Features Regulated Converters ● ● ● ● ● ● ● ● ● ● POWERLINE 2:1 Wide Input Voltage Range Safety standards and approvals: EN 60950 certified, rated for 250VAC (LVD test report) 3 Watts Regulated Output Power 500VDC Isolation Over Current Protection Also Available with Isolated Outputs, Output 1/Output 2 (DS) Isolation Five-Sided Shield Standard DIP24 and SMD-Pinning UL 1950 Component Recognized High Efficiency to 80% DC/DC-Converter RP03-S_DB (DB/DS) Series Selection Guide 12V, 24V and 48V Input Types Part Number Input Range mA % Capacitive(6) Load max. V1 & V2 µF 196 74 2200 500 286 77 1000 250 333 79 220 for DB/DS(V1 & V2) DIP24 (SMD) VDC Output Voltage V1 & V2 VDC Output Current V1 & V2 mA RP03-123.3SB** 9-18 3.3 500 RP03-1205SB** 9-18 5 RP03-1212SB** 9-18 12 Input (4) Efficiency(5) Current RP03-1215SB** 9-18 15 200 329 80 150 RP03-243.3SB** 18-36 3.3 500 101 72 2200 RP03-2405SB** 18-36 5 500 149 74 1000 RP03-2412SB** 18-36 12 250 169 78 220 RP03-2415SB** 18-36 15 200 169 78 150 RP03-483.3SB** 36-75 3.3 500 50 73 2200 RP03-4805SB** 36-75 5 500 75 74 1000 RP03-4812SB** 36-75 12 250 84 79 220 RP03-4815SB** 36-75 15 200 84 79 150 RP03-1205DB** 9-18 ±5 ±250 293 75 ±470 RP03-1212DB** 9-18 ±12 ±125 329 80 ±100 RP03-1215DB** 9-18 ±15 ±100 329 80 ±68 RP03-2405DB** 18-36 ±5 ±250 147 75 ±470 RP03-2412DB** 18-36 ±12 ±125 169 78 ±100 RP03-2415DB** 18-36 ±15 ±100 169 78 ±68 RP03-4805DB** 36-75 ±5 ±250 75 74 ±470 RP03-4812DB** 36-75 ±12 ±125 86 77 ±100 RP03-4815DB** 36-75 ±15 ±100 169 77 ±68 RP03-1205DB/DS** 9-18 5/5 250 / 250 293 75 470 / 470 RP03-1212DB/DS** 9-18 12 / 12 125 / 125 329 80 100 / 100 RP03-1215DB/DS** 9-18 15 / 15 100 / 100 329 80 68 / 68 RP03-2405DB/DS** 18-36 5/5 250 / 250 147 75 470 / 470 RP03-2412DB/DS** 18-36 12 / 12 125 / 125 169 78 100 / 100 RP03-2415DB/DS** 18-36 15 / 15 100 / 100 169 78 68 / 68 RP03-4805DB/DS** 36-75 5/5 250 / 250 75 74 470 / 470 RP03-4812DB/DS** 36-75 12 / 12 125 / 125 86 77 100 / 100 RP03-4815DB/DS** 36-75 15 / 15 100 / 100 86 77 68 / 68 3 Watt DIP24 & SMD, Single, Dual & Dual Isolated Output ** add Suffix SMD for SMD package Description The B-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards (8). 170 April-2005 www.recom-international.com POWERLINE RP03-S_DB (DB/DS) Series DC/DC-Converter Derating-Graph (Ambient Temperature) RP03-4805SB/M1 RP03-4805SB 125 125 100 100 75 Natural Convection 50 Output Power (%) Output Power (%) 75 25 0 -25 Natural Convection 50 25 -10 0 50 60 70 80 90 100 75 Ambient Temperature Range (°C) 0 -40 -25 -10 0 50 60 70 80 90 100 85 Ambient Temperature Range (°C) Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 12V nominal input 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) Pi Type 12V Input 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) 36VDC 50VDC 100VDC 20mAp-p Start Up Time (nominal Vin and constant resistor load) 350ms typ. Output Power 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) 9-18VDC 18-36VDC 36-75VDC ±0.2% Single Dual at DS Cross Regulation (asymmetrical load 25%/100% FL) ±0.2% ±1% ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 200µS Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table continued on next page www.recom-international.com April-2005 171 POWERLINE RP03-S_DB (DB/DS) Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Isolation Voltage In to out I/O to case Output to Output DIP at SMD type /DS type 500VDC min. 500VDC min. 500VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 300kHz typ. Approved to Safety Standards Operating Temperature Range UL 1950, EN60950 Standard M1 (see note 3) -25°C to +85°C (with derating) -40°C to +85°C (non-derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection Thermal Shock 20°C/Watt MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Weight DIP SMD 16g 18g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.069 x 106 Hours MTBF (see note 2) Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. Should an O/O isolation be required, please order the converter with the following part number: RP03-XXXXDB/DS. 8. The “M1” version (RP03-xxxxSB-M1 / RP03-xxxxDB-M1) and the dual-isolated-output-version (RP03-xxxxDS) do not carry the UL certification. 9. See application notes for EMI-filtering. 172 April-2005 www.recom-international.com POWERLINE RP03-S_DB (DB/DS) Series DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 2.54 15.20 SMD Pin Connections out in 22.90 Pin # 1 +Vin 2 NC 3 NC 10 –Vout 11 +Vout 12 –Vin 13 –Vin 14 +Vout 15 –Vout 22 NC 23 NC 24 +Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 10 11 12 1 2 3 Bottom View 15 14 13 24 23 22 Single Dual +Vin –Vout Com Com +Vout –Vin –Vin +Vout Com Com –Vout +Vin Dual Separated Outputs +Vin –V1 out +V1 out –V2 out +V2 out –Vin –Vin +V2 out –V2 out +V1 out –V1 out +Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 SMD Pin Connections out in Pin # Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 Top View 1 27.94 Single 1 +Vin 2 NC 3 NC 10 –Vout 11 +Vout 12 –Vin 13 –Vin 14 +Vout 15 –Vout 22 NC 23 NC 24 +Vin Others NC NC = No Connection Dual +Vin –Vout Com Com +Vout –Vin –Vin +Vout Com Com –Vout +Vin NC Dual Separated Outputs +Vin –V1 out +V1 out –V2 out +V2 out –Vin –Vin +V2 out –V2 out +V1 out –V1 out +Vin NC Pin Pitch Tolerance ±0.35 mm www.recom-international.com April-2005 173