TOCOS RV30YNME20C103K

TOCOS
®
RV30 Series
PA N E L C O N T R O L S
30mm Diameter, Single-Turn, Carbon Industrial Panel Controls
RV30YN
RV30YD
RV30YNME
Features
30mm diameter, single-turn industrial panel controls Carbon film element Linear or audio tapers
Single, tandem and triple units, single shaft; dual unit, dual shaft SPST or SPDT switch with 1A or 3A rating
Shaft lock models Metal shaft and bushing Panel mount only Right angle ear-lug terminals
6mm diameter shafts in slot, flat or round end styles Standard 15mm or 20mm shaft length
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . B = 100Ω to 2MΩ
A,C = 1kΩ to 2MΩ
Resistance Tolerance . . . . . . . . . . . . . . . . . 10% standard
End Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Ω max.
Resistance Taper . . . . B = linear; A = CW audio (logarithm);
C = CCW audio (logarithm)
Peak Noise (C.R.V.) . . . . . . . 3% or 3Ω, whichever is greater
Power Rating . . . . Ratings below at 40C, 0 watt at 85C
Temperature Range . . . . . . . . . . . . . . . . . . 10C to 85C
Taper
B
A,C
R ) 10kΩ
1.0W
0.8W
10kΩ ! R ) 50kΩ
0.8W
0.6W
50kΩ ! R ) 300kΩ
0.6W
0.3W
R 1 300kΩ
0.4W
0.2W
Temperature Characteristics . . . . . . . . 85C, 30 minutes
without load
R ) 10kΩ ➞ ∆T/R )6%
10kΩ ! R ! 1MΩ ➞ ∆T/R )10%
R 0 1MΩ ➞ ∆T/R )15%
Load Life . . . . . . . . . . . . 40C, 1,000 hours with rated load
∆T/R )10%
Moisture and Load Life . . . . . . . . . . . . 40C, 90-95%RH,
500 hours with rated load
R ! 100kΩ ➞ ∆T/R )10%~15%
R 0 100kΩ ➞ ∆T/R )10%~20%
Maximum Input Voltage . . . . . B = 500VDC; A,C = 350VDC
or power rating, whichever is smaller
Insulation Resistance . . . . . 100MΩ minimum at 1,000VDC
Dielectric Strength . . . . . . . . . . . . . . . . 1,000VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 28010
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . . 10C ~85C,
5 cycles without load
∆T/R )10%
Mechanical
Soldering Heat Resistance . . . . . . . . . . 350C, 3.5 seconds
∆T/R )2%
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . . 3005
Shaft Torque
Single Unit . . . . . . 51 to 306 gf • cm (0.707 to 4.242 oz • in)
Other Units . . . . . . 51 to 510 gf • cm (0.707 to 7.070 oz • in)
Stop Strength . . . . . . . . . . . . 10.2 kgf • cm (141.4 oz • in) max.
Mounting Nut Torque . . . . . . 15 kgf • cm (207.94 oz • in) max.
Solderability . . . . . . . . . . . . . . . . . . . . . . . 235C, 5 seconds
Marking . . . . . . . . . . . . . Model type, taper, resistance code,
shaft type, terminal identification, date code
Vibration . . . . . . . . . . . . . . . . . . .10-55Hz, 1.5mm amplitude,
3 directions, 2 hours each
∆T/R )2.5%
Rotational Life . . . . 15,000 cycles (500 cycles for shaft lock
models only) without load
∆T/R )7%
Standard Rotary Switches
Switch Rating . . . . . . . . . . 110VAC, 1A or 3A, SPDT or SPST
Contact Resistance . . . . . . . . . . . . . . . . . . . . . . 0.05Ω max.
Operating Torque . . . . . . . . 1,530 gf • cm (21.21 oz • in) max.
Operating Life . . . . . . . . . . . . . 10,000 cycles with rated load
R = Total Resistance Value; ∆T/R = Total Resistance Change
TOCOS AMERICA, INC.
44
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
RV30 Series
Dimensions
RV30YN
Unit: mm
Panel Mount, Single Unit, Single Shaft, Right Angle Ear-Lug Terminals
RV30YNHT High Torque or RV30YS Panel Seal Models available as Special Order.
Recommended
Panel Mounting Holes
RV30YL
Panel Mount, Single Unit, Single Shaft with Shaft Lock
Right Angle Ear-Lug Terminals
Recommended
Panel Mounting Holes
RV30YNSE & RV30YNSF
Panel Mount, Single Unit with Switch, Single Shaft
Right Angle Ear-Lug Terminals, Rear Exit Lug Terminals for 1A or 3A SPST Switch
Recommended
Panel Mounting Holes
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
45
E-mail: sales@tocos.com
www.tocos.com
RV30 Series
Dimensions
RV30YNME & RV30YNMF
Unit: mm
Panel Mount, Single Unit with Switch, Single Shaft
Right Angle Ear-Lug Terminals, Rear Exit Lug Terminals for 1A or 3A SPDT Switch
Recommended
Panel Mounting Holes
RV30YG
Panel Mount, Ganged Tandem Unit, Single Shaft
Right Angle Ear-Lug Terminals on Each Unit
Recommended
Panel Mounting Holes
RV30YGL
Panel Mount, Ganged Tandem Unit, Single Shaft with Shaft Lock
Right Angle Ear-Lug Terminals on Each Unit
Recommended
Panel Mounting Holes
TOCOS AMERICA, INC.
