DIODES PR3003G-T

PR3001G - PR3007G
3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER
Features
·
·
·
·
·
Glass Passivated Die Construction
Fast Switching for High Efficiency
Surge Overload Rating to 125A Peak
B
A
Low Reverse Leakage Current
A
Lead Free Finish, RoHS Compliant (Note 4)
C
D
Mechanical Data
·
·
·
·
·
·
·
·
Case: DO-201AD
DO-201AD
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
Dim
Min
Max
Moisture Sensitivity: Level 1 per J-STD-020C
A
25.40
¾
Terminals: Finish ¾ Tin. Plated Leads Solderable per
e3
MIL-STD-202, Method 208
B
7.20
9.50
C
1.20
1.30
D
4.80
5.30
Polarity: Cathode Band
Marking: Type Number
All Dimensions in mm
Ordering Information: See Last Page
Weight: 1.12 grams (approximate)
Maximum Ratings and Electrical Characteristics
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
PR
PR
PR
PR
PR
PR
PR
Symbol 3001G
3002G 3003G 3004G 3005G 3006G 3007G
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
Unit
VRRM
VRWM
VR
50
100
200
400
600
800
1000
V
VR(RMS)
35
70
140
280
420
560
700
V
Average Rectified Output Current
(Note 1)
@ TA = 55°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
IO
3.0
A
IFSM
125
A
Forward Voltage
@ IF = 3.0A
VFM
1.3
V
@ TA = 25°C
@ TA = 125°C
IRM
5.0
100
mA
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
Reverse Recovery Time (Note 3)
trr
Typical Total Capacitance (Note 2)
CT
50
pF
RqJA
32
°C/W
Tj, TSTG
-65 to +150
°C
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Notes:
1.
2.
3.
4.
5.
150
250
500
ns
Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.
RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
Short duration pulse test used to minimize self-heating effect.
DS27003 Rev. 6 - 2
1 of 3
www.diodes.com
PR3001G - PR3007G
ã Diodes Incorporated
IF, INSTANTANEOUS FOWRARD CURRENT (A)
I(AV), AVERAGE FORWARD RECTIFIED
CURRENT (A)
4
Single phase half wave
Resistive or Inductive load
3
2
1
0
0
25
50
75
100 125
150
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Forward Derating Curve
1.0
0.1
Tj = 25°C
0.01
175
200
0.6
0.8
1.0
1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
100
Tj = 25°C
f = 1 MHz
CT, TOTAL CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
10
100
10
1
10
1
10
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Peak Forward Surge Current
1
100
10
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance
100
trr
+0.5A
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
Oscilloscope
(Note 1)
-0.25A
(+)
-1.0A
Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS27003 Rev. 6 - 2
2 of 3
www.diodes.com
PR3001G - PR3007G
Ordering Information
Notes:
(Note 6)
Device
Packaging
Shipping
PR3001G-B
DO-201AD
500/Bulk
1.2K/Tape & Reel, 13-inch
PR3001G-T
DO-201AD
PR3002G-B
DO-201AD
500/Bulk
PR3002G-T
DO-201AD
1.2K/Tape & Reel, 13-inch
PR3003G-B
DO-201AD
500/Bulk
PR3003G-T
DO-201AD
1.2K/Tape & Reel, 13-inch
PR3004G-B
DO-201AD
500/Bulk
PR3004G-T
DO-201AD
1.2K/Tape & Reel, 13-inch
PR3005G-B
DO-201AD
500/Bulk
PR3005G-T
DO-201AD
1.2K/Tape & Reel, 13-inch
PR3006G-B
DO-201AD
500/Bulk
1.2K/Tape & Reel, 13-inch
PR3006G-T
DO-201AD
PR3007G-B
DO-201AD
500/Bulk
PR3007G-T
DO-201AD
1.2K/Tape & Reel, 13-inch
6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
DS27003 Rev. 6 - 2
3 of 3
www.diodes.com
PR3001G - PR3007G