SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue PACKAGE DIMENSIONS 0.130 (3.3) 0.114 (2.9) Ø0.094 [Ø2.4] 0.118 (3.0) 0.102 (2.6) 0.091 (2.3) 0.083 (2.1) TOP CATHODE 0.024 (0.6) 0.016 (0.4) 0.083 (2.1) 0.067 (1.7) 0.006 (0.15) 0.146 (3.7) 0.130 (3.3) SIDE CATHODE 0.032 (0.8) BOTTOM POLARITY APPLICATIONS NOTE: • Automotive interior lighting • Status indication for consumer electronics and office Dimensions for all drawings are in inches (mm). equipment DESCRIPTION These surface mount LEDs are designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configuration conform to EIA-535 BAAC standard specification for case size 3528 tantalum capacitor. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES • AllnGaP technology for -T, -S, -R, -E, -O, -Y and -AG • Water clear optics • InGaN/SiC technology for -IG, -IB and -IW • Available in 0.315” (8mm) width tape on • Wide viewing angle of 120° 2001 Fairchild Semiconductor Corporation DS300236 8/31/01 7” (178mm) diameter reel; 2,000 units per reel 1 OF 8 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage (IR = 10 µA) Power Dissipation Junction Temperature Thermal Resistance (Junction-Air) Operating Temperature Storage Temperature Lead Soldering Time Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage (IR = 10 µA) Power Dissipation Junction Temperature Thermal Resistance Junction-Air Operating Temperature Storage Temperature Lead Soldering Time www.fairchildsemi.com (TA =25°C Unless otherwise specified) IF -T 30 -S 30 -R 30 QTLP670C -E 30 IFM 160 160 160 160 VR PD TJ Rth JA TOPR TSTG TSOL 5 72 100 500 5 72 100 500 5 72 100 500 Symbol ABSOLUTE MAXIMUM RATINGS QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue Units -O 30 -Y 25 -AG 30 160 120 160 mA 5 5 72 72 100 100 500 500 -40 to +95 -40 to +100 260 for 5 sec 5 60 100 500 5 72 100 500 V mW °C K/W °C °C °C mA (TA =25°C Unless otherwise specified) -IB QTLP670C -IG -IW IF 30 30 20 mA IFM 100 100 70 mA VR PD TJ Rth JA TOPR TSTG TSOL 5 120 125 400 5 120 125 400 -40 to +95 -40 to +100 260 for 5 sec 5 80 125 400 V mW °C K/W °C °C °C Symbol 2 OF 8 Units 8/31/01 DS300236 SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Chromaticity Coordinate Spectral Line Half Width (nm) Viewing Angle (°) DS300236 8/31/01 (TA =25°C) -T -S QTLP670C -R -E IV 20 45 25 65 25 65 25 65 25 65 25 65 15 30 IF = 20mA VF 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 IF = 20mA 650 640 20 120 640 632 20 120 630 624 20 120 620 615 18 120 610 605 18 120 590 589 15 120 575 573 20 120 IF = 20mA Symbol DP DD D 201/2 ELECTRICAL / OPTICAL CHARACTERISTICS Part Number QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue Symbol -O -Y -AG Condition IF = 20mA IF = 20mA (TA =25°C) -IB QTLP670C -IG -IW Condition IV 30 60 75 115 100 250 IF = 20mA VF 4.0 3.5 4.0 3.5 4.0 3.5 IF = 20mA 465 470 — 25 120 520 525 — 35 120 — — x = 0.30, y = 0.31 — 120 IF = 20mA DP DD x,y D 201/2 3 OF 8 IF = 20mA IF = 20mA IF = 20mA www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue TYPICAL PERFORMANCE CURVES (QTLP670C-T, -S, -R, -E, -O, -Y and -AG) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 100 90 80 70 60 50 40 30 20 10 0 1.0 1.5 2.0 2.5 2.0 1.5 1.0 0.5 0.0 3.0 0 VF - FORWARD VOLTAGE (V) 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength AG RELATIVE INTENSITY 1.0 Y O E R S T 0.5 0 500 550 600 650 700 WAVELENGTH (nm) -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ -40˚ Fig.5 Maximum Forward Current vs. Ambient Temperature IF - FORWARD CURRENT (mA) Fig.4 Radiation Diagram 30˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 80˚ -90˚ 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 90˚ 40 T, S, R, E, O and AG 30 Y 20 10 0 0 25 50 75 100 AMBIENT TEMPERATURE TA (˚C) REL. LUMINOUS INTENSITY (%) www.fairchildsemi.com 50 4 OF 8 8/31/01 DS300236 SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue TYPICAL PERFORMANCE CURVES (QTLP670C-IG, -IB and -IW) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 100 90 80 70 60 50 IG 40 IB and IW 30 20 10 0 2.0 2.5 3.0 3.5 4.0 4.5 2.0 1.5 1.0 0.5 0.0 5.0 0 VF - FORWARD VOLTAGE (V) 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength IW IG RELATIVE INTENSITY 1.0 0.5 0 400 450 500 IB 550 0˚ 10˚ 20˚ -40˚ Fig.5 Maximum Forward Current vs. Ambient Temperature IF - FORWARD CURRENT (mA) -20˚ -10˚ 30˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 80˚ -90˚ 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 90˚ 8/31/01 50 40 IB IG 30 IW 20 10 0 0 25 50 75 100 AMBIENT TEMPERATURE TA (˚C) REL. LUMINOUS INTENSITY (%) DS300236 650 WAVELENGTH (nm) Fig.4 Radiation Diagram -30˚ 600 5 OF 8 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.063 [1.60] 0.095 [2.41] 0.071 [1.80] 2X RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX -5° C/s MAX +5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX www.fairchildsemi.com 6 OF 8 8/31/01 DS300236 SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 Ø62.0±0.5 +0.5 -0.0 2.5 0± 0.5 Ø180±1 5 ±0. 2.5 Ø12.75 +0.25 -0.0 2.0±0.05 4.0 3.84 4.0 Polarity 0.23 Ø1.55.±05 8.0 3.5±0.05 1.75 Progressive direction 3.12 2.24 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm DS300236 8/31/01 7 OF 8 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-2 QTLP670C-T Red QTLP670C-E Orange QTLP670C-AG Yellow-Green QTLP670C-IW White QTLP670C-S Red QTLP670C-O Yellow-Orange QTLP670C-IG True Green QTLP670C-R Red QTLP670C-Y Yellow QTLP670C-IB Blue DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 8 OF 8 8/31/01 DS300236