SM7700H SERIES n CMOS COMPATIBLE WITH TRI−STATE OUTPUT n SURFACE MOUNT OSCILLATORS IN CERAMIC PACKAGE (7x5x1.9 mm) STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Operable Supply Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise & Fall Time (Tr & Tf) & Jitter Logic “1” & Logic “0” (See next page) Output Load Tri-state Output Packaging (see page R1, Figure 4) 1.500 MHz – 69.999 MHz (Consult factory for specific available frequencies) ± 50 PPM is standard, but ± 25 PPM is also available for certain frequencies. 0 - 70°C is standard, but can be extended to −40 to +85°C for certain frequencies 1.500 MHz – 30.000 MHz 30.001 MHz – 69.999 MHz SM7700HY SM7700HY SM7700HV 5 Volt ± 10% or 3.3 Volt ± 10% 5 Volt ± 10% only 3.3 Volt ± 10% only 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. 15 pF is standard. Contact factory for heavier loads. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic “1”; High-Impedance Output when pin #1 is at logic “0”. 16 mm tape, 178 mm, 254 mm or 330 mm reel: 1000 parts per reel. For quantities <250: 100 parts per tray PART NUMBERING GUIDE: n The Pletronics part number for an SM7700H series oscillator consists of the following 3 elements: 1. Overall Frequency Stability over Operating Temperature Range: SM7745H: ± 50 PPM; SM7744H: ± 25 PPM 2. Optional Alphabet Designator for Special Requirement: SM7745HY: standard specifications; SM7745HE: operating temperature range of -40 to +85°C; SM7745HS: 45/55% symmetry at 50% of Vcc (CMOS); SM7745HV: operates at Vcc = 3.3V (only needed for over 30.000MHz) (There are other alphabet designators not listed here.) 3. Frequency of Operation in MHz EXAMPLES: SM7745HV-50.000 MHz; SM7745HE-10.000 MHz; SM7744HY-50.000 MHz n When customer’s requirements are non-standard, a special engineering part number will be assigned. (continued) Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: [email protected] O9A SM7700H SERIES Input Current (Icc), Rise and Fall time with 15pF Load & Jitter Frequency Range (MHz) 1.500 – 10.999 11.000 – 23.999 24.000 – 29.999 30.000 – 45.999 46.000 – 69.999 Icc (mA) Typical 5.0 10.0 15.0 20.0 37.0 Waveform Tr & Tf (nS) Maximum 10.0 15.0 20.0 25.0 45.0 Typical 4.0 4.0 3.0 3.0 3.5 Maximum 5.0 5.0 4.0 4.0 4.5 Period Jitter RMS Values (pS: 1 x 10-12 Sec) Typical Maximum 75.0 100.0 50.0 75.0 50.0 75.0 25.0 40.0 15.0 25.0 Recommended Test Circuit with CMOS Load * CL (Capacitive Load): Includes the input capacitance ** 0.01µF external by-pass filter is recommended. Package Outline (NOT TO SCALE): INCHES (MILLIMETERS) January 2000 O9B Pletronics Inc., 19013 36th Ave. W., Suite H, Lynnwood, WA 98036-5761 USA