RD74LVC08B Quad. 2-input AND Gates REJ03D0221–0100Z Rev.1.00 May 11, 2004 Description The RD74LVC08B has four 2-input AND gates in a 14 pin package. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • VCC = 1.65 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±4 mA (@VCC = 1.65 V) ±8 mA (@VCC = 2.3 V) ±12 mA (@VCC = 2.7 V) ±24 mA (@VCC = 3.0 V to 5.5 V) • Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) RD74LVC08BFPEL SOP–14 pin (JEITA) FP–14DAV FP EL (2,000 pcs/reel) RD74LVC08BTELL TSSOP–14 pin T ELL (2,000 pcs/reel) TTP–14DV Function Table Inputs A Output Y B L L L H L L L H L H H H H: High level L: Low level Rev.1.00, May 11, 2004, page 1 of 7 RD74LVC08B Pin Arrangement 14 VCC 1A 1 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Conditions Supply voltage range VCC –0.5 to 7.0 V Input diode current IIK –50 mA Input voltage VI –0.5 to 7.0 V Output diode current IOK –50 mA VO = –0.5 V 50 mA VO = VCC+0.5 V Output voltage VO –0.5 to VCC+0.5 V Output current IO ±50 mA VCC, GND current / pin ICC or IGND 100 mA Storage temperature Tstg –65 to +150 °C VI = –0.5 V Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.1.00, May 11, 2004, page 2 of 7 RD74LVC08B Recommended Operating Conditions Item Supply voltage Symbol VCC Ratings 1.5 to 5.5 Unit V 1.65 to 5.5 Input / Output voltage VI 0 to 5.5 0 to VCC Operating temperature Ta –40 to 85 °C Output current IOH –4 mA *1 Input rise / fall time tr, tf V A, B Y VCC = 1.65 V –8 VCC = 2.3 V –12 VCC = 2.7 V –24 VCC = 3.0 V to 5.5 V 4 VCC = 1.65 V 8 VCC = 2.3 V 12 VCC = 2.7 V 24 VCC = 3.0 V to 5.5 V 20 10 Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Rev.1.00, May 11, 2004, page 3 of 7 Data hold At operation VO IOL Conditions ns/V VCC = 1.65 V to 2.7 V VCC = 3.0 V to 5.5 V RD74LVC08B Electrical Characteristics Ta = –40 to 85°C Item Input voltage Symbol VIH VIL Output voltage VOH VOL VCC (V) Min Unit Max Test Conditions 1.65 to 1.95 VCC×0.65 — 2.3 to 2.7 1.7 — 2.7 to 3.6 2.0 — 4.5 to 5.5 VCC×0.7 — 1.65 to 1.95 — VCC×0.35 2.3 to 2.7 — 0.7 2.7 to 3.6 — 0.8 4.5 to 5.5 — VCC×0.3 1.65 to 5.5 VCC–0.2 — 1.65 1.2 — IOH = –4 mA 2.3 1.7 — IOH = –8 mA 2.7 2.2 — IOH = –12 mA 3.0 2.4 — 3.0 2.2 — 4.5 3.8 — V V IOH = –100 µA IOH = –24 mA 1.65 to 5.5 — 0.2 IOL = 100 µA 1.65 — 0.45 IOL = 4 mA 2.3 — 0.7 IOL = 8 mA 2.7 — 0.4 IOL = 12 mA 3.0 — 0.55 IOL = 24 mA 4.5 — 0.55 Input current IIN 0 to 5.5 — ±5.0 µA VIN = 5.5 V or GND Quiescent supply current ICC 2.7 to 3.6 — ±5.0 µA VIN = 3.6 V to 5.5 V ∆ICC Rev.1.00, May 11, 2004, page 4 of 7 2.7 to 5.5 — 5.0 VIN = VCC or GND 2.7 to 3.6 — 500 VIN = one input at (VCC–0.6)V, other inputs at VCC or GND RD74LVC08B Switching Characteristics Ta = –40 to 85°C Item Symbol Propagation delay time 1 Between output pins skew* Input capacitance Note: VCC (V) Min Typ tPLH 1.8±0.15 1.0 — 9.8 tPHL 2.5±0.2 1.0 — 6.9 2.7 1.0 — 4.8 3.3±0.3 1.0 — 4.1 5.0±0.5 1.0 — 3.5 tOSLH 1.8±0.15 — — — tOSHL 2.5±0.2 — — — 2.7 — — — 3.3±0.3 — — 1.0 5.0±0.5 — — 1.0 3.3 — 5.0 — CIN Unit Max ns From To (Input) (Output) A or B Y ns pF 1. This parameter is characterized but not tested. tOSLH = |tPLHm – tPLHn|, tOSHL = |tPHLm – tPHLn| Operating Characteristics Ta = 25°C Item Power dissipation Capacitance Symbol CPD Rev.1.00, May 11, 2004, page 5 of 7 VCC (V) Min Typ Max 1.8 — 10 — 2.5 — 12 — 3.3 — 12 — 5.0 — 15 — Unit pF Test conditions f = 10 MHz RD74LVC08B Test Circuit Input VCC VCC Pulse Generator Output Zout = 50 Ω RL CL Note: 1. CL includes probe and jig capacitance. Waveforms tr Input A or B tf 90 % Vref VIH 90 % Vref 10 % 10 % GND t PHL t PLH VOH Output Y Vref Vref VOL INPUTS Note: VCC (V) VIH tr/tf VCC = 1.8±0.15 V VCC ≤ 2 ns 1/2 VCC 30 pF 1.0 kΩ VCC = 2.5±0.2 V VCC ≤ 2 ns 1/2 VCC 30 pF 500 Ω CL RL VCC = 2.7 V 2.7 V ≤ 2.5 ns 1.5 V 50 pF 500 Ω VCC = 3.3±0.3 V 2.7 V ≤ 2.5 ns 1.5 V 50 pF 500 Ω VCC = 5.0±0.5 V VCC ≤ 2.5 ns 1/2 VCC 50 pF 500 Ω 1. Input waveform : PRR = 10 MHz, duty cycle 50%. Rev.1.00, May 11, 2004, page 6 of 7 Vref RD74LVC08B Package Dimensions As of January, 2003 Unit: mm 10.06 10.5 Max 8 5.5 14 1 2.20 Max *0.20 ± 0.05 7 1.42 Max *0.40 ± 0.06 1.15 0˚ – 8˚ 0.10 ± 0.10 1.27 0.20 7.80 +– 0.30 0.70 ± 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Ni/Pd/Au plating FP-14DAV — Conforms 0.23 g As of January, 2003 Unit: mm 4.40 5.00 5.30 Max 14 8 1 7 0.65 1.0 *0.20 ± 0.05 0.13 M 6.40 ± 0.20 *Ni/Pd/Au plating Rev.1.00, May 11, 2004, page 7 of 7 0.07 +0.03 –0.04 0.10 *0.15 ± 0.05 1.10 Max 0.83 Max 0˚ – 8˚ 0.50 ± 0.10 Package Code JEDEC JEITA Mass (reference value) TTP-14DV — — 0.05 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0