SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green PACKAGE DIMENSIONS 0.134 (3.4) 0.118 (3.0) Ø0.094 (2.4) 3 2 4 1 0.067 (1.7 ) 0.052 (1.3) 0.091 (2.3) 0.083 (2.1) 0.118 (3.0) 0.102 (2.6) TOP 0.035 (0.9) 0.028 (0.7) 0.024 (0.6) 0.083 (2.1) 0.067 (1.7) 0.041 (1.0) 0.007 (0.18) 0.005 (0.12) SIDE 0.148 (3.7) 0.130 (3.3) 0.043 (1.1) 0.020 (0.5) BOTTOM 3 2 4 1 Green/ Yellow (-23) HER / AlGaAs Red / Yellow (-34) POLARITY APPLICATIONS • Automotive interior lighting NOTE: • Status indication for consumer electronics and office Dimensions for all drawings are in inches (mm). equipment DESCRIPTION These dual color surface mount LEDs are designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configuration conform to EIA-535 BAAC standard specification for case size 3528 tantalum capacitor. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES • Wide viewing angle of 120° • Water clear optics • Moisture-proof packaging • Available in 0.315” (8mm) width tape on 7” (178mm) diameter reel; 2,000 units per reel 2001 Fairchild Semiconductor Corporation DS300109 8/31/01 1 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green ABSOLUTE MAXIMUM RATINGS Parameter Symbol Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time (TA =25°C Unless otherwise specified) QTLP670C IF -24 30 / 30 -34 30 / 30 -74 30 / 30 IFM 160 / 160 160 / 160 160 / 160 180 / 160 mA VR PD TOPR TSTG TSOL 5 84 / 84 5 84 / 84 5 84 / 84 5 72 / 84 V mW °C °C °C Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) www.fairchildsemi.com Symbol mA -40 to +85 -40 to +90 260 for 5 sec ELECTRICAL / OPTICAL CHARACTERISTICS Parameter Units -23 30 / 30 (TA =25°C) QTLP670C Units -23 -24 -34 -74 IV 5 / 2.5 10 / 5 5 / 15 10 / 25 2.5 / 15 5 / 25 10 / 15 20 / 25 IF = 20mA VF 2.8 / 2.8 2.0 / 2.0 2.8 / 2.8 2.0 / 2.1 2.8 / 2.8 2.0 / 2.1 2.4 / 2.8 1.9 / 2.1 IF = 20mA 635 / 585 630 / 590 45 / 35 120 635 / 565 630 / 570 45 / 30 120 585 / 565 590 / 570 35 / 30 120 660 / 565 645 / 570 20 / 30 120 IF = 20mA DP DD D 201/2 2 OF 6 IF = 20mA IF = 20mA 8/31/01 DS300109 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green TYPICAL PERFORMANCE CURVES Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 2.0 90 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 80 70 HER 60 GREEN AlGaAs RED 50 YELLOW 40 30 20 10 AlGaAs RED 1.5 1.0 HER YELLOW GREEN 0.5 0.0 0 1.0 2.0 2.5 3.0 4.0 5.0 0 5 10 15 20 25 30 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) Fig. 3 Relative Intensity vs. Peak Wavelength HER GREEN YELLOW AlGaAs RED RELATIVE INTENSITY 1.0 0.5 0 300 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature Fig.4 Radiation Diagram -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ -40˚ IF - FORWARD CURRENT (mA) 50 30˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 0.2 0 0.2 0.4 0.6 0.8 1.0 20 10 0 90˚ 0 REL. LUMINOUS INTENSITY (%) 8/31/01 30 80˚ -90˚ 1.0 0.8 0.6 0.4 DS300109 40 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) 3 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.102 [2.59] 0.043 [1.09] 0.059 [1.50] 0.177 [4.50] RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX www.fairchildsemi.com 4 OF 6 8/31/01 DS300109 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 Ø62.0±0.5 +0.5 -0.0 2.5 0± 0.5 Ø180±1 5 ±0. 2.5 Ø12.75 +0.25 -0.0 2.0±0.05 4.0 3.84 4.0 Polarity 0.23 Ø1.55.±05 8.0 3.5±0.05 1.75 Progressive direction 3.12 2.24 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm DS300109 8/31/01 5 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-4 QTLP670C-23 HER/Yellow QTLP670C-24 HER/Green QTLP670C-34 Yellow/Green QTLP670C-74 AlGaAs Red/Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 6 OF 6 8/31/01 DS300109