PL IA NT Features CO M ■ Carbon element *R oH S ■ Assortment of resistance tapers ■ Push latching shaft ■ Flatted, knurled and slotted shaft styles ■ Center detent option PTP90 Series Panel Control w/Push Latching Shaft Electrical Characteristics Standard Resistance Range ........................1K ohms to 1 megohm Standard Resistance Tolerance R < 250K ohms .........................±20 % R ≥ 250K ohms .........................±30 % End Resistance R < 50K ohms .............. 30 ohms max. R ≥ 50K ohms ......... 0.1 % of TR max. Insulation Resistance @ 250 VDC ............................. 100 megohms min. Dielectric Withstanding Voltage ..............................................300 VAC Tracking Error (-40 dB to 0 dB) .....±3 dB Standard Taper .................. Linear, Audio Power Rating Linear ................................... 0.05 watt Audio .................................. 0.025 watt Slider Noise .......................100 mV max. Operating Voltage ....... 50 VAC / 10 VDC Environmental Characteristics Operational Life ................15,000 cycles TR Shift .....................................±15 % Operating Temperature Range ..................................-10 °C to +55 °C Resistance to Solder Heat ..............±5 % IP Rating .........................................IP 40 Mechanical Characteristics Mechanical Angle ..................310 ° max. Operating Torque ..............20~250 gf-cm Stop Strength.................... 4 kgf-cm min. Mounting Torque ............ 10 kgf-cm max. Shaft Push Latch Force ..........40~500 gf Push Latch Operating Life ......................................10,000 cycles Soldering Condition Manual ........... 300 °C ±5 °C for 3 sec. Wave .............. 260 °C ±5 °C for 5 sec. Wash ..................... Not recommended Hardware ................One flat washer and one mounting nut supplied with each potentiometer Product Dimensions (Shown with Knurled Shaft) 23.25 (0.915) PUSH TRAVEL 9.0 ± 0.5 (0.354 ± 0.020) PUSH LATCH TRAVEL 8.0 (0.315) 6.0 (0.236) 10.0 (0.394) 0.5 (0.020) R2 R1 0.75 0.030 M7 x SHAFT SLOT IS OPTIONAL ANGLE X X 1 2 3 1.0 ± 0.1 (0.039 ± 0.004) 6.0 (0.236) DIA. 0.9 ± 0.1 (0.035 ± 0.004) Locating Lug Detail 2.5 (0.098) Y 5.0 (0.197) X X 6.0 ± 0.2 (0.236 ± 0.008) MOUNTING SURFACE DIA. 1.0 +0.1/-0 (0.039 +0.004/-0) 6 PLCS. 5.0 (0.197) Y 0.8 ± 0.2 (0.315 ± 0.008) 2.0 ± 0.1 (0.079 ± 0.004) Hardware Resistance Code 102 202 502 103 203 503 104 204 504 105 *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIA. 12.0 (.472) 7.2 DIA. (.283) M7 x 0.75 (.030) DIA. 12.7 (.500) 11.0 (.433) DIA. 2.0 (.079) NUT 0.5 (.020) WASHER DIMENSIONS: MM (INCHES) 6.5 ± 0.5 (0.256 ± 0.002) Y 10.7 (0.421) Mounting Hole Detail 9.5 (0.374) 4.85 (0.191) Y C1 7.0 (0.276) 0.8 ± 0.2 (0.031 ± 0.002) Standard Resistance Table Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 30.0 ± 0.8 (1.181 ± 0.031) 3.5 (0.138) Applications ■ Multimedia sound systems ■ Mixers / drum machines / DJ equipment ■ Automotive sound systems ■ Portable electronics ■ Portable appliances PTP90 Series Panel Control w/Push Latching Shaft Additional Shaft Styles Tapers Flatted Shaft A Series Tapers 100 30.0 (1.181) 10.0 (0.394) 0.75 M7 X (0.030) DIA. 4.5 +0/-0.1 (0.177 +0.004) 6.0 +0/-0.05 (0.236 +0.002) DIA. 60 ° ±10 °/-5 ° 4.5 (0.177) SHAFT SHOWN IN FULL CCW POSITION C1 9.0 ± 0.5 (0.354 ± 0.020) PUSH TRAVEL Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 90 10.7 (0.428) 8.3 (0.327) 8.0 (0.315) PUSH LATCH TRAVEL 80 70 60 50 40 (3 30 0A );A 6 4 A);A 3 (20 A);A (15 0A);A2 20 10 (1 10 20 30 40 50 1 A);A (05 0 A5 A); (25 60 70 80 Rotational Travel (%) Terminal 1 90 100 Terminal 3 Slotted Shaft B Series Tapers M7 X 0.75 (0.030) 9.0 ± 0.5 (0.354 ± 0.020) PUSH TRAVEL DIMENSIONS: 100 );B5 60 ° ±10 °/-5 ° C1 SHAFT SHOWN IN FULL CCW POSITION (4B );B 4 3 80 70 60 50 40 30 20 10 MM (INCHES) 0 10 20 30 Terminal 1 PTP90 2 - 0 30 K - 103 B2 Model Number Designator PTP90 = Panel Control w/Push Latching Shaft Number of Sections 1 = Single Gang 2 = Dual Gang Center Detent 0 = No Detent 1 = Center Detent Shaft Length (FMS) 30 = 30 mm Shaft Style F = Flatted Metal K = Knurled (18 tooth serrated) S = Slotted Metal Resistance Code (See Standard Resistance Table) Resistance Taper (See Taper Charts) Taper Series followed by Curve Number 40 50 60 70 80 Rotational Travel (%) 90 100 Terminal 3 Schematics Single Gang C Series Tapers 100 2 90 3 R1 1 Dual Gang 2 R1 1 3 R2 1' 3' Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 How To Order (1 (2 B) B) ;B ;B 2 1 (5B 90 );B 10.0 (0.394) PUSH LATCH TRAVEL 8.0 (0.315) 1.6 ± 0.2 (0.063 ± 0.008) 1.0 (0.039) 6.0 (0.236) DIA. (3B 10.7 (0.428) Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 30.0 (1.181) 80 70 60 50 40 (3 0C 6 C) ;C5 20 (1 0C ) ;C 10 2' );C (25 30 2 (05 C);C 1 0 10 Terminal 1 20 30 40 (20 C);C 4 (15 C);C 3 50 60 Rotational Travel (%) 70 80 90 100 Terminal 3 REV. 10/11 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.