Document 591-1 Surface Mount Wideband RF Transformers • Cost effective surface mount wideband transformers • 400 V interwinding isolation, 1/4 Watt RF input power • 250 mA max current rating. Core material Ferrite Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 250 – 270 mg Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332 Packaging 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth PCB washing Only pure water or alcohol recommended Typical Frequency Response Dimensions Part number PWB-1-AL_ PWB-1.5-AL_ PWB-2-AL_ PWB-4-AL_ PWB-16-AL_ PWB1010L_ PWB1010-1L_ PWB1015L_ PWB1040L_ 3 dB (MHz) 0.08 – 450 0.03 – 300 0.05 – 200 0.15 – 500 0.05 – 80 0.0035 – 125 0.03 – 250 0.07 – 225 0.15 – 400 2 dB (MHz) 0.13 – 325 0.035 – 250 0.06 – 160 0.24 – 300 0.06 – 75 0.0045 – 100 0.04 – 225 0.10 – 200 0.25 – 350 1 dB (MHz) 0.30 – 190 0.06 – 150 0.10 – 100 0.60 – 140 0.11 – 30 0.007 – 80 0.06 – 200 0.20 – 125 0.80 – 250 PWB-1-BL_ PWB-1.5-BL_ PWB-2-BL_ PWB-4-BL_ PWB-16-BL_ PWB2010L_ PWB2010-1L_ PWB2040L_ 0.13 – 425 0.50 – 250 0.20 – 400 0.14 – 700 0.075 – 90 0.0035 – 125 0.03 – 250 0.15 – 400 0.18 – 325 0.80 – 175 0.225 – 275 0.20 – 400 0.11 – 75 0.0045 – 100 0.04 – 225 0.25 – 350 0.32 – 190 1.50 – 120 0.50 – 150 0.40 – 150 0.20 – 65 0.007 – 80 0.06 – 200 0.80 – 250 PWB-1-CL_ PWB-1.5-CL_ PWB-2-CL_ PWB-4-CL_ PWB3010L_ PWB3010-1L_ PWB3015L_ PWB3040L_ 0.10 – 300 0.15 – 200 0.13 – 285 0.14 – 500 0.0035 – 125 0.03 – 250 0.07 – 225 0.15 – 400 0.13 – 200 0.225 – 150 0.20 – 175 0.20 – 230 0.0045 – 100 0.04 – 225 0.10 – 200 0.25 – 350 0.20 – 150 0.35 – 100 0.325 – 125 0.40 – 110 0.007 – 80 0.06 – 200 0.20 – 125 0.80 – 250 Indicates pin 1 Part number 1 2 3 XXXX YYYY CHINA 6 5 0.256 ±0.008 6,48 ±0,20 4 Internal code 0.267 ±0.008 6,77 ±0,20 0.175 ±0.008 4,45 ±0,20 0.290 7,37 0.283 ±0.010 7,20 ±0,25 0.06 1,52 1 0.04 1,00 inches Dimensions are in mm 0.100 ±0.004 2,54 ±0,10 0.100 2,54 0.02 0,5 0.05 1,27 Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2010 Document 591-1 6 Recommended Land Pattern Revised 01/04/10 Document 591-2 Surface Mount Wideband RF Transformers Type 1 6 3 4 Type A 1 6 5 3 4 Type B 1 6 2 5 3 4 Type C Part number1 PWB-1-AL_ PWB-1.5-AL_ PWB-2-AL_ PWB-4-AL_ PWB-16-AL_ PWB1010L_ PWB1010-1L_ PWB1015L_ PWB1040L_ Impedance ratio2 pri:sec 1:1 1:1.5 1:2 1:4 1:16 1:1 1:1 1:1.5 1:4 Bandwidth (MHz) 0.08 - 450 0.03 - 300 0.05 - 200 0.15 - 500 0.05 - 80 0.0035 - 125 0.03 - 250 0.07 - 225 0.15 - 400 Idc (mA) 250 250 250 250 250 250 250 250 250 Insertion loss max (dB) 0.60 0.35 0.25 0.50 0.35 0.20 0.20 0.40 0.40 L min3 (µH) 40 110 75 25 75 780 