GaN-SiC Pallet Amplifier RTP26020-10 Product Features Application • Doherty amplifier design • GaN on SiC HEMT • Small and light weight • 50 Ohm Input/Output impedance matched • Highly reliable and rugged design • High efficiency • 16W typical PAVG • WiMAX DPD amplifier • General purpose RF amplifier Description The RTP26020-10 is designed for RF system application frequencies from 2496MHz to 2690MHz. This Pallet Amplifier uses GaN on SiC HEMT technology which performs high breakdown voltage, high linearity, high efficiency. The RTP26020-10 is DPD application amplifier. Electrical Specifications @ VDD=+30VDC, T=25°C, 50Ω System PARAMETER Symbol Min Typ Max Unit Frequency Range BW 2496 - 2690 MHz Output Power PAVG - 16 20 Watt Output Power @ Psat G.C.P Psat - 100 - Watt Small Signal Gain SSG 20 25 - dB Small Signal Gain Flatness ΔG - ± 1.0 ±2 dB Gain Variation ΔGt ± 3.0 dB ACLR @ WiMAX 10MHz 2FA ACLR -25dBr dBr Input VSWR S11 - 1.5:1 2.0:1 - Operating Voltage VDC 28 30 - Volt Efficiency @ Pout 10Watt E 30 % ※ Test Signal Condition : WCDMA 4FA Environmental Characteristics PARAMETER Symbol Min Typ Max Unit Operating Temperature Tc -20 - +50 °C Storage Temperature Ts -30 - +60 °C Mechanical Specifications PARAMETER Value Units Limits Dimensions ( L x W x H ) 105 x 60 x 18.5 mm Max Cooling External Heat sink + airflow ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 0.1 GaN-SiC Pallet Amplifier RTP26020-10 RF Interface Connectors Pin # Description Specifications 1 RF IN RF Input signal from TRx B’d 2 RF OUT RF Output signal to TDD switch Outline Drawing RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 0.1