SBYG20DG THRU SBYG20JG SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE： ：200 to 600V CURRENT： ：1.5A SMA／ ／DO-214AC FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief Low reverse current Soft recovery characteristics High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast reverse recovery time MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：Color band denotes cathode Marking：G20D G20G G20J Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, date current by 20％) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Tj =25℃ at rated DC blocking voltage Tj =100℃ Maximum Reverse Recovery Time (Note1 ) Pulse energy in avalanche mode, non repetitive(inductive load switch off) (Note 2) Typical Thermal Resistance (Note 3) (Note 4) Storage and Operating Junction Temperature SYMBOL SBYG20DG SBYG20GG SBYG20JG units Vrrm Vrms Vdc If(av) 200 140 200 400 280 400 1.5 600 420 600 V V V A Ifsm 50.0 A Vf 1.4 V Trr 1.0 10.0 75 Ersm 20 Rth(jl) Rth(ja) Tstg, Tj 25.0 150 -50 to +150 Ir µA nS mJ K/W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. I(BR)R=1.0A, Tj=25℃ 3. TL=const. 3. Thermal Resistance from Junction to terminal mounted on epoxy-glass hard tissue Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SBYG20DG THRU SBYG20JG Rev.A1 www.gulfsemi.com