SMN03T80IS Advanced N-Ch Power MOSFET SWITCHING REGULATOR APPLICATION Features BVDSS=800V Min. Low gate charge: Qg=19nC (Typ.) Low drain-source On resistance: RDS(on)=4.2Ω (Max.) RoHS compliant device 100% avalanche tested Ordering Information Part Number Marking Package SMN03T80IS SMN03T80 I-PAK (Short Lead) GDS I-PAK Marking Information SMN 03T80 YWW Column 1, 2: Device Code Column 3: Production Information e.g.) YWW -. YWW: Date Code (year, week) Absolute maximum ratings (TC=25C unless otherwise noted) Characteristic Symbol Rating Unit Drain-source voltage VDSS 800 V Gate-source voltage VGSS 30 V Tc=25C 3 A Tc=100C 1.83 A IDM 12 A Single pulsed avalanche energy (Note 2) EAS 200 mJ Repetitive avalanche current (Note 1) IAR 3 A Repetitive avalanche energy (Note 1) EAR 7 mJ Power dissipation PD 70 W dv/dt 4.5 V/ns Junction temperature TJ 150 C Storage temperature range Tstg -55~150 C Drain current (DC) * Drain current (Pulsed) ID * Peak diode recovery dv/dt (Note 3) * Limited only maximum junction temperature Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 1 of 8 SMN03T80IS Thermal Characteristics Characteristic Symbol Rating Unit Thermal resistance, junction to case Rth(j-c) Max. 1.78 Thermal resistance, junction to ambient Rth(j-a) Max. 110 C/W Electrical Characteristics (TC=25C unless otherwise noted) Characteristic Symbol Test Condition Min. Typ. Max. Unit 800 - - V Drain-source breakdown voltage BVDSS ID=250uA, VGS=0 Gate threshold voltage VGS(th) ID=250uA, VDS=VGS 2 - 4 V VDS=800V, VGS=0V - - 10 uA VDS=640V, Tc=125C - - 100 uA Drain-source cut-off current IDSS Gate leakage current IGSS VDS=0V, VGS=30V - - 100 nA RDS(ON) VGS=10V, ID=1.5A - 3.36 4.2 gfs VDS=30V, ID=1.5A - 3.7 - S - 696 - - 65 - Drain-source on-resistance Forward transfer conductance (Note 4) Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss - 10.2 - Turn-on delay time (Note 4,5) td(on) - 48 - (Note 4,5) tr - 36 - - 106 - - 41 - - 19 - - 4 - - 7.6 - Rise time Turn-off delay time (Note 4,5) td(off) Fall time (Note 4,5) VDD=400V, ID=3A RG=25Ω tf Total gate charge (Note 4,5) Qg Gate-source charge (Note 4,5) Gate-drain charge VDS=25V, VGS=0V, f=1.0MHz (Note 4,5) VDS=640V, VGS=10V ID=3A Qgs Qgd pF ns nC Source-Drain Diode Ratings and Characteristics (TC=25C unless otherwise noted) Characteristic Symbol Test Condition Source current (DC) IS Source current (Pulsed) ISM Integral reverse diode in the MOSFET Forward voltage VSD VGS=0V, IS=3A Reverse recovery time (Note 4,5) Reverse recovery charge (Note 4,5) trr IS=3A, VGS=0V dIF/dt=100A/us Qrr Min. Typ. Max. Unit - - 3 A - - 12 A - - 1.5 V - 372 - ns - 1.8 - uC Note: 1. Repeated rating: Pulse width limited by safe operating area 2. L=42mH, IAS=3A, VDD=50V, RG=25, Starting TJ=25C 3. ISD≤3A, di/dt≤200A/us, VDD≤BVDSS, Starting TJ=25C 4. Pulse test: Pulse width≤300us, Duty cycle≤2% 5. Essentially independent of operating temperature typical characteristics Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 2 of 8 SMN03T80IS Electrical Characteristic Curves Fig. 1 ID - VDS Fig. 2 ID – VGS Fig. 3 RDS(ON) - ID Fig. 4 IDR - VSD Fig. 5 Capacitance - VDS Fig. 6 VGS - QG Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 3 of 8 SMN03T80IS Electrical Characteristic Curves (Continue) Fig. 7 BVDSS - TJ Fig. 8 RDS(ON) - TJ Fig. 9 ID - TC Fig. 10 VGS(th) – TJ Fig. 11 Safe Operating Area Fig. 12 Zth(j-c) - t Duty = t / T Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 4 of 8 SMN03T80IS Fig. 13 Gate Charge Test Circuit & Waveform Fig. 14 Resistive Switching Test Circuit & Waveform Fig. 15 EAS Test Circuit & Waveform Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 5 of 8 SMN03T80IS Fig. 16 Diode Reverse Recovery Time Test Circuit & Waveform Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 6 of 8 SMN03T80IS Package Outline Dimensions Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 7 of 8 SMN03T80IS The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 16-AUG-11 KSD-T6Q010-000 www.auk.co.kr 8 of 8