Optoway PT-9330 SERIES ******************************************************************************************************************************************************* 3.3V / 2.5 Gbps InGaAs PIN-TIA Receiver PT-9330 InGaAs PIN-TIA WITH PIGTAIL ******************************************************************************************************************************************************* FEATURES ! InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ! Differential ended output ! Single +3.3 V operation ! Speed up to 2.5 Gbps ! - 40 ~ +85 ºC operation temperature DESCRIPTION PT-9330 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially Gigabit Ethernet, Fiber Channel and SONET OC-48. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm 2 2.5 3 V/mW 2 G Differential Gain AC coupled, Load=50 Ω BW Bandwidth -3 dB point 1.5 Psat Saturation Power λ=1300nm -3 Sens Sensitivity Rout Output Resistance -10 BER=10 @2.5 Gb/s - GHz dBm -21 -19 dBm 50 65 ohm 2500 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Min. Typ. Max. Unit Vcc Power Supply 3.15 3.3 3.45 V Icc Supply Current (no load) - 40 60 mA ABSOLUTE MAXIMUM RATING (Tc=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 11/1/2002 Optoway PT-9330 SERIES ******************************************************************************************************************************************************* MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − Code Voltage 0 5V 3 3.3V 9 3 □ □ 3 Code Fiber 0 SMF, 9/125 µm 1 MMF, 50/125 µm 2 MMF, 62.5/125 µm − □ □ □ Code PIN Assignment Blank B Type A Type B Code Flange V Vertical H Horizontal X No Flange Code S F T X SA FA TA Connector SC/PC FC/PC ST/PC No Connector SC/APC FC/APC ST/APC ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 11/1/2002