2WOXG/2WOXMG SERIES GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 2.0 Amperes FEATURES WOB WOBM .366(9.3) .350(8.9) ● Surge overload rating -60 amperes peak ●Ldeal for printed circuit board .386(9.8) .354(9.0) .220(5.6) .200(5.1) ●Reliable low cost construction utilizing molded plastic .181(4.6) .150(3.8) technique results in expensive product ●Mounting Position :Any ●Lead:sliver plated copper lead. 1.1 (27.9) MIN 1.0 (25.4) MIN 1.1 (27.9) MIN .032(0.81) POS. .028(0.71) LEAD 1.0 (25.4) MIN .032(0.81) .028(0.71) POS. LEAD .220(5.6) .180(4.6) .220(5.6) .180(4.6) .220(5.6) .180(4.6) SPACING .220(5.6) .180(4.6) SPACING Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G 2W005MG 2W01MG 2W02MG 2W04MG 2W06MG 2W08MG 2W10MG UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=25℃ I(AV) 2.0 A IFSM 60 A I2t 15.0 A2s VF 1.1 V Peak Forward Surge Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop per Element at 2.0A Peak Maximum Reverse Current at Rated TJ=25℃ DC Blocking Voltage TJ=100℃ IR 10.0 μA 1.0 mA Typical Junction Capacitance Per Element (Note1) CJ 30 pF Operating Temperature Range TJ -55 to +150 ℃ Operating Temperature Range TSTG -55 to +150 ℃ Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. ~ 400 ~ RATING AND CHARACTERTIC CURVES 2WOXG/2WOXMG SERIES FIG.1-FORATING CURVE OUTPUT RECTIFIED CUURRENT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD OUTPUTCURRENT AMPERES 2.0 PEAK FORWARD SURGE CURRENT, AMPERES 60 0 50 100 50 40 30 20 SINGLE SINE-WAVE JEDEC METHOD 10 0 150 1 2 5 INSTANTANEOUS FORWARD CURRENT AMPERES 10.0 T J=100℃ 0.1 T J=25℃ 0.01 40 60 80 100 120 140 100 T J=25℃ TYPICAL DISTRIBUTION 1.0 0.1 0.01 0.4 PERCENT OF RATED PEAK REVERSE VOLTAGE 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 40 CAPACITANCE,(pF) INSTANTANEOUS REVERSE CURRENT, MICROAMPERRES 10 20 50 FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPIACL REVERSE CHARACTERISTICS 0 20 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE ℃ 1.0 10 20 10 6.0 4.0 T J=25℃, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 REVERSE VOLTAGE,VOLTS ~ 401 ~ 10 20 40 100