Optoway PT-5330 ******************************************************************************************************************************************************* 3.3V / 622 Mbps InGaAs PIN-TIA Receiver PT-5330 Series InGaAs PIN-TIA WITH PIGTAIL ************************************************************************************************************************************************************ FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² Single +3.3 V operation ² Speed up to 622 Mbps ² - 40 ~ +85 ºC operation temperature DESCRIPTION PT-5330 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially SONET OC-12 / SDH STM-4, and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Test Conditions Min. Typ. Max. Unit 1100 1310 1650 nm AC coupled, load=50 Ω 16 20 24 V/mW Bandwidth -3 dB point 450 Saturation Power λ=1300nm -3 Dectection Range G BW Psat Differential Gain Sens Sensitivity Rout Output Resistance -10 BER=10 @622Mbps MHz - dBm - -31 -30 dBm - 50 65 ohm 622 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Min. Typ. Max. Unit Vcc Power Supply 3.15 3.3 3.45 V Icc Supply Current (no load) - 40 mA ABSOLUTE MAXIMUM RATING (Tc=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 10/1/2002 V1.0 Optoway PT-5330 ******************************************************************************************************************************************************* MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − 5 3 □ 3 Code Fiber 0 SMF, 9/125 µm 1 MMF, 50/125 µm 2 MMF, 62.5/125 µm □ − □ □ □ Code PIN Assignment Blank B Type A Type B Code Flange V Vertical H Horizontal X No Flange Code S F T X SA FA TA Connector SC/PC FC/PC ST/PC No Connector SC/APC FC/APC ST/APC ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 10/1/2002 V1.0