SB2540CT-AU SCHOTTKY BARRIER RECTIFIERS VOLTAGE 40 Volts CURRENT 25 Amperes FEATURES 0.419(10.66) 0.387(9.85) • Plastic package has Underwriters Laboratory 0.196(5.00) 0.163(4.16) 0.139(3.55) MIN. Flammability Classification 94V-O. 0.054(1.39) 0.045(1.15) 0.624(15.87) • Low power loss, high efficiency. • Low forward voltage, high current capability 0.548(13.93) Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 free wheeling , and polarlity protection applications. 0.038(0.96) 0.019(0.50) • Acqire quality system certificate : TS16949 • AEC-Q101 qualified • Lead free in comply with EU RoHS 2002/95/EC directives 0.100(2.54) MAX. 0.058(1.47) 0.042(1.07) 0.50(12.7)MIN. • For use in low voltage,high frequency inverters 0.177(4.5) • High surge capacity. 0.115(2.92) 0.080(2.03) 0.025(0.65)MAX. 0.100(2.54) MECHANCEAL DATA • Case: TO-220AB Molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: As marked. • Standard packaging: Any • Weight: 0.0655 ounces, 1.859 grams. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% PA RA ME TE R S YMB OL VA L UE UNITS Ma xi m um Re c ur re nt P e a k Re ve rs e Vo lta g e V RRM 40 V Ma xi m um RMS Vo lt a g e V RM S 28 V Ma xi m um D C B lo c k i ng Vo lta g e V DC 40 V Ma xi m um A ve r a g e F o rwa rd C urre nt I F ( AV ) 25 A P e a k F o rwa rd S ur g e C urr e nt : 8 .3 ms s i ng le ha lf s i ne - wa ve s up e ri mp o s e d o n r a te d lo a d (J E D E C me tho d ) IF S M 200 A Ma xi m um F o r wa rd Vo lta g e a t 1 2 .5 A p e r le g VF 0 .5 5 V IR 0 .2 100 mA R θJ C 2 TJ -5 5 to +1 5 0 T S TG -5 5 to +1 5 0 Ma xi m um D C Re ve r s e C ur re nt a t Ra te d D C B lo c k i ng Vo lta g e Typ i c a l The r ma l Re s i s ta nc e Op e r a ti ng J unc t i o n Te mp e ra t ure Ra ng e S to r a g e Te m p e ra ture Ra ng e T J = 2 5 OC TJ= 1 0 0 OC O C / W O C C NOTE: Both Bonding and Chip structure are available. August 25,2010-REV.03 PAGE . 1 SB2540CT-AU 25 20-30V 40-60V 20 15 10 5 0 0 50 150 100 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES 240 8.3ms Single Half Sine-Wave JEDEC Method 210 180 150 120 90 60 30 0 1 2 O 5 10 20 50 100 NO. OF CYCLE AT 60Hz CASE TEMPERATURE, C Fig.1- FORWARD CURRENT DERATING CURVE Fig.2- MAXIMUM NON - REPETITIVE SURGE CURRENT INSTANTANEOUS FORWARD CURRENT AMPERES INSTANTANEOUS REVERSE CURRENT, mA 10 T J=100 OC 1.0 T J=75 OC 0.1 O T J=25 C 0.01 0.001 0 20 40 60 80 20-45V 50-60V 10 8 6 4 2 1.0 0.8 0.6 0.4 1% Duty Cycle Pulse Width=300 m s T J =25 OC 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 100 PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) Fig.3- TYPICAL REVERSE CHARACTERISTIC August 25,2010-REV.03 40 INSTANTANEOUS FORWARD VOLTAGE ,VOLTS Fig.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PAGE . 2 SB2540CT-AU Part No_packing code_Version SB2540CT-AU_T0_000A1 SB2540CT-AU_T0_100A1 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING August 25,2010-REV.03 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 SB2540CT-AU Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. August 25,2010-REV.03 PAGE . 4