0.5mmピッチ FLT CONNECTOR Emboss Tape NON- 0.5mm pitch/Connectors for FPC Specifications ––––––––––––––––––– • Current rating: 0.5A AC, DC • Voltage rating: 50V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/50m Ω max. After environmental testing/20m Ω max. (variation from initial value) • Insulation resistance: 500M Ω min. • Withstanding voltage: 200V AC/minute • Applicable FPC: Conductor pitch/0.5mm Conductor width/0.35mm Mating part thickness/0.3±0.05mm Note: FPC to be actually used should be checked for applicability. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. • Heat resisting design suitable for surface mounting • Staggered surface mount tails • Embossed tape for automatic mounting • FPC insertion is easy • Compact design Standards –––––––––––––––––––––– 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout 1.0±0.05 0.5±0.05 2.95 1.6 0.5 Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. The dimensions above should serve as a guide line. Contact JST for details. 1 4.15 4.0 1.6 Circuit No.1 FLT CONNECTOR Connector Circuits A B Circuit No.1 0.5 1.0 C 0.15 4.0 2.95 3.4 Dimensions (mm) Model No. A B C Q'ty / reel 6 06FLT-SM2-TB 4.9 3.5 2.5 2,500 8 08FLT-SM2-TB 5.9 4.5 3.5 2,500 10 10FLT-SM2-TB 6.9 5.5 4.5 2,500 12 12FLT-SM2-TB 7.9 6.5 5.5 2,500 14 14FLT-SM2-TB 8.9 7.5 6.5 2,500 16 16FLT-SM2-TB 9.9 8.5 7.5 2,500 18 18FLT-SM2-TB 10.9 9.5 8.5 2,500 20 20FLT-SM2-TB 11.9 10.5 9.5 2,500 22 22FLT-SM2-TB 12.9 11.5 10.5 2,500 24 24FLT-SM2-TB 13.9 12.5 11.5 2,500 26 26FLT-SM2-TB 14.9 13.5 12.5 2,500 28 28FLT-SM2-TB 15.9 14.5 13.5 2,500 30 30FLT-SM2-TB 16.9 15.5 14.5 2,500 32 32FLT-SM2-TB 17.9 16.5 15.5 2,500 40 40FLT-SM2-TB 21.9 20.5 19.5 2,500 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PA 6T, UL94V-0 RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. Lead section dimensions of FPC 0.5±0.1 0.5×（N＋1）±0.05 0.5×（N−1）±0.03 0.5±0.03 0.35±0.04 0.3±0.05 （5.5） 3.0min. Reinforcing layer Note: N --- Number of circuits 2