DDR SDRAM Terminator Technical Data Sheet RoHS Compliant Parts Available Description Features This SSTL_2 terminator network provides high performance resistor termination for SSTL_2 Class I or Class II systems. • • • • • • • Designed with a ceramic substrate, this device minimizes channel capacitance, a primary cause of reduced system performance. In addition, the BGA package eases routing design, saving the designer many hours of printed circuit layout. The BGA packaging has been proven to reduce rework and improve reliability. 18 Bit SSTL_2 Termination Sets Compliant to JEDEC Std. 8-9A Excellent high frequency performance Slim BGA Package 1% Resistor Tolerance Low Channel Capacitance RoHS Compliant Designs Available • Compatible with both lead and lead-free manufacturing processes 4 3 R1 2 R2 1 3 R1 2 2 R1 1 A B C D E F G H J R1 1 A B Style H C D E F G H J A B C D Style F Electrical Specifications Resistor Tolerance: TCR Operating Temperature Range Maximum Resistor Power: Maximum Package Power: Process Requirements: Maximum Re-flow Temperature R1 3 E F G H J Style C Typical Application ± 1.0% ±200ppm/°C -55°C to +125°C 0.05 Watts at 70°C 1.0 Watts at 70°C VTT Memory Controller DIMM Per IPC/JEDEC J-STD-020C RT2400 VTT Ordering Information Packaging Information 1.27mm Pitch 1.00mm Pitch Style R1 Ω R2 Ω Array 1.27mm Pitch 1.00mm Pitch Size RoHS Part No. RoHS Part No. Standard Part Standard No. Part No. RT1400B6* RT1400B7* H 50 25 3 x 9 RT2400B6* RT2400B7* RT1401B6 RT1401B7 H 25 22 3 x 9 RT2401B6 RT2401B7 RT1402B6* RT1402B7* F 50 3 x 9 RT2402B6* RT2402B7* RT1403B6* RT1403B7* F 25 3 x 9 RT2403B6* RT2403B7* RT1404B6* RT1404B7* C 25 4 x 9 RT2404B6* RT2404B7* RT1405B6* RT1405B7* C 22 4 x 9 RT2405B6* RT2405B7* RT1407B6* RT1407B7* F 35 3 x 9 RT2407B6* RT2407B7* RT1408B6* RT1408B7* H 60 25 3 x 9 RT2408B6* RT2408B7* RT1430B6 RT1430B7 F 60 3 x 9 RT2430B6 RT2430B7 RT1432B6 RT1432B7 F 120 3 x 9 RT2432B6 RT2432B7 RT1460B6 RT1460B7 C 50 4 x 9 RT2460B6 RT2460B7 RT1463B6* RT1463B7 C 33 4 x 9 RT2463B6* RT2463B7 RT1465B6 RT1465B7 C 47 4 x 9 RT2465B6 RT2465B7 RT1467B6* RT1467B7* F 75 3 x 9 RT2467B6* RT2467B7* RT1468B6* RT1468B7* F 150 3 x 9 RT2468B6* RT2468B7* *Indicates available Top Probe-able part numbers. Refer to the following link for detailed Top Side Probe-able information: www.ctscorp.com/components/clearone/TopProveClearOne.pdf CTS Electronic Components www.ctscorp.com Suffix Tape Width Carrier Pitch Reel Diameter Parts/Reel © 2006 CTS Corporation. All rights reserved. Information subject to change. Page 1 DDR SDRAM Terminator TR7 TR13 24 mm 8 mm 7 inch 1,000 24mm 8 mm 13 inch 4,000 Part Number Coding 7 inch reel, Add TR7 to part number, example RT2400B6TR7 13 inch reel, Add TR13 to part number, example RT2400B6TR13 (Bulk packaging is not available) Direction of Feed July 06 BGA Routing Scheme Recommended Land Pattern Outline of