SBR60A200CT 60A SBR® SUPER BARRIER RECTIFIER Please click here to visit our online spice models database. Features Mechanical Data • • • • • • • • • • Low Forward Voltage Drop Low Leakage Current Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 175ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 2) Also Available in Green Molding Compound (Note 5) • • • • • Case: TO-220AB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper Lead Frame. Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Ordering Information: See Page 2 Marking Information: See Page 2 Weight: 1.85 grams (approximate) TO-220AB Bottom View TO-220AB Top View Package Pin Out Configuration Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Per Device (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM Value Unit 200 V IO 30 60 A IFSM 250 A Characteristic Typical Thermal Resistance Thermal Resistance, Junction to Case (Note 3) Thermal Resistance, Junction to Ambient (Note 3) Symbol Value Unit RθJC RθJA 1.2 8.4 ºC/W Operating and Storage Temperature Range TJ, TSTG -65 to +175 ºC Thermal Characteristics (Per Leg) B Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max 0.96 0.77 V μA mA Forward Voltage Drop VF - 0.91 0.74 Leakage Current (Note 1) IR - 10 2 100 20 - 38 50 Reverse Recovery Time trr Notes: Unit IF = 0.5A, IR = 1A, IRR = 0.25A ns - 25 35 Test Condition IF = 30A, TJ = 25ºC IF = 30A, TJ = 125ºC VR = 200V, TJ = 25ºC VR = 200V, TJ = 125ºC IF = 1A, VR = 30V di/dt = 100A/μs, TJ = 25ºC 1. Short duration pulse test used to minimize self-heating effect. 2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 3. Device mounted on heatsink (Black Aluminum, 50mm x 37mm x 15mm) SBR is a registered trademark of Diodes Incorporated. SBR60A200CT Document number: DS31243 Rev. 4 - 2 1 of 3 www.diodes.com December 2009 © Diodes Incorporated SBR60A200CT IR, INSTANTANEOUS REVERSE CURRENT (mA) 100 10 1 0.1 0.01 0.001 10 TA = 175°C TA = 125°C 1 TA = 85°C 0.1 0.01 T A = 25°C 0.001 TA = -55°C 0.0001 0 IF(AV), AVERAGE FORWARD CURRENT (A) 60 30 60 90 120 150 180 VR, INSTANTANEOUS REVERSE VOLTAGE (V) R θJA = R θJC Total Device 50 40 30 RθJA = RθJC Per Element 20 10 0 25 RθJA = 8°C/W Per Element Note 3 50 75 100 125 150 TA, CASE TEMPERATURE (°C) Fig. 3 Forward Current Derating Curve 175 Ordering Information (Notes 4 & 5) Part Number SBR60A200CT SBR60A200CT-G Notes: Case TO-220AB TO-220AB Packaging 50 pieces/tube 50 pieces/tube 4. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 5. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR60A200CT-G. Marking Information SBR60A200CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 07 = 2007) WW = Week (01-52) SBR 60A200CT YYWW AB SBR is a registered trademark of Diodes Incorporated. SBR60A200CT Document number: DS31243 Rev. 4 - 2 2 of 3 www.diodes.com December 2009 © Diodes Incorporated SBR60A200CT Package Outline Dimensions A E A1 Q SEATING PLANE P 16.00 ± 0.20* H1 D D1 L1 L b2 b e e1 c A2 *Guaranteed by TO-220AB leadframe design TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR60A200CT Document number: DS31243 Rev. 4 - 2 3 of 3 www.diodes.com December 2009 © Diodes Incorporated