September 4, 2008 SMD GATE DRIVE TRANSFORMERS SM580 Series & SM76760 Features z z z z Low Profile Surface Mount Design Metal Cover Gives Improved EMI Shielding Operating Temp. -40°C to +130°C Tinned Leads with Leaded Solder is Available (Note 4) Part Number Turns Ratio ±1% Primary Inductance (µH MIN) SM580-1 1:1 330 SM580-2 1 : 1.5 330 SM580-3 1:1:1 330 SM76760 2:1:1 330 Leakage Inductance (µH MAX) 2.2 (1-6) short (3-4) 2.2 (1-6) short (3-4) 2.2 (1-6) short (2-5) & (3-4) 2.2 (1-6) short (2-5) & (3-4) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) VµS (Typ) HIPOT Pri-Sec Schematic 2.8 3.2 21 1500 B 2.8 4.2 21 1500 B 21 15006 A 22.2 15006 A 2.8 2.0 2.8 (2-5) & (3-4) 1.2 (2-5) & (3-4) MECHANICAL OUTLINE .330 8,38 .315 MAX 8,00 2 3 DATATRONICS P/N 1 2 .050 1,27 .060 1,52 6 1 5 3 5 6 4 .024 0,61 SUGGESTED PAD LAYOUT .100 2,54 4 SCHEMATIC A q .260 MAX 6,60 .170 MAX 4,31 .060 1,52 Notes: 1. 2. 3. 4. 5. 6. .146 3,70 .073 1,85 1 3 6 4 SCHEMATIC B All dimensions are in inches/mm Unless otherwise specified, tolerance is ± .010/0,25 Coplanarity is 0.004/0,102 For non-RoHS parts replace the SM prefix with 42- (e.g. SM580-1 becomes 42-580-1) Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C Secondary HIPOT 500 VDC between winding on SM580-3 & SM76760 DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel 951-928-7700, Toll free 888-889-5391, FAX 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.