RS201G thru RS207G REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS RS-2 .709(19.0) .669(17.0) .078(2.0)*45° FEATURES ●Surge overload rating -50 amperes peak ●Ideal for printed circuit board .551(14.0) .512(13.0) ●Reliable low cost construction utilizong molded plastic .610(15.5) .571(14.5) technique results in expensive product ●Mounting position :Any .035(0.9)DIA .028(0.7)TYP. .750 MIN. (19.0) .160(4.1) .140(3.6) .276(7.0) .236(6.0) .148(3.75) .108(2.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL RS201G RS202G RS203G RS204G RS205G RS206G RS207G Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current 0.375″（9.5mm) Lead Lengths Peak Forward Surge Current , @T A=40 ℃ 8.3ms Single Half Sine-Wave 1000 UNIT 100 200 400 600 800 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V I(AV) 2.0 A IFSM 50 A I2t 15.0 A2s VF 1.1 V Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated TJ=25℃ DC Blocking Voltage T J=100℃ Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range 10.0 μA 1.0 mA CJ 30 pF TJ -55 to +150 ℃ TSTG -55 to +150 ℃ IR Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. REV. 1, 20-Feb-2014 ~ 458 ~ RATING AND CHARACTERISTIC CURVES RS201G thru RS207G FIG.2-MXIMUM NON-REPETITIVE SURGE CURRENT 2.0 50 PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0 100 50 40 30 20 Pulse Wldth 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 150 5 10 20 50 100 NUMBER OFCYCLES AT 60Hz AMBIENT TEMPERATURE ,℃ FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.4-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT,(A) TJ=100℃ 1.0 0.1 TJ=25℃ 1.0 0.1 TJ=25°C PULSE WIDTH:300us 2% DUTY CYCLE 0.01 0 40 20 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 40 CAPACITANCE,(pF) INSTANTANCEOUS REVERSE CURRENT, MICRAMPERES 10 20 10 6.0 4.0 TJ=25°C, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 REVERSE VOLTAGE,VOLTS REV. 1, 20-Feb-2014 ~ 459 ~