95 51 25 Pins 1-3 DCR max (Ohms) 0.070 0.080 0.088 0.075 0.260 0.320 0.200 0.130 0.115 L min3 (µH) 40 160 150 98 1250 780 95 80 95 Pins 6-4 DCR max (Ohms) 0.070 0.110 0.120 0.135 0.910 0.320 0.200 0.145 0.160 PWB-1-BL_ PWB-1.5-BL_ PWB-2-BL_ PWB-4-BL_ PWB-16-BL_ PWB2010L_ PWB2010-1L_ PWB2040L_ 1:1 1:1.5 1:2 1:4 1:16 1:1 1:1 1:4 0.13 - 425 0.50 - 250 0.20 - 400 0.14 - 700 0.075 - 90 0.0035 - 125 0.03 - 250 0.15 - 400 250 250 250 250 250 250 250 250 0.40 0.40 0.35 0.50 0.30 0.20 0.20 0.40 22 140 75 25 75 780 95 25 0.070 0.100 0.088 0.075 0.260 0.320 0.200 0.115 22 200 150 98 1250 780 95 95 0.070 0.120 0.130 0.135 0.910 0.320 0.200 0.160 PWB-1-CL_ PWB-1.5-CL_ PWB-2-CL_ PWB-4-CL_ PWB3010L_ PWB3010-1L_ PWB3015L_ PWB3040L_ 1:1 1:1.5 1:2 1:4 1:1 1:1 1:1.5 1:4 0.10 - 300 0.15 - 200 0.13 - 285 0.14 - 500 0.0035 - 125 0.03 - 250 0.07 - 225 0.15 - 400 250 250 250 250 250 250 250 250 0.60 0.30 0.30 0.50 0.20 0.20 0.40 0.40 22 140 75 25 780 95 51 25 0.070 0.110 0.105 0.075 0.320 0.200 0.130 0.115 22 200 150 98 780 95 80 95 0.070 0.120 0.130 0.135 0.320 0.200 0.145 0.160 1. When ordering, please specify termination and packaging codes: PWB-3010-1LD Termination: L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Special order: S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine ready reel. EIA-481 embossed plastic tape, 250 parts per full reel. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel). 2. Impedance ratio is for the full primary winding to the full secondary winding. 3. Inductance tested at 130 kHz, 0.1 Vrms, 0 Adc. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2010 Document 591-2 Revised 01/04/10 Document 591-3 Type A Transformers -1 0 dBm Attenuation dBm Attenuation -1 0 1 2 3 4 5 PWB-1-A 3 dB bandwidth 0.08 - 450 MHz 6 7 8 0.01 0.1 1 10 100 1 2 3 4 5 7 8 1000 PWB1010 3 dB bandwidth 0.0035 - 125 MHz 6 0.001 0.01 0.1 dBm Attenuation dBm Attenuation 1 2 3 4 5 PWB-1.5-A 3 dB bandwidth 0.03 - 300 MHz 6 0.01 0.1 1 10 1 3 4 5 100 PWB1010-1 3 dB bandwidth 0.03 - 250 MHz 6 7 8 1000 0.01 0.1 1 dBm Attenuation dBm Attenuation 100 1000 -1 0 1 2 3 4 5 PWB-2-A 3 dB bandwidth 0.05 - 200 MHz 6 0.01 0.1 1 10 1 2 3 4 5 7 8 100 PWB1015 3 dB bandwidth 0.07 - 225 MHz 6 1000 0.01 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) -1 0 dBm Attenuation -1 0 dBm Attenuation 10 Frequency (MHz) -1 0 1 2 3 4 5 PWB-4-A 3 dB bandwidth 0.15 - 500 MHz 6 7 8 100 2 Frequency (MHz) 7 8 10 -1 0 -1 0 7 8 1 Frequency (MHz) Frequency (MHz) 0.01 0.1 1 10 1 2 3 4 5 7 8 100 1000 PWB1040 3 dB bandwidth 0.15 - 400 MHz 6 0.01 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) dBm