Optoway PT-5130 ************************************************************************************************************************************************************ 3.3V / 622 Mbps InGaAs PIN-TIA Receiver PT-5130 Series InGaAs PIN-TIA Receiver ************************************************************************************************************************************************************ FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² Single +3.3V operation ² Speed Up to 622 Mbps ² - 40~+85 ºC operation temperature DESCRIPTION PT-5130 series is designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for datacom and telecom applications, especially SONET OC-12/ SDH STM-4. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm Active Area μm 75 G Differential Gain λ=1300 nm, 50 MHz 16 20 24 V/mW BW Bandwidth -3 dB point 450 - - MHz Psat Saturation Power λ=1300nm -3 - dBm -10 Sens Sensitivity BER=10 Rout Output Resistance at 622Mbps Speed - -31 -30 dBm - 50 65 ohm 622 Mbps DC / ELECTRICAL CHARACTERISTICS (TC=25°C) Symbol Parameter VCC Power Supply ICC Supply Current (no load) Min. Typ. Max. Unit 3.1 3.3 3.5 V - 30 50 mA ABSOLUTE MAXIMUM RATING (TC=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/1/2003 V2.0 Optoway PT-5130 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − 5 1 3 0 □ Code PIN Assignment Blank Type A B Type B ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/1/2003 V2.0