ER2002ST ISOLATION SUPERFAST RECOVERY RECTIFIER VOLTAGE 200 Volts CURRENT 20 Amperes 0.615(15.60)MAX. FEATURES 0.520(13.20) 0.504(12.80) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. 0.185(4.70) 0.169(4.30) • High surge capacity. • Super fast recovery times, high voltage. • Epitaxial chip construction. • Lead free in comply with EU RoHS 2002/95/EC directives 0.071(1.80) 0.055(1.40) 0.095(2.40) 0.078(2.00) 0.050(1.25) 0.037(0.95) 0.118(3.0) MIN. 0.599(15.20) 0.582(14.80) 0.577(14.65) 0.565(14.35) 0.776(19.70) 0.759(19.30) • Low forward voltage, high current capability 0.579(14.70) 0.563(14.30) • Low power loss, high efficiency. 0.166(4.20) 0.149(3.80) 0.732(18.58) 0.715(18.18) • Exceeds environmental standards of MIL-S-19500/228 0.516(13.20) 0.504(12.80) 0.402(10.20) 0.385(9.80) 0.025(0.62) 0.014(0.38) MECHANICAL DATA • Case: TO-3PS Molded plastic 0.223(5.65) 0.206(5.25) 0.103(2.60) 0.090(2.30) 0.223(5.65) 0.206(5.25) • Terminals: Lead solderable per MIL-STD-750, Method 2026 • Polarity: As marked. • Standard packaging: Any • Weight: 0.1932 ounces, 5.48 grams. MAXIMUM RATING AND ELECTRICAL CHARACTERISTICSS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% PARAMETER SYMBOL VALUE UNITS Maximum Recurrent Peak Reverse Voltage VRRM 200 V Maximum RMS Voltage VRMS 140 V Maximum DC Blocking Voltage VDC 200 V Maximum Average Forward Current per device per diode IF(AV) 20 10 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load (JEDEC method) per diode IFSM 150 A Maximum Forward Voltage at 10A per diode VF 1 V Maximum DC Reverse Current at Rated DC Blocking Voltage per diode IR 10 μA trr 25 ns RθJC 2 TJ,TSTG -55 to +150 Maximum Reverse Recovery Time (Note 1) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range per diode O C/W O C NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A. 2. Semi-infinite heatsink. August 3,2012-REV.00 PAGE . 1 12 10 8 6 4 2 0 0 25 50 75 100 125 150 CJ, Junction Capacitance (pF) IF, Forward Current (A) ER2002ST 1000 100 10 1 0.1 TC, Case Temperature (°C) 100 TJ = 150°C IF, Forward Current (A) IR, Reverse Current (uA) 100 Fig.2 Typical Junction Capacitance 100 10 TJ = 125°C 0.1 10 VR, Reverse Bias Voltage (V) Fig.1 Forward Current Derating Curve 1 1 TJ = 75°C 0.01 TJ = 25°C 0.001 TJ = 150°C 10 TJ = 125°C 1 TJ = 25°C 0.1 TJ = 75°C 0.01 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics August 3,2012-REV.00 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 ER2002ST Part No_packing code_Version ER2002ST_T0_00001 ER2002ST_T0_10001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING August 3,2012-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 ER2002ST Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. August 3,2012-REV.00 PAGE . 4