Remote Digital Display RDD100 The RDD100 Remote Digital Display is a convenient, compact, and inexpensive accessory for displaying the serial digital output from Honeywell’s Precision Pressure Transducers. PPT, PPTR, HPB or HPA pressure readings are displayed by the RDD100 at distances up to 50 feet. Digital readings for any of the transducer’s 14 user-selectable pressure units, or custom user-specified unit, can be displayed. Application ¾ Displays Honeywell Precision Pressure Transducer serial digital output ¾ Compatible with RS-232 digital output from Honeywell’s PPT, PPTR, HPB and HPA transducers ¾ Bench top or panel mount installation ISO-9001 ISO-14001 FEATURES AND BENEFITS 4 Direct Output 4 The RDD100 collects and displays a continuous stream of RS- 4 Accurate 4 Easy to Use 4 Fast Setup 4 No additional hardware or wiring required. 4 Computer Interface 4 Single 9-pin “D” cable connects the RDD100-transducer 232 digital data directly from a PPT, PPTR, HPB, or HPA transducer. (9600 Baud). 4 No loss of accuracy as a result of signal conversion in the display. 4 Simple setup; factory supplied interface cables; single wall mount power supply provides power for both the RDD100 and pressure transducer. combination to your computer’s serial port allowing background data collection while observing pressure transducer output. Configuring the update rate, damping, and other parameters can also be accomplished via the computer link. RDD100 SPECIFICATIONS Power Requirements Voltage Current Power Connection Display Type Polarity Indication Environmental Operating Temperature Range Storage Temperature Range Relative Humidity Environmental Ruggedness Dimensions/Weight Overall Panel Cutout Depth behind panel Weight 12 ±3 VDC ( From supplied wall-mount AC/DC converter) < 250 mA (combined RDD100 and transducer) 2.5 x 5.5 x 10 mm (ID x OD x length) – center negative 6 digit, 7 segment LED 0.56 inches (14.3mm) “-” Displayed -20°C to +60°C (-4 to 140°F) -25°C to +85°C (-13 to 185°F) 0% to 90%, non-condensing Acid and abrasion resistant lens. NEMA 4 rated bezel with panel gasket seal 3.8 x 2.0 x 4.36 inches (9.7 x 5.1 x 12.31 cm) 3.58 x 1.77 inches (9.1 x 4.5 cm) 4.5 inches (11.4 cm) – not including cabling 9.5 oz. (269 gm) ORDERING INFORMATION RDD100 Remote Digital Display CABLE TYPE (Connection between RDD100 and unit) A PPT, HPB, HPA (Non-CE Mark, plastic connector, RS-232 only) B PPT, HPB, HPA, PPTR (CE Mark, metal connector, RS-232 only) OPTIONS 6 6-Foot Computer Cable (Connection between RDD100 and Computer) 10 10-Foot Computer Cable (Connection between RDD100 and Computer) B Set of mating connectors for building custom length cables Example: RDD100 A -6 Orders for RDD100 contain display, 6 ft. transducer cable (for connection between RDD100 and transducer), and 120V AC to 12V DC power converter. 6-foot and 10-foot computer cables (for connection between RDD100 and computer) are available as options. RDD100 communicates via RS-232 digital output only. Find out more For more information on Honeywell’s Precision Pressure Transducers visit us online at www.pressuresensing.com or contact us at 800-323-8295 or 763-954-2474. Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. Honeywell 12001 Highway 55 Plymouth, MN 55441 Tel: 800-323-8295 www.honeywell.com/pressuresensing Form #900213 May 2006 ©2006 Honeywell International Inc.