SBR8U60P5 8A SBR® SUPER BARRIER RECTIFIER PowerDI®5 Please click here to visit our online spice models database. NEW PRODUCT Features • • • • • • Mechanical Data ® • • Ultra Low Forward Voltage Drop Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Below Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.093 grams (approximate) • • • • • • LEFT PIN RIGHT PIN Top View Maximum Ratings BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Bottom View @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current @TC = 140ºC Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO Value Unit 60 V 8 A IFSM 280 A Symbol Value Unit RθJS RθJA TJ, TSTG 3 60 ºC/W -65 to +150 ºC Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Electrical Characteristics Characteristic @TA = 25°C unless otherwise specified Symbol Forward Voltage Drop VF Leakage Current (Note 4) IR Notes: Min - Typ 0.30 0.46 - Max 0.35 0.53 0.5 - 0.12 - 0.6 100 Unit V mA Test Condition IF = 1.0A, TJ = 25ºC IF = 8A, TJ = 25ºC IF = 8A, TJ = 125ºC VR = 60V, TJ = 25ºC VR = 60V, TJ = 125ºC 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Theoretical RθJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect. SBR and PowerDI are registered trademarks of Diodes Incorporated. 1 of 4 SBR8U60P5 Document number: DS31731 Rev. 3 - 2 www.diodes.com April 2009 © Diodes Incorporated IR, INSTANTANEOUS REVERSE CURRENT (µA) IF, INSTANTANEOUS FORWARD CURRENT (A) 10 TA = 150°C TA = 125°C 1 T A = 85°C 0.1 TA = 25°C 0.01 TA = -55°C 0.001 0.0001 0 100,000 T A = 150°C 10,000 T A = 125°C TA = 85°C 1,000 100 100 200 300 400 500 600 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.1 Typical Forward Characteristics TA = 25°C 10 0 10 20 30 40 50 60 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 10,000 f = 1MHz CT, TOTAL CAPACITANCE (pF) NEW PRODUCT SBR8U60P5 1,000 100 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance Ordering Information (Note 5) Part Number SBR8U60P5-13 Notes: Case ® PowerDI 5 Packaging 5000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information S8U60 YYWWK S8U60 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week Code 01 to 52 K = Factory Designator SBR and PowerDI are registered trademarks of Diodes Incorporated. 2 of 4 SBR8U60P5 Document number: DS31731 Rev. 3 - 2 www.diodes.com April 2009 © Diodes Incorporated SBR8U60P5 Package Outline Dimensions A ® D A2 b2 NEW PRODUCT D2 L E E2 E1 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout Z C E1 X2 X1 Y2 Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 Y1 SBR and PowerDI are registered trademarks of Diodes Incorporated. 3 of 4 SBR8U60P5 Document number: DS31731 Rev. 3 - 2 Dimensions Z X1 X2 Y1 Y2 C E1 www.diodes.com April 2009 © Diodes Incorporated SBR8U60P5 IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDING TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com SBR and PowerDI are registered trademarks of Diodes Incorporated. 4 of 4 SBR8U60P5 Document number: DS31731 Rev. 3 - 2 www.diodes.com April 2009 © Diodes Incorporated