DIODES SBR02U30LP-7

SBR02U30LP
0.2A SBR®
SUPER BARRIER RECTIFIER
Please click here to visit our online spice models database.
Features
Mechanical Data
•
•
•
•
•
•
•
•
•
NEW PRODUCT
Ultra Low Forward Voltage
Excellent High Temperature Stability
Patented Super Barrier Rectifier Technology
Soft, Fast Switching Capability
Lead Free Finish, RoHS Compliant (Note 1)
“Green” Molding Compound (No Br, Sb)
Qualified to AEC-Q101 Standards for High Reliability
•
•
•
•
•
•
Case: DFN1006-2 (Equivalent to SOD-882)
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020D
Polarity Indicator: Cathode Dot
Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
Marking Information: See Page 3
Ordering Information: See Page 3
Weight: 0.001 grams (Approximate)
Bottom View
Top View
Maximum Ratings
@TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VRM
IO
Value
Unit
30
V
0.2
A
IFSM
5.0
A
Symbol
Value
Unit
RθJS
RθJA
18
263
ºC/W
TJ, TSTG
-65 to +150
ºC
Thermal Characteristics
Characteristic
Typical Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
Operating and Storage Temperature Range
Electrical Characteristics
Characteristic
@TA = 25°C unless otherwise specified
Symbol
Min
Forward Voltage Drop
VF
-
Leakage Current (Note 4)
IR
-
Notes:
Typ
0.34
0.39
Max
0.40
0.48
0.45
Unit
4
0.5
50
10
µA
mA
V
Test Condition
IF = 0.1A, TJ = 25ºC
IF = 0.2A, TJ = 25ºC
IF = 0.2A, TJ = 125ºC
VR = 30V, TJ = 25ºC
VR = 30V, TJ = 125ºC
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html.
2. Theoretical RθJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR is a registered trademark of Diodes Incorporated.
SBR02U30LP
Document number: DS31715 Rev. 2 - 2
1 of 4
www.diodes.com
July 2009
© Diodes Incorporated
SBR02U30LP
IF, INSTANTANEOUS FORWARD CURRENT (A)
PD, POWER DISSIPATION (W)
0.5
0.4
0.3
0.2
0.1
0
0
0.2
0.4
0.6
0.8
IF(AV), AVERAGE FORWARD CURRENT (A)
10
1
0.1
0.01
0.001
0.0001
0.00001
1
0
200
400
600
800
1,000
VF, INSTANTANEOUS FORWARD VOLTAGE (mV)
Fig. 2 Typical Forward Characteristics
100,000
1,000
CT, TOTAL CAPACITANCE (pF)
IR, INSTANTANEOUS REVERSE CURRENT (µA)
Fig. 1 Forward Power Dissipation
10,000
1,000
100
100
10
1
10
0
10
20
30
40
50
60
0.1
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 3 Typical Reverse Characteristics
TA, DERATED AMBIENT TEMPERATURE (°C)
0.25
IF(AV), AVERAGE FORWARD CURRENT(A)
NEW PRODUCT
0.6
Note 3
0.2
0.15
0.1
0.05
1
10
100
VR, DC REVERSE VOLTAGE (V)
Fig. 4 Total Capacitance vs. Reverse Voltage
150
125
100
75
50
25
0
0
0
25
50
75 100 125 150 175
TA, AMBIENT TEMPERATURE (°C)
Fig. 5 Forward Current Derating Curve
200
SBR is a registered trademark of Diodes Incorporated.
SBR02U30LP
Document number: DS31715 Rev. 2 - 2
2 of 4
www.diodes.com
0
3
6
9 12 15 18 21 24 27 30
VR, DC REVERSE VOLTAGE (V)
Fig. 6 Operating Temperature Derating
July 2009
© Diodes Incorporated
SBR02U30LP
Ordering Information
(Note 5)
Part Number
SBR02U30LP-7
Notes:
Case
DFN1006-2
Packaging
3000/Tape & Reel
5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
NEW PRODUCT
Marking Information
23 = Product Type Marking Code
Dot Denotes Cathode Side
Package Outline Dimensions
A
A1
D
R
E
b
L
DFN1006-2
Dim
Min
Max
Typ
A
0.47
0.53
0.50
A1
0
0.05
0.03
b
0.45
0.55
0.50
D
0.95
1.075
1.00
E
0.55
0.675
0.60
e
0.40
L
0.20
0.30
0.25
R
0.05
0.15
0.10
All Dimensions in mm
e
Suggested Pad Layout
C
Dimensions Value (in mm)
Z
1.1
G
0.3
X
0.7
Y
0.4
C
0.7
X
Y
G
Z
SBR is a registered trademark of Diodes Incorporated.
SBR02U30LP
Document number: DS31715 Rev. 2 - 2
3 of 4
www.diodes.com
July 2009
© Diodes Incorporated
SBR02U30LP
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
SBR is a registered trademark of Diodes Incorporated.
SBR02U30LP
Document number: DS31715 Rev. 2 - 2
4 of 4
www.diodes.com
July 2009
© Diodes Incorporated