Attenuation -1 0 1 2 3 4 5 PWB-16-A 3 dB bandwidth 0.05 - 80 MHz 6 7 8 0.01 0.1 1 10 Frequency (MHz) 100 1000 Attenuation measured on a network analyzer (re: 50 Ohms) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2010 Document 591-3 Revised 01/04/10 Document 591-4 Type B Transformers -1 0 dBm Attenuation dBm Attenuation -1 0 1 2 3 4 5 PWB-1-B 3 dB bandwidth 0.13 - 425 MHz 6 7 8 1 2 3 4 5 7 8 0.01 0.1 1 10 100 PWB2010 3 dB bandwidth 0.0035-125 MHz 6 1000 0.001 0.01 0.1 dBm Attenuation dBm Attenuation 1 2 3 4 5 PWB-1.5-B 3 dB bandwidth 0.50 - 250 MHz 6 0.01 0.1 1 10 1 3 4 5 100 PWB2010-1 3 dB bandwidth 0.03 - 250 MHz 6 7 8 1000 0.01 0.1 1 10 100 1000 Frequency (MHz) -1 0 dBm Attenuation -1 0 dBm Attenuation 100 2 Frequency (MHz) 1 2 3 4 5 PWB-2-B 3 dB bandwidth 0.20 - 400 MHz 6 7 8 10 -1 0 -1 0 7 8 1 Frequency (MHz) Frequency (MHz) 0.01 0.1 1 10 1 2 3 4 5 7 8 100 1000 PWB2040 3 dB bandwidth 0.15 - 400 MHz 6 0.01 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) dBm Attenuation -1 0 1 2 3 4 5 PWB-4-B 3 dB bandwidth 0.14 - 700 MHz 6 7 8 0.01 0.1 1 10 100 1000 Frequency (MHz) dBm Attenuation -1 0 1 2 3 4 5 PWB-16-B 3 dB bandwidth 0.075 - 90 MHz 6 7 8 0.01 0.1 1 10 Frequency (MHz) 100 1000 Attenuation measured on a network analyzer (re: 50 Ohms) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2010 Document 591-4 Revised 01/04/10 Document 591-5 Type C Transformers -1 0 dBm Attenuation dBm Attenuation -1 0 1 2 3 4 5 PWB-1-C 3 dB bandwidth 0.10 - 300 MHz 6 7 8 0.01 0.1 1 10 100 1 2 3 4 5 7 8 1000 PWB3010 33dB - 125MHz MHz dBbandwidth bandwidth0.0035 .0035-125 6 0.001 0.01 0.1 1 2 3 4 5 PWB-1.5-C 3 dB bandwidth 0.15 - 200 MHz 6 0.01 0.1 1 10 100 1 3 4 5 PWB3010-1 33dB 250MHz MHz dBbandwidth bandwidth0.03 .03 --250 6 7 8 1000 0.01 0.1 1 dBm Attenuation dBm Attenuation 100 1000 -1 0 1 2 3 4 5 PWB-2-C 3 dB bandwidth 0.13 - 285 MHz 6 1 2 3 4 5 7 8 0.01 0.1 1 10 100 PWB3015 33dB 225MHz MHz dBbandwidth bandwidth0.07 .07 --225 6 1000 0.01 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) -1 0 dBm Attenuation -1 0 dBm Attenuation 10 Frequency (MHz) -1 0 1 2 3 4 5 PWB-4-C 3 dB bandwidth 0.14 - 50 MHz 6 7 8 100 2 Frequency (MHz) 7 8 10 -1 0 dBm Attenuation dBm Attenuation -1 0 7 8 1 Frequency (MHz) Frequency (MHz) 0.01 0.1 1 10 100 1000 1 2 3 4 5 PWB3040 33dB 400MHz MHz dBbandwidth bandwidth0.15 .15 --400 6 7 8 0.01 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) Attenuation measured on a network analyzer (re: 50 Ohms) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2010 Document 591-5 Revised 01/04/10