Features ● ● ● ● ● ● ● ● ● Regulated Converters Description POWERLINE 2:1 Wide Input Voltage Range 8 Watts Regulated Output Power 1.6kVDC Isolation ULCertified Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield Standard DIP24 and SMD-Pinning Efficiency to 87 % DC/DC-Converter with 3 year Warranty 8 Watt DIP24/SMD Single & Dual Output The RP08-A series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. Selection Guide Input Range VDC Output Voltage VDC Output Current mA Input (4) Current mA RP08-123.3SA** 9-18 3.3 2000 724 80 3300µF RP08-1205SA** 9-18 5 1500 801 83 1600µF RP08-1212SA** 9-18 12 666 833 88 350µF RP08-1215SA** 9-18 15 533 843 87 240µF RP08-243.3SA** 18-36 3.3 2000 362 80 3300µF RP08-2405SA** 18-36 5 1500 396 83 1600µF RP08-2412SA** 18-36 12 666 416 86 350µF RP08-2415SA** 18-36 15 533 416 85 240µF RP08-483.3SA** 36-75 3.3 2000 181 80 3300µF RP08-4805SA** 36-75 5 1500 198 83 1600µF RP08-4812SA** 36-75 12 666 208 86 350µF RP08-4815SA** 36-75 15 533 208 86 240µF RP08-1205DA** 9-18 ±5 ±800 843 83 ±1000µF Derating-Graph RP08-1212DA** 9-18 ±12 ±333 833 87 ±160µF (Ambient Temperature) RP08-1215DA** 9-18 ±15 ±267 834 85 ±100µF RP08-2405DA** 18-36 ±5 ±800 427 82 ±1000µF RP08-2412DA** 18-36 ±12 ±333 422 86 ±160µF RP08-2415DA** 18-36 ±15 ±267 411 85 ±100µF RP08-4805DA** 36-75 ±5 ±800 211 85 ±1000µF RP08-4812DA** 36-75 ±12 ±333 206 87 ±160µF RP08-4815DA** 36-75 ±15 ±267 206 87 ±100µF DIP24 (SMD) Efficiency (5) Capacitive(6) Load max. % RoHS 2011/65/EU 6/6 UL-60950-1 Certified E196683 RP08 RP08-4805SA 125 100 75 Output Power (%) Part Number 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (°C) 65 ** add Suffix SMD for SMD package Derating graphs are valid only for the shown part numbers. If you need detailed deratinginformation about a part-number not shown here please contact our technical support service at [email protected] Refer to Application Notes www.recom-power.com REV: 0/2015 P-1 RP08-S_DA Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range (3) 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (7) Remote OFF input current 600ms typ. DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Nominal input Output Power 8W max. Output Voltage Accuracy (full Load and nominal Vin) Minimum Load ±2% (1) 10% of full load Line Regulation (low line, high line at full load) Load Regulation (25% to 100% full load) ±0.2% Single Dual Cross Regulation (asymmetrical 25%<>100% load) ±0.5% ±1% ±5% Ripple and Noise (20MHz bandwidth, with 1µF MLCC on output) 50mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) RP08 2.5mA 200µs Over Load Protection (% of full load at nominal Vin) 150% typ Undervoltage Lockout none Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage In to out 1600VDC (rated for one minute) I/O to case DIP type 1600VDC I/O to case SMD type 1000VDC Isolation Resistance 1 GΩ min. Isolation Capacitance 300pF max. Operating Frequency 100kHz min. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -40°C to +85°C(with derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +125°C Thermal Impedance Natural convection Thermal Shock 20°C/Watt MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH continued on next page P-2 REV: 0/2015 www.recom-power.com RP08-S_DA Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Conducted Emissions Epoxy (UL94-V0) (8) EN55022 Level A Radiated Emissions EN55022 ESD EN61000-4-2 Perf. Criteria B Level A Radiated Immunity EN61000-4-3 Perf. Criteria B Fast Transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted Immunity EN61000-4-6 Perf. Criteria B Weight DIP 16g SMD 18g Packing Quantity Refer to App Notes for tube dimensions Dimensions DIP 31.8 x 20.3 x 10.2mm SMD 32.0 x 20.3 x 10.9mm MTBF 7 pcs per Tube 3165 x 103 hours (2) Notes: www.recom-power.com REV: 0/2015 P-3 RP08 1. The RP08 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Start up voltage : 10VDC 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input. 8. Vin=12V, fit a 4.7µF 1210 MLCC capacitor across the input pins to meet EN55022 Class A. 24V and 48V Types meet Class A without external components See application notes for Class B Filter suggestion. RP08-S_DA Series POWERLINE DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 31.80 20.30 10.20 3.8 2 5.10 20.30 15.20 Pin Connections Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 2.54 9 11 16 14 1 2 3 Bottom View 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance ±0.35 mm RP08 SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 Pin Connections 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 11 x 2.54 16 15 14 13 Top View 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. P-4 REV: 0/2015 www.recom-power.com