JDSU 30-7602-620

COMMUNICATIONS COMPONENTS
Up to 660 mW Fiber Bragg Grating Stabilized 980 nm Pump Modules
3000 Series
Key Features
• Very high kink-free powers to 660 mW
• Low-profile, epoxy-free, and flux-free 14-pin butterfly
planar package with PM fiber
• Fiber Bragg grating stabilization
• Multiple wavelength availability
• Integrated thermoelectric cooler, thermistor, and monitor diode
• High dynamic range
• Excellent low-power stability
Applications
• Next-generation dense wavelength
division multiplexing (DWDM)
erbium doped fiber amplifiers
(EDFAs) requiring the highest power
with “locked” wavelength emission
• Reduced pump-count EDFA
architectures
• Very long distance cable television
(CATV) trunks and very high nodecount distribution
• Pump splitting (multiple EDFA stages)
• FTTx, Agile metro/ROADM
The JDSU 3000 Series 980 nm pump module uses a planar construction with chip
on subcarrier. The high-power laser chip is hermetically sealed in a low-profile,
epoxy- and flux-free 14-pin butterfly package and fitted with a thermistor,
thermoelectric cooler, and monitor diode. This product uses a polarization
maintaining fiber (PMF) pigtail that allows excellent side mode supression ratios
(SMSR) over a very wide dynamic range.
The 3000 Series pump module uses PM fiber Bragg grating stabilization to “lock”
the emission wavelength. It provides a noise-free narrowband spectrum, even
under changes in temperature, drive current, and optical feedback. Wavelength
selection is available for applications that require the highest performance in
spectrum control with the highest available powers.
Compliance
• Telcordia GR-468-CORE
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
3000 SERIES PUMPS
2
Dimensions Diagram
(Note: Specifications in mm unless otherwise noted; tolerance = .x ± .3, .xx ± .20.)
45.04
1600 M I N (1900 NOM )
30.0
1000 NOM . TO CENTER OF GRATING
26 . 0
500 NOM . TO C/L OF SPLICE (OPTIONAL)
20 . 8
17.8
1 .5
4 0 . 5 N O M . 1 5 . 5 1 2. 7
9 .0
STRAIN RELIEF
4.6
4X
FLEXIBLE <=400
MICRON RECOAT
2 .5 0 TH RU
1 2X 2 . 5 L E A D S P A C I N G
T O L E R A N C E I S N O N -A C C U M U L A T I V E
260 < RECOAT <
935 (MICRON)
14X 0.51 LEAD WIDTH
RED NON-XYLENE MARK
FOR RECOAT WITH 295 35 μm
2.8
4.0 0
1.50
7 . 7 ±0. 20
3. 9
5 . 6 T O L EA D C / L
1.5
2X ~ 5
5. 2 6
0.25 LEAD THICKNESS
Pinout
Pin
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Cooler (+)
Thermistor
Monitor PD anode
Monitor PD cathode
Thermistor
N/C
N/C
N/C
N/C
Laser anode
Laser cathode
N/C
Case ground
Cooler (-)
7
6
5
4
3
2
1
8
9
10
11
12
13
14
3000 SERIES PUMPS
3
Absolute Maximum Ratings
Parameter
Symbol
Test Condition
Minimum
Maximum
Operating case temperature
Storage temperature
Laser operating temperature
LD reverse voltage
LD forward current
LD current transient
LD reverse current
PD reverse voltage
PD forward current
Electrostatic discharge (ESD)
Cooler current
Atmospheric pressure
Storage
Operating
Relative humidity
Lead soldering time
Top
Tstg
TLD
Vr
If_max
2000 hours
Unlimited time
1 µs maximum
C = 100 pF, R = 1.5 Ω, human body model
-
-5°C
-40°C
0°C
-
75°C
85°C
50°C
2.0 V
1400 mA
1500 mA
10 µA
20 V
10 mA
1000 V
4A
Non condensing
260°C
5%
-
11 kPa
58 kPa
95%
10 seconds
VPD
IPF
VESD
IC
RH
Note: Each device is rated to a maximum kink-free current (Imax), provided on the individual datasheet. This is the maximum current under which the device will perform its intended function. Operation
above Imax, and up to the absolute maximum rating, may result in poor device performance, and degrade device reliability. Long-termoperation above Imax may lead to early device failure.