Substrate RT2404B6 1.27 mm Pitch Package RT2402B6 .010" Trace Width to VTT Island .005 Inch Wide Traces Solder Mask Dia = Pad Diameter +.15mm (.006 inch) PCB Pad Diameter 1.00mm Pitch (B7) = 0.51mm/.020 inch (minimum) 1.27mm pitch (B6) = 0.64mm/.025 inch (minimum) For .006" Thick Solder Paste Stencil, Aperture Opening Should be Equal to the PCB Pad Diameter. RT2404B7 1.00 mm Pitch Package RT2402B7 .008" Trace Width to VTT Island Refer to www.ctscorp.com/components/clearone.asp for additional PCB design information .005 Inch Wide Traces Mechanical Diagrams L W H RT_40_B_ CTS YRWK A1 Identifier P (Pitch) K P (Pitch) 1.27mm Pitch mm Styles H&F inch 1.0mm Pitch mm inch Styles H&F L 11.43±0.15 .450±.006 L 9.00±0.15 .354±.006 D W 3.81±0.15 .150±.006 W 3.00±0.15 .118±.006 L W H 1.32±0.15 .052±.006 H 1.19±0.15 .047±.006 P 1.27±0.25 .050±.010 P 1.00±0.25 .039±.010 D 0.76±0.05 .030±.002 D 0.64±0.05 .025±.002 K 0.64±0.25 .025±.010 K 0.50±0.25 .020±.010 H RT_40_B_ CTS YRWK P (Pitch) A1 Identifier K 1.27mm Pitch mm Style C inch 1.0mm Pitch mm Style C inch P (Pitch) L 11.43±0.15 .450±.006 L 9.00±0.15 .354±.006 CTS Electronic Components www.ctscorp.com D W 5.08±0.15 .200±.006 W 4.00±0.15 .157±.006 H 1.32±0.15 .052±.006 H 1.19±0.15 .047±.006 P 1.27±0.25 .050±.010 P 1.00±0.25 .039±.010 D 0.76±0.05 .030±.002 D 0.64±0.05 .025±.002 K 0.64±0.25 .025±.010 K 0.50±0.25 .020±.010 © 2006 CTS Corporation. All rights reserved. Information subject to change. Page 2 DDR SDRAM Terminator July 06 Applications VTT = 0.5V x VDDQ SSTL_2 Class I, symmetrically single parallel terminated output load, and series resistor. RT = 50 ohms 1/18 RT2402 VIN RS = 25 ohms 1/18 RT2404 SSTL_2 Vout VREF = 0.5V x V DDQ VTT = 0.5V x VDDQ SSTL_2 Class II, symmetrically double parallel terminated output load, and series resistor. RT2 = 50 ohms 1/18 RT2402 VIN RS = 25 ohms 1/9 RT2400(R2) SSTL_2 Vout RT1 = 50 ohms 1/9 RT2400(R1) VTT = 0.5V x VDDQ VREF = 0.5V x V DDQ VTT = 0.5V x VDDQ SSTL_2 Class I, symmetrically double parallel terminated output. RT = 50 ohms 1/18 RT2402 VIN SSTL_2 Vout RT = 50 ohms 1/18 RT2402 VTT = 0.5V x VDDQ VREF = 0.5V x VDDQ DDR SDRAM SSTL_2 Single ith End Termination. Memory Controller DIMM DIMM DIMM DIMM VTT RT2404 RT2402 D0 D15 UDQS LDQS VTT Complete ClearONE Product, Processing, and Application Information can be found at the following link: http://www.ctscorp.com/components/clearone.asp This product is covered by one or more of the following U.S. and foreign patents: US 5,977,863; TW 133,148; US 6,005,777; US 6,194,979; TW 89104035; US 6,097,277; US 6,246,312; US 6,749,775; US 6,577,225; US 6,963,265; US 6,897,761; US 6,882,266; US 6,946,733; US 6,856,516. Other U.S. and foreign patents pending. CTS Electronic Components www.ctscorp.com © 2006 CTS Corporation. All rights reserved. Information subject to change. Page 3 DDR SDRAM Terminator July 06