE MEDIA TYPE PART NUMBER 75Ω/150Ω 75Ω/150Ω 150Ω STP 75Ω Coax 150Ω STP 266+ 266+ 266 133 133 PRIMARY* Inductance µH Typ.) (µ 7.0 7.0 15.0 30.0 60.0 TURNS RATIO (± 5%) PRI-SEC Cw/w (pf Max.) PRI / SEC LL µH Max.) (µ 1:1 1ct:1ct 1:1 1:1 1:1 2.5 2.5 2.5 4.0 5.5 0.08 0.08 0.08 0.10 0.10 PRI/SEC Rise -3dB Bandwidth DCR Time MHz Ω Max.) (ns Max.) Low Max. High Typ. (Ω 0.15 0.15 0.15 0.20 0.20 0.50 0.50 0.80 1.50 2.00 2.5 2.5 2.0 0.5 0.5 410 350 410 250 200 APPLICATION NOTE: The PM-WT75 & PM-WT150 versions have been optimized for use with 8B/10B code and NRZ modulation as used in HOTLinkTM for communication. One of the main advantages of 8B/10B code is the elimination of baseline wander concerns (DC bias). Methods of encoding that are not DC balanced, such as FDDI 4B/5B require a compromise in the magnetics design as more turns (higher inductances) are necessary to combat the DC imbalance. Thus the major design consideration for 8B/10B code was to provide sufficient high end bandwidth to allow passage of at least the 3rd hamonic. In a system operating at a 266 MHz baud rate this 3rd harmonic is at 399MHz. The PM-WT75 should be used for both 75Ω & 150Ω applications using 8B/10B coding @ > 266MHz Baud Rates. HOTLinkTM is a Trade Mark of CYPRESS SEMICONDUCTOR Inc. CY7B923 HOTLinkTM Transmitter & CY7B933 HOTLinkTM Receiver. SCHEMATIC MECHANICAL PM-WT75,150,20,30 PHYSICAL DIMENSIONS .... IN INCHES (mm) "G1" PACKAGE 16 16 15 14 13 12 11 10 9 14 13 12 11 1 2 9 10 16 PRIMARY 3 4 5 6 7 15 14 13 12 11 SEC. SECONDARY PRIMARY P PM-WTXX M YYWW PRI. 8 1 10 9 7 8 SEC. PRI. 2 3 4 5 6 FIGURE 3: RECOMMENDED PCB LAYOUT DIMENSION IN INCHES, (mm) 1 2 3 4 5 6 7 7x.050 (1.27) 8 .460 (11.68) MAX .280 (7.11) MAX .210 (5.33) MAX .050 .019 (1.27) (0.48) TYP TYP .010 (.25) .004 (.10) 16 9 1 8 .270 (6.86) PIN#1 WHITE DOT 15 SECONDARY PM-WT76 .020 (0.51) MIN .010 (0.25) TYP .370 (9.40) 16x.025 (.64) 16x.075 (1.91) Specifications subject to change without notice. pm-wt 08/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 2 P Premier M Magnetics Inc. 3KV REINFORCED INSULATION COUPLING TRANSFORMER "INNOVATORS IN MAGNETICS TECHNOLOGY" ! Optimized for use with CYPRESS Semiconductor HOTLinkTM Chip Set. " For use in 150 Ω STP or 75 Ω Coax, Copper Media Applications of Fast Ethernet, FDDI & ATM $ IEC950, UL1950, CSA-950, 3000Vrms Reinforced Insulation System. >6.2mm Creepage/Clearance HOTLinkTM is a Trade Mark of CYPRESS SEMICONDUCTOR Inc. CY7B923 HOTLinkTM Transmitter & CY7B933 HOTLinkTM Receiver. ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -40OC TO +85OC PART NUMBER TSD-1227* CABLE MEDIA TYPE Baud Rate (MHz) 50/75Ω 266+ PRIMARY* Inductance µH Typ.) (µ 7.0 TURNS RATIO (± 5%) PRI-SEC Cw/w (pf Max.) PRI / SEC LL µH Max.) (µ 1:1 1.5 0.13 Rise PRI/SEC -3dB Bandwidth Time DCR MHz Ω Max.) (ns Max.) Low Max. High Min. (Ω 0.15 0.50 2.0 380 *APPLICATION NOTE: Reinforced Insulation System per IEC950, UL1950, CSA-950. The TSD-1227, 3KV reinforced insulation version of the PM-WT75 was optimized for use with 8B/10B code and NRZ modulation as used in HOTLinkTM for communication. One of the main advantages of 8B/10B code is the elimination of baseline wander concerns (DC bias). Methods of encoding that are not DC balanced, such as FDDI 4B/5B require a compromise in the magnetics design as more turns (higher inductances) are necessary to combat the DC imbalance. Thus the major design consideration for 8B/10B code was to provide sufficient high end bandwidth to allow passage of at least the 3rd hamonic. In a system operating at a 266 MHz baud rate this 3rd harmonic is at 399MHz. The TSD-1227 should be used for both 75Ω & 150Ω applications using 8B/10B coding @ > 266MHz Baud Rates. SCHEMATIC MECHANICAL RECOMMENDED PCB LAYOUT DIMENSION IN INCHES, (mm) PHYSICAL DIMENSIONS .... IN INCHES (mm) .760 (19.30) .520 (13.21) 16x.120 (3.05) 7x.100 (2.54) 1 16 15 14 13 12 11 10 16 16x.050 (1.27) 9 .700 (17.78) P TSD-1227 M YYWW PIN#1 DOT 8 1 2 3 4 5 6 7 .580 (14.73) 8 16 .950 (24.13) MAX .390 (9.91) MAX 1 .020 (0.51) TYP .050 (1.27) TYP Specifications subject to change without notice. 9 .100 (2.54) TYP .020 (.51) .010 (.25) .050 (1.27) FLAT .030 (0.76) 15 14 13 12 11 10 9 SECONDARY SECONDARY PRIMARY PRIMARY 2 3 4 5 6 7 8 .010 (0.25) TYP pm-wt 08/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 3