Qualtek 100Watts Single Output P P C Electronics Corporation QPD-100 Series Features: Universal AC input/ Full range Wide Operating Ambient Temperature (-20°C~70°C) High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test Model QPD-100-5 QPD-100-12 QPD-100-15 QPD-100-24 QPD-100-48 Output Characteristics DC Output 5V 12V 15V 24V 48V Rated Current 16A 8.5A 7A 4.5A 2.3A 0~16A 0~8.5A 0~7A 0~4.5A 0~2.3A Ripple and 0~70°C <80mV <100mV <100mV <120mV <200mV Noise -20~0°C Current Range <100mV <120mV <120mV <120mV <200mV Voltage ADJ. Range 4.7V-5.6V 11.0V-13.0V 13.7V-16.3V 22.4V-27.3V 44.4V-52.2V Voltage Accuracy ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% Set-up Time <2.0s (115VAC input, full load); <1.0s (230VAC input, full load) Hold-up Time >10ms (115VAC input, full load); >20ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics Voltage Range 90VAC~264VAC, 127VDC~370VDC Frequency Range 47Hz-63Hz Efficiency 115VAC Input 80% 80% 83% 85% 83% (Typical) 230VAC Input 80% 81% 84% 85% 84% AC Current (max) <2.5A Inrush Current (Typical) 20A@115VAC Cold start 40A@230VAC Cold start Leakage Current <0.4mA@115VAC <0.75mA@230VAC Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery Over Voltage (OVP) 110%~150% of rated output voltage, shut down, re-power on to recover Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -20°C~70°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C: 10%-95% RH Non-Condensing Safety Standards UL60950-1; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2, 3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics Rev.B MTBF (MIL-HDBK-217F) More than 200,000Hrs (25°C, Full load) Dimension (LxWxH) 160x98x38mm Packing 20PCS/CTN. G.W: 13.6kgs Cooling Method Cooling by free air convection Page 1 of 2 100Watts Single Output Qualtek Electronics Corporation P P C QPD-100 Series MECHANICAL SPECIFICATIONS Pin No. 1 2 3 4.5 6.7 Assignment AC-L AC-N F.G DC output -V DC output +V DERATING CURVE UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2