SHP5 SERIES Single and dual output • • • • • • 3 to 5 Watts in DIL package 32 models including 2.1V and 3.3V outputs Wide input ranges 4.5-9V, 9-18V, 18-36V and 36-72V EN55022 conducted emissions level B Operating temperature range -25°C to +50°C Input voltage range to ETS300-132-2 The SHP5 Series of DC/DC converters is designed to offer the optimum cost/benefit power solution for a wide variety of applications including public and private telecommunications, industrial systems and process and test equipment. The series consists of 32 models in a DIL package with input voltages of 4.5-9VDC, 9-18VDC, 1836VDC and 36-72VDC. The SHP5 offers standard 5V, 12V and 15V in single and dual outputs. 2.1V and 3.3V single outputs are also available suitable for low voltage logic applications. Optional filtering to EN55022 level B conducted emissions and low output ripple minimize design-in time, cost and eliminate the need for external components. [ 2 YEAR WARRANTY ] SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage accuracy ±2.0% Conducted emissions EN55022, EN55011, FCC Suffix ‘-F’ versions, See Note 1 EN55022 Level B Line regulation LL to HL, all outputs ±0.1% Load regulation Min. load to full load ±0.3% Cross regulation Asymmetrical load 25% / 100% FL 4.0% max. 2.1V, 3.3V, 5V Single 12V, 15V Dual 50mA max. 80mA max. 80mA max. Isolation voltage Input/output 500VDC Isolation resistance Input/output 108Ω Overshoot At start-up 3.0% max. Isolation capacitance Input/output 1nF Ripple and noise 20MHz bandwidth Switching frequency Fixed Transient response 25% load step Approvals and standards (pending) Safety Radiated emissions Level B GENERAL SPECIFICATIONS Minimum load Efficiency 1.0% pk-pk, max. 75mV rms ±10% max. dev., 1ms recovery to within ±1.0% Temperature coefficient Short circuit protection ±0.02%/°C 1 minute Automatic recovery Input filter 5VDC nominal, FL 12VDC nominal, FL 24VDC nominal, FL 48VDC nominal, FL Suffix ‘-F’ See Note 1 Input current Input reflected ripple Start-up time PAGE 1 Case material VDE0805, EN60950 IEC950, UL1950 CSA C22.2 No. 950 Black coated, metal case Material flammability 4.5 to 9VDC 9 to 18VDC 18 to 36VDC 36 to 72VDC MTBF UL94V-0 MIL-HDBK-217F 250,000 hours Thermal performance Operating ambient -25°C to +50°C (See derating curve) Extended temp., -40°C to +50°C option, See Note 3 Non-operating amb. -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Relative humidity Non-condensing Altitude Operating Non operating 10,000 feet max. 40,000 feet max. Vibration 5Hz to 500Hz 2.5G rms (approx.) Common mode and Pi type 20mA 20mA 5ms 16g (0.56oz) ENVIRONMENTAL SPECIFICATIONS See table Single output Dual and triple outputs 200 to 250kHz Weight INPUT SPECIFICATIONS Input voltage range 78% typ. 30% to 95% DC/DC CONVERTERS | 3-5W DC/DC 3 to 5 Watt Wide input DC/DC converters INPUT OUTPUT OUTPUT INPUT TYPICAL REGULATION (Typ.) VOLTAGE VOLTAGE CURRENT CURRENT