Sine Wave TCXO S3-AA22X Series 0551B Rev D S3-AA22X Series Frequency Range: 200 MHz to 1.7 GHz Description The S3-AA22X Series of temperature compensated quartz crystal oscillators provide a Sine Wave signal. Features Size, mm 14 x 17 I/O 8 pad Supply Voltage • Cover connected to ground • Will withstand SMD reflow temperatures of 183°C for 4 minutes maximum • High shock resistance, to 1000g • Wide frequency range – 200MHz to1.7GHz • User specified tolerance available • 3.3V • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions 3.3V • Patent Pending, harmonic multiplication for extremely low jitter • High frequency output eliminates the need for PLL multiplication Creating a Part Number S3 - AA22X - FREQ Package Code S3 8 pad 14x17mm SMD Tolerance/Performance 9 Customer Specific D ±10ppm -40 to +85°C E ±2.5ppm -40 to +85°C F ±1ppm -40 to +85°C Input Voltage Code Specification A 3.3V Drawing Specifications 0.670 (17.02) 0.551 Pin 1 Indicator (14.00) 0.156 (3.96) 0.100 (2.54) 1 2 3 4 8 7 6 5 0.050 (1.27) For the most up to date specifications on each NEL product, log on to our website—www.nelfc.com 0.167 (4.24) Dimensions shown in inches and (mm). It measures 0.088 x 0.190 (2.24 x 4.83). Electrical Connections Pin Connection 1 VCC 2 Ground 3 NC 4 NC 5 Q Output 6 /Q Output 7 NC 8 NC/VC 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone: 262-763-3591 Fax: 262-763-2881 Email: [email protected] www.nelfc.com Sine Wave TCXO S3-AA22X Series 0551B Rev D Frequency Range: 200 MHz to 1.7 GHz Operating Conditions and Output Characteristics Electrical Characteristics Parameter Symbol Frequency Harmonic Spurious Nonharmonic Spurious Output Voltage Jitter, RMS(5) Frequency Stability (1) Phase Noise(2) Aging — — — VP-P — dF/F — — — — — — — General Characteristics Parameter Symbol Conditions Min Typical Max — — — — — Overall conditions including: voltage, calibration, temp., shock, vibration @100Hz @1kHz @10kHz @100kHz @1MHz @10MHz 10 years 200MHz — — 0.60V — -2.5ppm — -25 dBc — 0.85V 0.3 psec — 1.7GHz -20 dBc -60 dBc — 0.5 psec +2.5ppm — — — — — — — — — — — — — — -80 dBc/Hz -115 dBc/Hz -130 dBc/Hz -130 dBc/Hz -135 dBc/Hz -135 dBc/Hz ±10ppm Conditions Supply Voltage VCC 3.3V ±5% Supply Current ICC 50 ohm termination Output Current IO Low level Output Current Operating Temperature TA — Storage Temperature TS — Lead Temperature TL Soldering, 10 sec. Load (4) 50 Ohm termination Start-up Time tS — Min Typical Max 3.135V 0.0 mA 0.0 mA -40°C -55°C — 3.3V — — — — — 3.465V 90 mA ±50.0 mA 85°C 125°C 300°C — 2 ms 10 ms Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060” double amplitude 10 Hz to 55 Hz, 35g’s 55 Hz to 2000 Hz 300ºC for 10 seconds Footnotes: 1) Standard frequency stability for S3-AA22E (others available). 2) Phase Noise characterization available. Phase noise is frequency dependant, phase noise specification references a 1.0GHz part. 4) Internally AC coupled output. 5) Jitter performance is frequency dependent. Please contact factory for full Aeroflex characterization. RMS jitter bandwidth of 12kHz to 20MHz.