46
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
RV30 Series
Dimensions
RV30YGSE, RV30YGSF, RV30YGME & RV30YGMF
Unit: mm
Panel Mount, Ganged Tandem Unit with Switch, Single Shaft
Right Angle Ear-Lug Terminals on Each Unit
Rear Exit Lug Terminals for 1A or 3A SPST or SPDT Switch
Recommended
Panel Mounting Holes
RV30YT
Panel Mount, Triple Unit, Single Shaft
Right Angle Ear-Lug Terminals on Each Unit
Recommended
Panel Mounting Holes
RV30YD
Panel Mount, Dual Unit, Dual Concentric Shaft
Right Angle Ear-Lug Terminals on Each Unit
Recommended
Panel Mounting Holes
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
47
E-mail: sales@tocos.com
www.tocos.com
RV30 Series
Part Numbering System
RV 30 Y N ME 20 S
B 103 K
NOTE: FMS = From Mounting Surface
Resistance Tolerance: K = 10% (standard).
Resistance Code: Expressed in ohms. A three digit code where the first
two digits are significant figures, and the third digit indicates the number
of zeros that follow these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω;
103 = 10,000Ω; 105 = 1,000,000Ω ). See table for standard resistance values.
For Single Unit:
Specify taper and resistance code as shown.
For Ganged Tandem Unit or Dual Unit:
Specify a taper code and resistance code for each unit starting with
the front unit followed by the rear unit. If both units have the same taper
and resistance codes, add “X2” suffix per example below.
Examples: B103A503 or if both units are the same: B103X2
For Triple Unit:
Specify a taper code and resistance code for each unit starting with
the front unit followed by the middle and rear units. If all units have the
same taper and resistance codes, add “X3” suffix per example below.
Examples: B103A503B104 or if all units are the same: B103X3
Resistance Taper: B = Linear.
A = CW Audio (logarithm).
C = CCW Audio (logarithm).
Shaft End Style: S = Slotted; F = Flatted; R = Round.
For Single Shaft:
Specify the shaft length (FMS) and shaft end style as shown.
For Dual Concentric Shaft:
Specify the shaft length (FMS) and shaft end style for the inner shaft
followed by the shaft length (FMS) and shaft end style for the outer
shaft. Use a dash (-) to separate the code groups for the inner and
outer shaft specifications. Example: 30R-20R
Standard Shaft Length: 15 = 15 mm FMS.
20 = 20mm FMS.
Up to 50mm shaft length available (special order ).
Switch Type: ME = SPDT, 110VAC, 1A, Rear Exit Lug Terminals.
MF = SPDT, 110VAC, 3A, Rear Exit Lug Terminals.
SE = SPST, 110VAC, 1A, Rear Exit Lug Terminals.
SF = SPST, 110VAC, 3A, Rear Exit Lug Terminals.
Blank = No Switch.
Style: N = Panel Mount, Single Unit, Single Shaft, Right Angle Ear-Lug
Terminals.
L = Panel Mount, Single Unit, Single Shaft with Shaft Lock,
Right Angle Ear-Lug Terminals.
G = Panel Mount, Ganged Tandem Unit, Single Shaft, Right Angle
Ear-Lug Terminals on Each Unit.
GL = Panel Mount, Ganged Tandem Unit, Single Shaft with Shaft
Lock, Right Angle Ear-Lug Terminals on Each Unit.
T = Panel Mount, Triple Unit, Single Shaft, Right Angle Ear-Lug
Terminals on Each Unit.
D = Panel Mount, Dual Unit, Dual Concentric Shaft, Right Angle
Ear-Lug Terminals on Each Unit.
Operating Temperature Range: Y = 10C to 85C.
Size: 30 = 30mm Diameter.
TOCOS Series Name: RV = Carbon Film Element.
Standard Resistance Values and Part Numbering Codes
Standard Nominal Total Resistance Values and Part Numbering Codes
Resistance ( Ω )
Code
Resistance ( Ω )
Code
Resistance ( Ω )
Code
Resistance ( Ω )
Code
Resistance ( Ω )
Code
100
200
500
501
201
501
1,000
2,000
5,000
102
202
502
10,000
20,000
50,000
103
203
503
100,000
200,000
500,000
104
204
504
1,000,000
2,000,000
5,000,000
105
205
505
Refer to Shaft End Styles Specifications and Hardware Specifications for details and availability.
For additional information, refer to Guidelines and Precautions for Using Panel Controls.
TOCOS AMERICA, INC.
48
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com