EFFICIENCY LINE LOAD 4.5-9VDC 2.1V 1000mA 724mA 58% ±0.1% ±0.3% SHP5-05S2V1 (4) 4.5-9VDC 3.3V 1000mA 956mA 69% ±0.1% ±0.3% SHP5-05S3V3 (4) 4.5-9VDC 5.0V 600mA 769mA 75% ±0.1% ±0.3% SHP5-05S05 (4) 4.5-9VDC 12V 250mA 800mA 75% ±0.1% ±0.3% SHP5-05S12 (4) 4.5-9VDC 15V 200mA 800mA 75% ±0.1% ±0.3% SHP5-05S15 (4) 4.5-9VDC ±5.0V ±300mA 800mA 75% ±0.1% ±0.3% SHP5-05D05 (4) 4.5-9VDC ±12V ±125mA 800mA 75% ±0.1% ±0.3% SHP5-05D12 (4) 4.5-9VDC ±15V ±100mA 800mA 75% ±0.1% ±0.3% SHP5-05D15 (4) 9-18VDC 2.1V 1000mA 287mA 61% ±0.1% ±0.3% SHP5-12S2V1 9-18VDC 3.3V 1000mA 387mA 71% ±0.1% ±0.3% SHP5-12S3V3 9-18VDC 5.0V 1000mA 534mA 78% ±0.1% ±0.3% SHP5-12S05 9-18VDC 12V 420mA 534mA 78% ±0.1% ±0.3% SHP5-12S12 9-18VDC 15V 350mA 534mA 78% ±0.1% ±0.3% SHP5-12S15 9-18VDC ±5.0V ±300mA 333mA 75% ±0.1% ±0.3% SHP5-12D05 9-18VDC ±12V ±210mA 545mA 77% ±0.1% ±0.3% SHP5-12D12 9-18VDC ±15V ±170mA 551mA 77% ±0.1% ±0.3% SHP5-12D15 18-36VDC 2.1V 1000mA 144mA 61% ±0.1% ±0.3% SHP5-24S2V1 18-36VDC 3.3V 1000mA 193mA 71% ±0.1% ±0.3% SHP5-24S3V3 18-36VDC 5.0V 1000mA 267mA 78% ±0.1% ±0.3% SHP5-24S05 18-36VDC 12V 420mA 267mA 78% ±0.1% ±0.3% SHP5-24S12 18-36VDC 15V 350mA 267mA 78% ±0.1% ±0.3% SHP5-24S15 18-36VDC ±5.0V ±300mA 166mA 75% ±0.1% ±0.3% SHP5-24D05 18-36VDC ±12V ±210mA 272mA 77% ±0.1% ±0.3% SHP5-24D12 18-36VDC ±15V ±170mA 275mA 77% ±0.1% ±0.3% SHP5-24D15 36-72VDC 2.1V 1000mA 71mA 61% ±0.1% ±0.3% SHP5-48S2V1 36-72VDC 3.3V 1000mA 96mA 71% ±0.1% ±0.3% SHP5-48S3V3 36-72VDC 5.0V 1000mA 133mA 78% ±0.1% ±0.3% SHP5-48S05 36-72VDC 12V 420mA 133mA 78% ±0.1% ±0.3% SHP5-48S12 36-72VDC 15V 350mA 133mA 78% ±0.1% ±0.3% SHP5-48S15 36-72VDC ±5.0V ±300mA 83mA 75% ±0.1% ±0.3% SHP5-48D05 36-72VDC ±12V ±210mA 136mA 77% ±0.1% ±0.3% SHP5-48D12 36-72VDC ±15V ±170mA 136mA 77% ±0.1% ±0.3% SHP5-48D15 DERATING CURVE 1 Output Power (Watts) 2 3 4 An optional internal filter is available, which will meet EN55022 level B. Add the suffix ‘-F’ to the model number, e.g. SHP5-12S05-F. The suffix ‘-F’ option is not available on the 5VDC input models. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Extended operating temperature range is available as an option. To specify a SHP5 that operates down to -40°C, add the suffix ‘-4’ to the model number, e.g. SHP5-12S05-4. 5VDC input, max. 3 Watts output power. Output Power (Watts) Notes MODEL NUMBER 50°C 5W 90°C 0W -25°C 0°C 20°C 40°C 60°C 80°C 100°C 120°C Ambient Temperature (°C) http://www.artesyn.com PAGE 2 3-5W DC/DC | DC/DC CONVERTERS 3 to 5 Watt Wide input DC/DC converters PIN CONNECTIONS PIN NUMBER SINGLE OUTPUTS DUAL OUTPUT 2 - Input - Input 9 No Connection Common 11 No Pin - Output 14 + Output + Output 16 - Output Common 23 + Input + Input 0.24 (6.10) 0.80 (20.32) 0.41 (10.41) 0.10 (2.54) 0.10 (2.54) 0.60 (15.24) 0.18 (4.47) 2 23 Ø 0.02 Dia. (0.51) 0.70 (17.78) BOTTOM VIEW 1.25 (31.80) 16 9 14 11 0.20 (5.08) 0.18 (4.47) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions DS_SHP5_19980401.PDF PAGE 3