Operating Parameters
Product Code
Operating Power
Pop (mW)
Operating Current
Iop (mA)
Kink-Free Power
Pmax (mW)
Kink-Free Current
Imax (mA)
30-xxxx-500
30-xxxx-520
30-xxxx-540
30-xxxx-560
30-xxxx-580
30-xxxx-600
30-xxxx-620
30-xxxx-640
30-xxxx-660
450
460
480
500
520
540
560
580
600
1000
1020
1060
1100
1150
1200
1250
1250
1250
500
520
540
560
580
600
620
640
660
1100
1150
1200
1250
1300
1350
1400
1400
1400
3000 SERIES PUMPS
4
Available Peak Wavelength Selection
Product Code
Peak Wavelength
Peak Wavelength Tolerance
30-7402-xxx
30-7602-xxx
30-8000-xxx
974.0 nm
976.0 nm
980.0 nm
-0.5/+1.0 nm
±1 nm
-6/+5 nm
Electro-Optical Performance
(BOL,Tcase = -5 to 75°C, Pf range = 20 mW to Pmax, -50 dB reflection, unless noted otherwise)
Parameter
Symbol
Test Condition
Minimum
Maximum
Threshold current
Laser diode temperature
Forward voltage
Operating power
Kinkfree output power
Wavelength
Pump in pump band
Spectral width
Wavelength tuning vs. temperature
Optical power stability
Ith-BOL
TLD
Vf
Pop
Pmax
λm
Ppump
ΔλRMS
Δλ/T
ΔPf_t
If = Iop
If = Iop
If = Imax
Pump band = λm±1.5 nm
Over Pf range, DC to 50 kHz,
50 kHz sampling, Tcase = 25°C
20 mW < Pop < 100 mW
100 mW < Pop < 600 mW
If = Imax, TLD = 25°C, see table on next page
Tset = 25°C
-
20°C
20 mW
500 mW
973 nm
90%
-
35 mA
30°C
2.6 V
Pop
660 mW
985 nm
2.0 nm
0.02 nm/°C
1 µA/mW
50°C
9.5 kΩ
3600 K
4%
2.5%
10 µA/mW
10.5 kΩ
4200 K
Monitor diode responsivity
TEC cooling capacity
Thermistor resistance
Thermistor constant
IBF
ΔTEC
Rth
B
3000 SERIES PUMPS
5
(For ΔT = 50°C, BOL, Tcase = 75°C, Tld = 25°C unless noted otherwise)
TEC and Total Module Power Consumption
Product Code
TEC Current
Imax (A)
TEC Voltage
Vmax (V)
TEC Power Consumption
Pmax (W)
Total Module Power
Consumption Pmax (W)
30-xxxx-500
30-xxxx-520
30-xxxx-540
30-xxxx-560
30-xxxx-580
30-xxxx-600
30-xxxx-620
30-xxxx-640
30-xxxx-660
1.94
1.97
2.01
2.03
2.06
2.09
2.20
2.20
2.20
2.69
2.73
2.76
2.78
2.80
2.83
2.90
2.90
2.90
5.22
5.38
5.55
5.64
5.77
5.91
6.38
6.38
6.38
7.17
7.38
7.66
7.87
8.14
8.45
9.19
9.19
9.19
Panda PM-980 Polarization Maintaining Fiber Nominal Characteristics and Tolerances
Parameter
Specification
Cutoff wavelength
Maximum attenuation at 980 nm
Cladding outside diameter
Coating outside diameter
Mode field diameter at 980 nm
Cross talk at 100 m
Maximum beat length
Operating temperature
Fiber tensile proof strength (tested)
950 nm
3.0 dB/km
125±3 µm
250±3 µm
6.6±1.1 µm
-25 dBm/2 m
3.3 mm
-40 to 85°C
200 kpsi
3000 SERIES PUMPS
6
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at
[email protected].
Sample: 30-7402-520
-
30Code
7402
7602
8000
Peak Wavelength
973.5 to 975.0 nm
975.0 to 977.0 nm
974.0 to 985.0 nm
Code
500
520
540
560
580
600
620
640
660
Minimum Kink-Free Power
500 mW
520 mW
540 mW
560 mW
580 mW
600 mW
620 mW
640 mW
660 mW
User Safety
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the
fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser diode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with
this component cannot exceed maximum peak optical power.
CW laser diodes may be damaged by excessive drive current or switching transients. When using power supplies, the laser
diode should be connected with the main power on and the output voltage at zero. The current should be increased slowly
while monitoring the laser diode output power and the drive current. Careful attention to heatsinking and proper mounting
of this device is required to ensure specified performance over its operating life. To maximize thermal transfer to the heatsink,
the heatsink mounting surface must be flat to within .001” and the mounting screws must be torqued down to 1.5 in.-lb.
ESD PROTECTION — Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme
precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling laser diodes.
3000 SERIES PUMPS
Labeling
Because of the small size of these
devices, the output power and laser
emission indicator label shown below is
attached to the individual shipping
container. All labels are illustrated here
to comply with 21 CFR 1040.10 as
applicable under the Radiations Control
for Health and Safety Act of 1968.
14-Pin Module Label
02/09/07 30-ABC123
30-xxxx-xxx
Made in China
Shipping Box Label
Serial:
30-ABC123
Model:
30-xxxx-xxx
JDS Uniphase (Shenzhen) Ltd
3 Hongmian Road
Futian Free Trade Zone
Shenzhen, China 518038
Made in China
02/09/07
21 CFR 1040.10 Compliance
Output Power and Laser Emission Indicator Label
DANGER
INVISIBLE
LASER DIODE
INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER 660 mW
WAVELENGTH 630 - 1,550 nm
CAUTION -
Handle with care. Easily damaged
by electrostatic discharge
This product complies with 21 CFR Chapter 1, Subchapter J
CLASS 4 LASER PRODUCT
NORTH AMERICA : 800 498-JDSU (5378)
AVOID EXPOSURE
Visible/invisible
radiation emitted
from fiber end or
fiber receptacle
WORLDWIDE : +800 5378-JDSU
Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30149049 004 0309
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
WEBSITE : www.jdsu.com
3000PUMP.DS.CC.AE
March 2009